• Communications of the Korean Mathematical Society
• /
• v.30 no.4
• /
• pp.481-491
• /
• 2015

We calculate volume ratio of a hypersurface orthogonal to a timelike geodesic relative to that of a hypersurface in the FLRW space-time.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.12 no.4
• /
• pp.226-231
• /
• 1992

This experiment was carried out to estimate the dry matter accumulation using growth analysis in spring growth of perennial ryegrass varieties grown under space planting conditions, based on the data of previous paper9'. The results obtained were as follows: 1. Growth parameters of leaf area ratio(LAR), specific leaf area(SLA) and leaf weight ratio(LWR) were recognized siginificant differences between varieties. But, specific leaf area(SLA), leaf weight ratio (LWR) and relative tiller appearance rate(RTAR) were recognized significant differences between growth stages. Specific leaf area(SLA) was significant difference for the interaction of variety Xgrowth stage. 2. The relative growth rate of biological yields(BYRGR) indicated significantly positive correlations with relative growth rate of shoot(RGR) and root(RWGR), and net assimilation rate(NAR) as affected by the varieties and growth stages. 3. The relative growth rate of biological yields(BYRGR) indicated significantly positive correlation with nct assimilation rate(NAR) in all varieties. Leaf area ratio(LAR) had significantly positive correlation with specific leaf area(SLA) in all varieties, but shows a significant negative correlation with leaf weight ratio(LWR) of Maprima variety. 4. The relative growth rate of biological yields(BYRGR) indicated significantly positive correlations with the absolute growth rates of yield components.

• Journal of the Korean Society of Safety
• /
• v.20 no.3 s.71
• /
• pp.152-157
• /
• 2005

This experimental study was devoted to investigate skin friction of H group piles with uplift loading conditions in granite soil under laboratory test. Model piles made of steel embedded in weathered granite soil were used in this study. Pile arrangements($2{\times}2,\;3{\times}3$), pile space(2D, 4D, 6D), and soil density($D_r=40%,\;80%$) were tested. The main results obtained from the model tests can be summarized as follows. The series of tests found that ultimate uplift load and displacement for group piles were increased as piles space ratio increases to $D_r=40%$ of soil density. In the relative density of $D_r=80%$, bearing capacity for group piles was greater than for single pile. In the relative density of $D_r=40%$, the theoretical value of skin friction for group piles was greater than practical value. In the relative density of $D_r=80%$, both theoretical and practical value of skin friction for group piles were increased as piles space ratio increases.

• Journal of Environmental Impact Assessment
• /
• v.31 no.6
• /
• pp.438-448
• /
• 2022

This study is to improve the quantitative estimation index of biotop area ratio, which is an environmental planning index and environmental ecological planning technique, as a planning means that can induce the improvement of ecological soundness in the spatial planning stage. It is intended to identify the relative importance of space types and calculation indicators currently in operation, and to find alternatives through opinion analysis on improvement of space types and weights. As the method of this study, AHP analysis was performed to evaluate the relative importance of spatial types for in-depth analysis of spatial types and calculation indicators. In order to secure the reliability and objectivity of the study, 50 experts participated. Through this study, it can be linked with the improvement of technologies and construction methods, maintenance efficiency, economic feasibility, and construction technology, which are developed through analysis on the limitations and improvements by type of biotop area ratio. And it is expected to contribute to the improvement of the urban environment and vitalization of the biotop area ratio through the application of the biotop area ratio.

• Journal of the Korean Statistical Society
• /
• v.27 no.3
• /
• pp.251-264
• /
• 1998

When the LRT is not feasible, we define quasi-LRT(QLRT) as a modification of the LRT Under some appropriate conditions the QLRT shares Bahadur optimality and Bartlett Adjustability with the LRT. When we can find maximum likelihood estimator under the null parameter space but not under the unrestricted parameter space, our QLRT is Bahadur optimal as is the LRT We suggest the stopping rule of the Newton-Raphson iterations for constructing the QLRT statistics which are Bartlett adjustable.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.11B no.2
• /
• pp.1-8
• /
• 2001

This paper deals with magnetic field analysis and computation of cogging torque using an analytical method in Interior Permanent Magnet Motor (IPMM). The magnetic field is analyzed by solving space harmonics field analysis due to magnetizing and the cogging torque is analyzed by combining field analysis with relative permeance. In reducing cogging torque, the inferences of various design variable and magnetizing distribution are investigated. It is shown that the slot and pole ratio (the pole-arc / pole-pitch ratio) combination has a significant effect on the cogging torque and presents a optimal flux barrier shape to reduce the cogging torque. The validity of the proposed technique is confirmed with 2-D Finite Element(FE) analysis.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.9
• /
• pp.871-876
• /
• 2011

In this paper, the equilibrium flight conditions of a Korean Traditional Bangpae Kite with low aspect ratio were analyzed by it's aerodynamic data of wind tunnel test. The data of aerodynamic forces and center of pressure of the Kite were used to calculate the relative length of bridles to satisfy the condition of settling the kite to the static equilibrium steady state between ${\theta}=30^{\circ}{\sim}60^{\circ}$. From this equilibrium flight performance analysis, we obtained ($0.88{\pm}0.02$)c of the rear bridle length corresponding to 0.88c of fixed front bridle length. These results were exact agreement with the relative bridle lengths by Korean classical method.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.1458-1465
• /
• 2010

A lot of dredging and reclaming projects are recently under way in Korea for the efficient use of limiting land space. Saemanguem area is special case of reclaiming by dredged soil. In case of a confined disposal of dredged soils by a pump dredger, generally coarse grained soils are separated from fines with dropping at the near part of the pump dredger. This kind of seperation of fine contents could be a factor of liquefaction by earthquake. In Korea, recently, earthquakes with magnitude of 3.0 or higher are distinctively increasing in 1990. In this study, cyclic shear characterics of Saemanguem Dredged sand depending on fine content were analyzed. A series of undrained cyclic triaxial test with cyclic stress ratio ($\sigma_d/{2\sigma_{{\upsilon}c}}'$) were performed on both isotropic consolidated specimen and sand with fine contents of 0%, 5%, 15%, 30%, 40% under the effective vertical stress of 100kPa and 50% and 60%, 70% of relative density for fine content of 0%, respectively. In the test results, cyclic shear strength increased by increasing of cyclic stress ratio($\sigma_d/{2\sigma_{{\upsilon}c}}'$) with increasing the relative density at the same number of cyclic under the effective confining pressure of 100kPa. It is almost highest the double amplitude(DA) 1%, 3%, 5%, 7.5% and 10% at fine content of 15% between Cyclic stress ratio($\sigma_d/{2\sigma_{{\upsilon}c}}'$) value at cyclic number five and fine content. Number of cyclic is 30 under the effective vertical stress of 100kPa, 70% of relative density for fine content of 15%. when the cyclic stress ratio at each relative density was compared at cyclic number five, the double amplitude(DA) 1%, 3%, 5%, 7.5% and 10%, and the pore-pressure ratio (${\Delta}u/{\sigma'}_c$) 0.95 value were compared; under the relative density of 70% and the effective confining pressure of 100kPa. The pore-pressure ratio (${\Delta}u/{\sigma'}_c$) 0.95 value showed a similar trend to the double amplitude (DA) 5% line.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.3
• /
• pp.161-167
• /
• 2012

It is known that big brown bats can distinguish echo of a prey at various angles. In this paper, we suggest a new object localization strategy using ultrasonic echolocation. We calculate the relative energy ratio between a high frequency component of ultrasound signal and a low frequency component of ultrasound signal for a target object. We found the measure depends on bearing angle of the object in space. We also tested energy ratio of echoed FM ultrasound signals depending on frequency, based on cross-correlation. It can determine the relative angular position of objects even though the reflected signals are congested form each object.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.4
• /
• pp.82-91
• /
• 2003

Experiments to investigate the mixing performance of unlike doublet impinging jets are conducted. Reynolds number of simulants used in this study rages from 1.0 to 1.5 Cold flow test is performed to investigate the hydrodynamic effect and spray of the impinging jets are collected locally and calculated by using Rupe's mixing efficiency equation. Momentum exchanges and relative velocity ratio between two jets are taken as the main parameter to represent the effect of enlargement of the orifice diameter. As diameter ratio increases, the corresponding momentum ratio where maximum mixing efficiency occurs and relative velocity at the maximum mixing efficiency ranges 0.6 to 0.7, respectively. Penetration depth can be taken as a prominent parameter to estimate the mixing efficiency.