• The Plant Pathology Journal
• /
• 제17권5호
• /
• pp.295-299
• /
• 2001

The relative density of phytoplasmas in witches'broom (WB)-infected jujube trees was investigated using compatitive polymerase chain reaction (PCR). During dormant and defoliating seasons, the densities of phytoplasmas were about the same in roots and twigs. In early growing season, the density showed the highest rates in roots, then in twigs and in petioles. however, the density was highest in petioles and the lowest in roots during actively growing season. Throughout the year, root samples did not show any serious fluctuation compared with that of t2wigs and petioles. Density was lowest during actively growing season in root samples. In contrast, petiole sample densities varied to a great extent depending on the season, very high during actively growing season, but very low during the early growing season, In twig samples, the densities were very high and almost the same in both defoliating and dormant seasons. Among the parts of the trees, phytoplsma density was the most stable in root samples throughout the year. The highest densities of phytoplasmas were about the same in all tree parts. These results suggest that the phytoplasmas may overwinter not only in roots but also in twigs, and that multiplication rate of phytoplsma becomes very high right after the early growing season.

• 한국응용곤충학회:학술대회논문집
• /
• 한국응용곤충학회 2001년도 합동 춘계 학술발표회
• /
• pp.134-134
• /
• 2001

• Geomechanics and Engineering
• /
• 제17권2호
• /
• pp.145-156
• /
• 2019

Since behaviors of loose, dense, silty sands vary under seismic loading, understanding the liquefaction mechanism of sandy soils continues to be an important challenges of geotechnical earthquake engineering. In this study, 36 deformation controlled cyclic simple shear tests were performed and the liquefaction potential of the sands was investigated using three different relative densities (40, 55, 70%), four different effective stresses (25, 50, 100, 150 kPa) and three different shear strain amplitudes (2, 3.5, 5%) by using energy based approach. Experiments revealed the relationship between per unit volume dissipated energy with effective stress, relative density and shear strain. The dissipate energy per unit volume was much less affected by shear strain than effective stress and relative density. In other words, the dissipated energy is strongly dependent on relative density and effective stress. These results show that the dissipated energy per unit volume is very useful and may contain the non-uniform loading conditions of the earthquake spectrum. When multiple regression analysis is performed on experiment results, a relationship is proposed that gives liquefaction energy of sandy soils depending on relative density and effective stress parameters.

• 천문학회지
• /
• 제27권1호
• /
• pp.55-60
• /
• 1994

The 3mm transitions to CO, $^{13}CO,\;CS,\;HCO^+$, and HCN have been observed toward the compact HII regions in W58 using the 14m Daeduk Radio Telescope (DRT). Some of the observed lines show high-velocity wings resulted from outflowing materials of the compact HII regions. We derive the beam averaged column densities of the observed species and compare their relative abundances. The $HCO^+$ abundance appears to be smaller by about an order of magnitude than those of 'typical' quiet molecular clouds. CS may be a good reference molecule in comparing relative abundances in different physical conditions.

• Nuclear Engineering and Technology
• /
• 제29권5호
• /
• pp.375-384
• /
• 1997

Relative power density distributions of the Kori Unit 1 pressurized water reactor are calculated by Monte Carlo modeling with the MCNP code. The Kori Unit 1 core is modeled on a three-dimensional representation of the one-eighth of the reactor in-vessel component with reflective boundaries at 0 and 45 degrees. The axial core model is based on half core symmetry and is divided into four axial segments. Fission reaction density in each rod is calculated by following 100 cycles with 5,000 test neutrons in each cycle after starling with a localized neutron source and ten noncontributing settle cycles. Relative assembly power distributions are calculated from fission reaction densities of rods in assembly. After 100 cycle calculations, the system converges to a k value of 1.00039 $\geq$ 0.00084. Relative assembly power distribution is nearly the same with that of the Kori Unit 1 FSAR. Applicability of the full-scope Monte Carlo simulation in the power distribution calculation is examined by the relative root moan square error of 2.159%.

• Asian-Australasian Journal of Animal Sciences
• /
• 제29권4호
• /
• pp.549-554
• /
• 2016

The present study was conducted to investigate whether dietary essential oils could affect growth performance, relative organ weights, cecal microflora, immune responses and blood profiles of broiler chickens fed on diets containing different nutrient densities. A total of eight hundred-forty 1-d-old male broiler chicks were randomly allotted into twenty-eight pens (7 pens per treatment, 30 chicks per pen). There were four experimental diets containing two different nutrient densities and supplemented with or without essential oils. Experimental period lasted for 35 days. No clear interaction between nutrient density and essential oils on any of growth performance-related parameters was observed. Live body weights were affected (p<0.05) by nutrient density at 21 days and by dietary essential oils at 35 days. Essential oils significantly (p<0.05) increased daily body weight gain and feed conversion ratio during the periods of 22 to 35 and 1 to 35 days, but failed to affect feed intake during the entire experimental period. Daily weight gain at 1 to 21 days and feed intake at 1 to 21 and 1 to 35 days were significantly impaired (p<0.05) by nutrient density. There were significant treatment interactions (p<0.05) on relative weights of bursa of Fabricius and abdominal fat contents. Finally, either essential oil or nutrient density did not influence the relative percentages of breast and leg meats, the population of cecal microflora, blood parameters and antibody titers against Newcastle disease and infectious bronchitis in broiler chickens. It was concluded that dietary essential oils, independent to nutrient density, failed to stimulate feed intake, but increased growth performance in broiler chickens.

• The Korean Journal of Ceramics
• /
• 제4권3호
• /
• pp.213-221
• /
• 1998

$BaCe_{0.9}Gd_{0.1_O_{2.95}$ powder was synthesized by oxalate coprecipitation method. Precipitate with a stoichimetric ratio of the cations was prepared by adding a mixture of Ba, Ce and Gd nitrate solution to an oxalic acid solution at pH 4. Reaction between the constituent oxides to form a perovskite phase was initiated at $800^{\circ}C$ and a single phase $BaCe_{0.9}Gd_{0.1_O_{2.95}$ powder having good sinterability was obtained after calcination at $1000^{\circ}C$. Sintering green compacts of this powder for 6 h showed a considerable densification to start at $1100^{\circ}C$ and resulted in 93% and 97% relative densities at $1300^{\circ}$ and at $1450^{\circ}C$, respectively. Whereas the power compacts prepared by solid state reaction had lower relative densities, 78% at $1300^{\circ}$and 90% at $1450^{\circ}C$. Fine particles of $CeO_2$ second phase were observed in the surface of the sintered compacts. This was attributed to the evaporation of BaO from the surface that had been exposed during thermal etching.

• 한국세라믹학회지
• /
• 제33권10호
• /
• pp.1177-1185
• /
• 1996

Y-TZP/Ce-TZP ceramics having relative sintered densities of>95% average grain sizes of 0.36$\mu\textrm{m}$ microhar-dness of 1150 kg/mm2 fracture strength of 390-830 MPa and toughness of 6.4-10.2 MPa$.$mm1/2 were prepared by conventional sintering of 3 mol% Y2O3-ZrO2 and 12 mol% CeO2-ZrO2 powders at 1400 and 1500$^{\circ}C$ The average grain sizes of Y-TZP/Ce-TZP ceramics were mainly governed by those of Ce-TZP. White increasing Ce-TZP content toughness increased while microhardness and fracture strength decreased. With comparing microhardness and toughness fracture strength was more sensitive on not only grain size but also other factors such as microstructural and compositional variations. The densification of Y-TZP/Ce-TZP cermaics was not greatly affected by composition and soaking time at temperature over 1400$^{\circ}C$ With increasing CE-TZP content the stability of t-ZrO2 decreased under thermal aging in air whereas increased in hydrothermal atmosphere and aqueous solution.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.325-328
• /
• 1999

The physical and electrical properties of $\textrm{Ba}_1$ $_{x}\textrm{Sr}_{x}$($\textrm{Mg_{1/3}Nb_{2/3}}$)$\textrm{O}_3$ (x =0, 0.2, 0.4, 0.6, 0.8, 1.0) ceramics were investigated. The Bal $_{x}\textrm{Sr}_{x}$($\textrm{Mg_{1/3}Nb_{2/3}}$)$\textrm{O}_3$ systems were shown that the hexagonally ordered superlattices were increased with increasing x values. The relative densities of all samples were over 97% theoretical densities. The dc resistivities of samples were $10^{13}$ - $10^{14}$$\Omega\textrm{cm}$at room temperature, these values were nearly constant at 130(x=0)-$230^{\circ}C$ (x=l). However, the resistivities of samples decreased rapidly above those temperature and their activation energies were from 1.0 to 1.52 eV. The relative dielectric constant was 33(BMN) and 30.6(SMN) respectively. And the highest value was shown at x=0.4 and the value was 34.3. The temperature coefficient of dielectric constant was -61 ppm/$^{\circ}C$(BMN) and 79 ppm/$^{\circ}C$ (SMN) respectively.

• 치과방사선
• /
• 제17권1호
• /
• pp.197-207
• /
• 1987

This study was undertaken to investigate the relationships between film and processing solution at different processing temperatures. Three kinds of periapical film were used for this study. They included EP-2l film, DF-58, and A film Each film was processed by automatic film processor with RD-Ⅲ X-dol 90, and A processing solutions at 68° 74° 80° 86° and 92°F. Film density was measured with the densitometer, and base plus fog density, film relative speed, film contrast, and subject contrast were evaluated. The following results were obtained; 1. As the processing temperature was increased, base plus density was increased. Inadequate base plus fog densities were obtained with three films in combination with three processing solutions at 92°F. 2. Lowest base plus fog densities were obtained with A film, followed in ascending order by EP-21, and DF-58 film in combination with A or RD-Ⅲ processing solutions. The sequence of base plus fog densities was in ascending order by EP-21, A, and DF-58 film in combination with X-dol 90 processing solution. 3. The sequence of film relative speed values was in ascending order of EP-21, A, and DF-58 film in combination with A and RD-Ⅲ processing solutions, respectively. 4. As the processing temperature was increased, film contrast values was increased. The sequence of film contrast values was in descending order solution. The sequence of film contrast values was in descending order of EP-2l, DF-58, and A film in combination with RD-Ⅲ, X-dol 90 processing solution at 80°F. 5. As the processing temperature was increased, subject contrast was increased. The sequence of subject contrast was in descending order of A, X-dol 90, and RD-Ⅲ processing solution in combination with three films at 80°F. The sequence of subject contrast was in descending order of EP-21, A, and DF-58 film in combination with A processing solution at different processing temperatures.