• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2010년 춘계학술발표회 논문집
• /
• pp.129-131
• /
• 2010

본 연구에서는 고해상도의 비측정용 디지털 카메라를 이용하여 강구조 철도교량의 3차원 변형량을 측정하고자 하였다. 변형량 측정은 현장관측 시간을 단축하고, 작업의 효율을 높이기 위해 공면조건에 의한 상호표정 방법(기준 타겟점의 3차원 측량이 필요 없다)을 적용하고자 한다. 이 방법으로 측정한 변형량을 토털스테이션을 이용하여 기준점의 3차원 측량으로 구한 외부표정요소로부터 획득한 변형량과 비교하여, 적용방법의 정확도를 확인하고자 한다.

• 한국세라믹학회지
• /
• 제32권8호
• /
• pp.950-956
• /
• 1995

Y2O3 thin films were deposited by reactive sputtering of Y target in Ar and O2 gas mixture. Residual stress was measrued by sin2$\psi$ method of x-ray diffraction (XRD) and growth orientation was examined by measuring the relative intensity of (400) plane and (222) plane of Y2O3 films. In the case that Y2O3 films were deposited at 40$0^{\circ}C$ and at low working pressure below 0.05 torr the film had large compressive stress and (111) plane orientation. At working pressure of about 0.10 torr the film had small compressive stress and (100) orientation. Above working pressure of 0.20 torr, the films had nearly zero stress and random orientation. In the case that the (111) oriented film deposited at low working pressure below 0.05 torr, as substrate temperature decreased, (111) orientation increased. In the case the film, with (100) orientation, deposited at working pressure of about 0.10 torr, (100) orientation increased with decresing substrate temperature. These relationship of residual stress and growth orientation can be explained by the relationship of surface energy and strain energy.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.1042-1046
• /
• 1993

This paper describes a control scheme for a robot manipulator system which uses visual information to position and orientate the end-effector. In this scheme, the position and orientation of the target workpiece with respect to the base frame of the robot are assumed to be unknown, but the desired relative position and orientation of the end-effector to the target workpiece are given in advance. The control scheme directly integrates visual data into the servoing process without subdividing the process into determination of the position and orientation of the workpiece and inverse kinematics calculation. A neural network system is used for determining the change in joint angles required in order to achieve the desired position and orientation. The proposed system can be control the robot so that it approach the desired position and orientation from arbitrary initial ones. Simulation for the robot manipulator with six degrees of freedom will be done. The validity and the effectiveness of the proposed control scheme will be verified by computer simulations.

• Spatial Information Research
• /
• 제13권2호
• /
• pp.129-138
• /
• 2005

본 논문에서는 스테레오 CCD 카메라를 이용하여 이동체의 3차원 위치좌표를 추출하는 알고리즘을 제안하였다. 이 알고리즘을 통해 효율적으로 이동체의 3차원 위치좌표를 추출하는 방법을 도출하고자 하였다 스테레오 CCD 카메라의 상호표정을 수행하고, 획득된 영상에서 이동체를 배경과 분리한 뒤, 좌$\cdot$우 영상에서 이동체의 영상좌표를 추출한다. 추출된 좌$\cdot$우 영상에서의 영상좌표를 이용하여 이동체의 3차원 위치를 결정하게 된다. 스테레오 CCD 카메라간의 상호 위치 및 자세를 결정하기 위한 표정 모듈은 독립적 상호표정(independent relative orientation)을 사용하였고, 획득된 영상에서 이동체 추출 알고리즘은 칼라영상의 RGB(Red, Green, Blue) 화소값을 이용하여 구현하였다. 좌$\cdot$우 CCD 카메라로부터 들어오는 영상좌표를 이용하여 공간전방교회 법을 통해 이동체의 위치를 계산하였다. 그리고 전체 시스템의 실험을 수행하였고, 그 결과의 정확도를 비교하였다.

• 한국의류학회지
• /
• 제37권3호
• /
• pp.260-269
• /
• 2013

This study verifies the direct and indirect causal relationship of sociocultural values related to appearance effect appearance evaluation, body area satisfaction, appearance orientation, and self-esteem that are variables involved in body images. This paper is expected to empirically support the information regarding the path and the relative influence among related-variables and their relational structures. A survey was conducted on 230 women from the ages of 20 to 29 who live in Daegu and Gyeongbuk areas. The data analysis was performed through programs such as AMOS 19.0 and SPSS 19.0 for Windows. The findings are as follows: First, Sociocultural values relating to appearance affect directly body image - appearance evaluation, body area satisfaction, and appearance orientation. Appearance evaluation and appearance orientation were influenced positively; however, body area satisfaction received egative effects. In addition, sociocultural values related to appearance exert relatively stronger influence on appearance orientation. Second, among body images, appearance evaluation and body area satisfaction directly effect self-esteem; however, appearance orientation did not show any direct influence. Appearance evaluation influenced relatively higher on self-esteem. Third, it appeared that appearance evaluation directly affected Appearance orientation. Forth, sociocultural values related to appearance affect self-esteem through body images-appearance evaluation, body area satisfaction, and appearance orientation - as mediators. This confirmed the mediator role of body image between sociocultural values related to appearance and self-esteem.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.591-596
• /
• 2002

Fused deposition(FD) modeling by Stratasys Inc., is one of the material deposition subfamilies of solid freefrom fabrication(SFF) technologies. In this process, build material in the form of a flexible filament, is heated to a semi-liquid state and extruded from a controlled deposition head onto a fixtureless table in a temperature controlled environment. The position of nozzle is computer controlled relative to the base, which allows geometric complex models to be made to precise dimensions. FDM provide what the part was directly tested by the worker. It provide believable data. This Study is identify to surface roughness by build orientation adjustment. So, the paper is the study on surface roughness by build orientation at FDM.

• 대한공간정보학회지
• /
• 제11권3호
• /
• pp.3-11
• /
• 2003

본 연구는 측량용 디지털 카메라인 Rollei d7 metric과 d7 $metric^{5}$를 이용하여 촬영거리, 수렴각, 촬영방향을 변화시켜가면서 촬영을 실시하였으며, 표정 시 발생하는 오차를 최소화하기 위해 프로그램 상에서 자동적으로 상호표정 되는 원형표지를 이용하였다. 그리고 자료처리체계로는 해석적 방법 중에서 현재 가장 좋은 정도를 얻을 수 있는 광속조정법(bundle adjustment)를 이용하였다. 이러한 연구는 차후 현장에서 요구하는 정도의 사진촬영과 예상되는 정도를 판단하는데 중요한 자료로 이용될 것으로 판단된다.

• 지질공학
• /
• 제6권3호
• /
• pp.131-136
• /
• 1996

세립화강암 시료에 개별 보정된 6개의 탐촉자를 부착하고 연필심 파괴로 급재하하여 AE/MA파를 발신 시키면서 고주파인 AE/MA파의 감쇄특성을 연구하였다. AE/MA파의 강도는 거리뿐만 아니라 발신원과 수신점의 상대적인 방위에 의하여 결정되며 Charcoal 세립화강암의 감쇄상수는 1.058이다. 이 상수는 AE/MA파으 주어진 경로에 대하여서 발신원과 수신점의 상대적인 방위에 무관하게 적용 가능한 것으로 평가된다.

• 한국정밀공학회지
• /
• 제13권8호
• /
• pp.175-183
• /
• 1996

This paper presents three-dimensional robot task using the vision control method. A minimum of two cameras is required to place points on end dffectors of n degree-of-freedom manipulators relative to other bodies. This is accomplished using a sequential estimation scheme that permits placement of these points in each of the two-dimensional image planes of monitoring cameras. Estimation model is developed based on a model that generalizes known three-axis manipulator kinematics to accommodate unknown relative camera position and orientation, etc. This model uses six uncertainty-of-view parameters estimated by the iteration method.

• Structural Engineering and Mechanics
• /
• 제87권6호
• /
• pp.529-540
• /
• 2023

A novel laminated-hybrid-composite-beam (LHCB) of glass-epoxy infused with flyash and graphene is constructed for this study. The conventional mixture-rule and constitutive-relationship are modified to incorporate filler and lamina orientation. Eringen's non-local-theory is used to include the filler effect. Hamilton's principle based on fifth-order-layer-wise-shear-deformation-theory is applied to formulate the equation of motion. The analogous shear-spring-models for LHCB with multiple-cracks are employed in finite-element-analysis (FEA). Modal-experimentations are conducted (B&K-analyser) and the findings are compared with theoretical and FEA results. In terms of dimensionless relative-natural-frequencies (RNF), the dynamic-response in cantilevered support is investigated for various relative-crack-severities (RCSs) and relative-crack-positions (RCPs). The increase of RCS increases local-flexibility in LHCB thus reductions in RNFs are observed. RCP is found to play an important role, cracks present near the end-support cause an abrupt drop in RNFs. Further, multiple cracks are observed to enhance the nonlinearity of LHCB strength. Introduction of the first to third crack in an intact LHCB results drop of RNFs by 8%, 10%, and 11.5% correspondingly. Also, it is demonstrated that the RNF varies because of the lamina-orientation, and filler addition. For 0° lamina-orientation the RNF is maximum. Similarly, it is studied that the addition of graphene reduces weight and increases the stiffness of LHCB in contrast to the addition of flyash. Additionally, the response of LHCB to moving mass is accessed by appropriately modifying the numerical programs, and it is noted that the successive introduction of the first to ninth crack results in an approximately 40% to 120% increase in the dynamic-amplitude-ratio.