• 제목/요약/키워드: Relative density model

검색결과 329건 처리시간 0.025초

Occurrence of Faba Bean Diseases and Determinants of Faba Bean Gall (Physoderma sp.) Epidemics in Ethiopia

  • Tekalign Zeleke;Bereket Ali;Asenakech Tekalign;Gudisa Hailu;M. J. Barbetti;Alemayehu Ayele;Tajudin Aliyi;Alemu Ayele;Abadi Kahsay;Belachew Tiruneh;Fekadu Tewolde
    • The Plant Pathology Journal
    • /
    • 제39권4호
    • /
    • pp.335-350
    • /
    • 2023
  • Physoderma fungal species cause faba bean gall (FBG) which devastates faba bean (Vicia faba L.) in the Ethiopian highlands. In three regions (Amahara, Oromia, and Tigray), the relative importance, distribution, intensity, and association with factors affecting FBG damage were assessed for the 2019 (283 fields) and 2020 (716 fields) main cropping seasons. A logistic regression model was used to associate biophysical factors with FBG incidence and severity. Amhara region has the highest prevalence of FBG (95.7%), followed by Tigray (83.3%), and the Oromia region (54%). Maximum FBG incidence (78.1%) and severity (32.8%) were recorded from Amhara and Tigray areas, respectively. The chocolate spot was most prevalent in West Shewa, Finfinne Special Zone, and North Shewa of the Oromia region. Ascochyta blight was found prevalent in North Shewa, West Shewa, Southwest Shewa of Oromia, and the South Gondar of Amhara. Faba bean rust was detected in all zones except for the South Gonder and North Shewa, and root rot disease was detected in all zones except South Gonder, South Wollo, and North Shewa of Amahara. Crop growth stage, cropping system, altitude, weed density, and fungicide, were all found to affect the incidence and severity of the FBG. Podding and maturity stage, mono-cropping, altitude (>2,400), high weed density, and non-fungicide were found associated with increased disease intensities. However, crop rotation, low weed infestation, and fungicide usage were identified as potential management options to reduce FBG disease.

지진발생시 과잉간극수압비의 증가에 따른 지중 매설구조물의 거동 (Behavior of Buried Geo-structures due to Increase of Excess Pore Water Pressure Ratio During Earthquakes)

  • 강기천
    • 한국지반공학회논문집
    • /
    • 제27권12호
    • /
    • pp.27-37
    • /
    • 2011
  • 강한 지진 발생 시 뒤채움내의 과잉간극수압의 증가에 의해 지반이 액상화 되었을 때, 주변의 액상화 지반보다 작은 단위중량을 가진 지중 매설구조물은 부상하는 현상이 발생한다. 뒤채움에서의 과잉간극수압의 증가와 지중 매설 구조물 부상량의 관계를 설명하기 위해 동적 원심모형 실험을 수행되었다. 본 연구에서는, 매설구조물의 부상현상에 영향을 미치는 요인으로써 직접요인과 간접요인이 실험에 고려되었다. 이러한 요인들 중에, 과잉간극수압비의 증가에 영향을 주는 중요한 요인은 직접요인으로써의 지하수위, 뒤채움의 상대밀도, 그리고 입력 지진가속도의 크기이다. 그리고 이 요인들은 지중 매설구조물의 부상량에도 크게 영향을 주는 것으로 나타났다.

대설피해액 추정을 위한 다중회귀 모형의 적용성 평가 - 강원도 지역을 중심으로 - (Estimation of Snow Damages using Multiple Regression Model - The Case of Gangwon Province -)

  • 권순호;정건희
    • 대한토목학회논문집
    • /
    • 제37권1호
    • /
    • pp.61-72
    • /
    • 2017
  • 자연재난에 따른 인명 및 재산피해의 증가로 재난 예방 및 대응에 대한 관심이 증가하고 있다. 우리나라에서도 1994년에서 2013년까지 지난 20년간 자연재해에 의한 피해액은 약 12조 원 중 대설에 의한 피해가 약 13%로 대설도 강우나 태풍보다는 작은 규모이나, 의미 있는 규모의 피해를 야기하고 있다는 것을 알 수 있다. 그러므로 본 연구에서는 대설피해액 추정을 위해 강원지역을 대상으로 기후관련 요인(최심적설량, 평균습도, 최저기온), 사회 경제적 요인(농촌지역인구밀도, 지역총생산량)을 독립변수로 하는 동시입력방식의 다중회귀모형을 구축하였다. 적용결과, 극한 값들에 대한 설명력이 다소 낮기는 하지만, 수정결정계수가 0.7 이상인 경우도 다수 존재하는 등 대설 발생 시 신속한 재난 대응에 활용하기에는 적용성이 충분하다고 판단된다.

지중연속벽 시공을 위한 트렌치 굴착시 지반변형에 관한 모형실험 (Model Tests on Ground Deformation during Trench Excavation for Diaphragm Walls)

  • 홍원표;이문구;이재호
    • 한국지반공학회논문집
    • /
    • 제22권12호
    • /
    • pp.77-88
    • /
    • 2006
  • 지중연속벽 시공을 위한 트렌치 굴착시 굴착배면지반의 침하거동을 규명하기 위한 모형실험을 실시하였다. 트렌치 굴착을 모사하는 모형실험장치를 제작하였으며 계측시스템을 이용하여 트렌치 굴착시 굴착배면지반의 침하를 측정하였다. 모형실험결과 트렌치 굴착시 굴착배면지반의 침하량은 굴착면에 가까워질수록 크게 증가하는 경향을 보이는 것으로 나타났다. 지반의 상대밀도가 작고, 지하수위가 높을수록 굴착시 배면지반에서의 침하량은 크게 발생하였다. 그리고, 굴착배면지반에서의 침하량은 최종 굴착깊이의 약40%에 해당하는 이격거리에서 급격하게 증가함을 알 수 있었다. 한편, 트렌치 굴착완료후 굴착면내 안정액의 수위를 저하시킬 경우 굴착측벽에서는 벌징(Bulging) 현상이 발생되고, 굴착배면지반에서는 침하현상이 발생되어 종국에는 굴착면 상부에서 지반붕괴가 발생되었다. 모형실험에서 측정된 굴착배면지반에서의 침하량은 Clough and O'Rourke(1990)에 의해 제안된 침하량보다 작게 발생하였으며, 굴착배면지반의 침하기준선은 굴착벽면 주변에서 급격하게 증가하는 쌍곡선형태로 관찰되었다.

이온화세기, 제타전위, 입자크기에 따른 속도차 침전에서의 입자간 충돌특성에 관한 연구 (A Study of Collision Characteristics in differential sedimentation according to variation of Ionic Strength, Zeta Potential and Particle Size)

  • 한무영;독고석;박중현
    • 상하수도학회지
    • /
    • 제12권1호
    • /
    • pp.81-87
    • /
    • 1998
  • The possibility of collision of two particles slowly settling one after another in water can be described using the collision efficiency factor in differential sedimentation (${\alpha}_{DS}$). ${\alpha}_{DS}$ was found to be a function of several parameters particle size, particle size ratio, Hamaker constant, density of liquid and particle, gravity acceleration. Previous researches were limited to the case when there is no electric repulsion assuming that the suspension is destabilized. In this paper, ${\alpha}_{DS}$ is calculated for the stabilized condition. The relative trajectory of two particles are calculated including hydrodynamics, attraction and repulsion forces. Ionic strength and surface potential significantly affect the collision possibility of two settling particles. Depending on the surface potential and ionic strength, ${\alpha}_{DS}$ value is divided into three regions; stable, unstable and transition zone. ${\alpha}_{DS}$ increases as the ionic strength increases, and as the surface charge decreases. This result can be used to model both destabilized and stabilized suspension incorporating the collision efficiency factors of the other coagulant mechanisms such as fluid shear and Browian motion.

  • PDF

편광 또는 무편광 패브리-페롯 레이저 다이오드의 활성층 및 주입 잠금 동작 특성 모델링 (Modeling of Active Layer and Injection-locking Characteristics in Polarized and Unpolarized Fabry-Perot Laser Diodes)

  • 정영철;이종창;조호성
    • 한국광학회지
    • /
    • 제23권1호
    • /
    • pp.42-51
    • /
    • 2012
  • 본 논문에서는 패브리 페롯 레이저 다이오드(FP-LD : Fabry-Perot LD)에서 활성층 구조에 따른 주입 잠금 특성을 비교하였다. 편광 및 무편광 다중양자우물 구조와 무편광 벌크 구조의 이득 스펙트럼 및 주입 캐리어 밀도에 따른 최대 이득 특성을 TE, TM 편광에 대하여 계산하였다. 계산된 이득 파라미터를 시영역 대신호 모델에 적용하여 FP-LD의 주입 잠금 특성을 확인한 결과, 무편광 FP-LD가 편광 FP-LD 에 비하여 RIN(Relative Intensity Noise) 특성 면에서 약 3 dB 정도 우수하고, 2.5 Gbps 변조시에 아이 특성이 훨씬 우수함을 알 수 있다.

세라믹스 분말 가압 성형 공정 변수 설계(1부: 유한요소 해석) (Design of ceramics powder compaction process parameters (Part Ⅰ : Finite element analysis))

  • 정상철;금영탁
    • 한국결정성장학회지
    • /
    • 제15권1호
    • /
    • pp.21-26
    • /
    • 2005
  • 세라믹 분말 가압 성형 공정을 전산모사 하고 패킹의 임의성과 입자 배열의 효과를 평가하기 위해서 유사한 임의 다중 입자 배열을 사용하여 2차원 막대 배열 가압 성형 모델을 도입하였다. 3개의 Al₂O₃ 입자와 3개의 Al 입자를 가지고 기공과 관련된 가압 성형 공정을 균질화 탄성계수를 사용하여 외연적 유한요소 해석하였다. 해석 결과는 이전 해석 결과 및 실험 결과와 비교하였다. 마지막으로, 분말 입자의 마찰계수와 상대밀도의 관계를 얻기 위한 해석이 수행되었다.

화양천 저서성 대형무척추동물의 물리적 서식처 적합도 산정 (Estimation on Physical Habitat Suitability of Benthic Macroinvertebrates in the Hwayang Stream)

  • 김예지;공동수
    • 한국물환경학회지
    • /
    • 제34권1호
    • /
    • pp.10-25
    • /
    • 2018
  • This study was conducted to estimate the habitat suitability of 17 benthic macroinvertebrate taxa in the Hwayang stream. Habitat Suitability Index (HSI) of benthic macroinvertebrates from the Hwayang stream was developed based on three physical habitat factors which include current velocity, water depth, and the substrate. The Weibull model was used as a probability density function to analyze the distribution of individual abundance by physical factors. The number of species and the total individual abundance increased along with the increase in current velocity. By means of Canonical Correspondence Analysis (CCA), the relative importance of each factor was determined in the following order: current velocity, water depth, and the mean diameter. The results depicted that, the most influential factor in the growth of benthic macroinvertebrates in the Hwavang system was current velocity. After comparing the analyzed results from the Hwayang stream with the resukts from the Gapyeong stream, the integrated HSI was drawn. The results indicated that current velocity and substrate had similar distributions of HSI in the two streams. This was due to the addition of unmeasured data from previous surveys, or the fact that benthic macroinvertebrates adapted to deeper waters in the Hwayang Stream. Most taxa showed a clear preference for a fast current velocity, deep water depth and coarse substrate except Baetiella, Epeorus, (mayflies), and Hydropsyche (caddisfly).

기름 유량표준장치의 개발 및 측정 불확도에 관한 연구 (A Study on the Development and the Uncertainty Analysis of Oil Flow Standard System)

  • 임기원;최종오
    • 대한기계학회논문집B
    • /
    • 제27권8호
    • /
    • pp.1071-1080
    • /
    • 2003
  • A national standard system was developed in order to calibrate and test the oil flowmeters for the petroleum field. A stop valve and a gyroscopic weighing scale were employed for the primary standard of the flow quantity. It is operated by the standing start and finish mode and the static weighing method. The model equation for uncertainty evaluation was based on the calibration principle of standard system. The sources of the uncertainties were quantified and combined according to the GUM(Guide to the Expression of Uncertainty in Measurement). It was found that the standard system had the relative expanded uncertainty of 0.04 % in the range of 18 - 350 ㎥/h. According to the uncertainty budget, the uncertainties of the fluid density and the volume of pipeline, which were temperature dependent, contributed 92% of final uncertainty in the oil flow standard system.

사각돌출형 표면거칠기가 있는 이중동심원관 내의 난류유동과 열전달 (Turbulent Fluid Flow and Heat Transfer in Concentric Annuli with Square-Ribbed Surface Roughness)

  • 안수환;이윤표;김경천
    • 대한기계학회논문집
    • /
    • 제17권5호
    • /
    • pp.1294-1303
    • /
    • 1993
  • 본 논문은 Lee의 평행평판 채널내의 난류유동 모델을 사용하여 비대칭적 경계 를 갖는 이중관내 거칠기 표면위에서의 흐름을 취급하였다. 해석에서 표면거칠기는 속도 형상에 단지 국부적으로 영향을 미친다고 가정하여 한쪽 면에서만 사각형 거칠기 요소를 가진 평행관 사이의 유동에 관해 이미 얻은 실험 관계식을 이용하였다. 거칠 기의 합성효과는 압력손실 증가에 대한 열전달 증가에 대해 거친관과 매끈한 관의 경우를 비교한 값에 의하여 알수 있었다.그러므로, 전체적 효율측면에서 유리하게 열전달률을 증가시킬수 있는 이중관내의 바람직한 인공의 거칠기형태(P/.epsilon., S/.epsilon.,.alpha., etc.)를 얻을 수 있었다.