• Speech Sciences
• /
• v.13 no.3
• /
• pp.83-95
• /
• 2006

This study attempts to suggest a criterion of Korean language development. For this purpose we investigated speaking rates of the spontaneous utterances produced by 144 children, aged 3 to 8. We analyzed each subject's speaking rate and its relevance with speaker's age, gender and utterance length. To determine the relative contributions of variables to the speaking rate, multiple regression was conducted. Results of this study can be summarized as follows: (1) The mean and maximum values of the speaking rate increased with the growth of age. (2) A statistically significant increase in speaking rate appeared at two-year intervals. (3) There was no significant difference between male and female groups in the speaking rate. (4) The multiple regression analysis has shown that along with the speaker's age, the utterance length(the mean number of syllables per utterance) is also important in estimating the speaking rates.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.243-246
• /
• 2006

This study investigates the improvement in the theoretical success rate of the integer ambiguity resolution in GPS/GNSS carrier-phase positioning by using many visible satellites. It estimates the dependence of the rate on the baseline length in relative positioning under the condition of the use of double/triple-frequency navigation signals. The calculation results show that the use of 14 navigation satellites (i.e., seven GPS and seven Galileo ones) remarkably improves the success rate under the condition of very short baseline length, compared with the use of seven GPS ones. The numerical reliability of the calculated success rates is strictly tested by examining the tightness of the union and minimum-distance bounds to the rate. These bounds are also shown to be effective to investigate the realization of the high success rates.

• Tunnel and Underground Space
• /
• v.8 no.4
• /
• pp.351-358
• /
• 1998

A statistical method for assessing the joint persistence based on the in-situ measurement of joint trace length has been derived. This method utilizes the probability density distribution of either the joint trace length or the diameter of hypothetically circular joint diameter depending on the relative size of joint surface to that of the potential keyblock. The stability of potential keyblock with different sizes and joint persistences has been also calculated to illustrate the applicability of the developed method to the design and the safe excavation of large scale underground openings.

• Computers and Concrete
• /
• v.2 no.5
• /
• pp.367-380
• /
• 2005

Recent earthquakes have shown that many of existing buildings in Iran sustain heavy damage due to defective seismic details. To assess vulnerability of one common type of buildings, which consists of low rise framed concrete structures, three defective and three standard columns have been tested under reversed cyclic load. The substandard specimens suffered in average 37% loss of strength and 45% loss of energy dissipation capacity relative to standard specimens, and this was mainly due to less lateral and longitudinal reinforcement and insufficient sectional dimensions. A relationship has been developed to introduce variation of plastic length under increasing displacement amplitude. At ultimate state, the length of plastic hinge is almost equal to full depth of section. Using calibrated hysteresis models, the response of different specimens under two earthquakes has been analyzed. The analysis indicated that the ratio between displacement demand and capacity of standard specimens is about unity and that of deficient ones is about 1.7.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.4 no.1
• /
• pp.7-16
• /
• 1971

This paper deals with the numbers of vertebrae, gill rakers and relative growth of the Pacific saury, Cololabis saira along the eastern coast of Korea in May, July and December 1970. About 90 percent of the total fish population possessed 64-66 vertebrae with the mean of 64.80 and the mode of 65. The number of gill rakers varied from 33 to 44 in December with the mean of 37.08. With regard to the number of vertebrae and gill rakers of the medium (26.0-28.0 cm in fork length) and large (30.0-31.0 cm in fork length) sized groups, there are similarities between the northbound modium sized group and the southbound large sized one, and also between the southbound medium and southbound large sized groups. Although no correlation was found between the numbers of vertebrae and gill rakers, in December the number of vertebrae of the large sized group exceeded that of the medium sized group, and on the other hand the number of gill rakers of the large sized group was fewer than that of the meduim sized one. There was a tendency of decreasing in ratio of the head length to the fork length as the latter increased, The relationships between the fork length and the head length varied depending on the northbound and southbound migration of the fish. The same tendency was also seen in the relationship between the fork length and the body weight. The body weight increased from July to December (from medium to largo sized group) showed more than twice than that from December to the following July (from medium to large sized group). The coefficient of fatness remained constant in December, but a distinct variation was found between the medium and large sized groups in July, corresponding to the spawning sea-son of the fish. Relatively higher coefficient was found in December as compared to that found in July.

• Korean Journal of Food Science and Technology
• /
• v.32 no.4
• /
• pp.747-754
• /
• 2000

DNA damages in post-mortem bovine muscle samples caused by gamma irradiation at doses of 1 to 10 kGy were determined by Comet assay. When the cell extract was prepared in a physical method and followed by neutral lysis and neutral electrophoresis, the optimal comet images could be obtained. DNA damages were evaluated from the mean tail length, the distributions of comet images in 4 groups divided by tail length and the relative damage index (RDI) values calculated from the distribution pattern. The mean tail length and RDI value were increased by increasing the irradiation dose, and the RDI value was found to be useful as an index for discriminating of irradiation and measuring the irradiated dose. Blind tests using Korean domestic (Hanwoo) and imported beef samples showed a higher RDI value for the latter. However, the value was lower than those of irradiated samples indicating that the cause of DNA damages in the imported beef samples might be not irradiation but low-temperature treatments. It was concluded from the results of this study that the irradiated beef and its irradiated dose could be detected and predicted by Comet assay.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1998.04a
• /
• pp.141-148
• /
• 1998

The chloride attack of the top mat of reinforcing bars is a major cause of deterioration of comcrete deck of plate girder bridges. This is caused by a current design method which requires a top mat of reinforcing bars to resist a negative bending moment in bridge decks. In recently, empirical evidence has indicated that the top transverse reinforcing bars can patially or fully be eliminated without jeopardizing the structural integrity of a deck. So, one of the most efficient way to increase durability of concrete deck of bridges is the development of new design method that reduce or eliminate the top mat reinforcing bars, mad it is possible by the exact analysis that considering the negative bending moment reducing effect which introduced by relative deflection of plate girders. In this study, we develop the new bridge deck analysis method that considered the effect of relative girder deflection by applying the principles of slope deflection method of frames, and that is fine tuned with results of finite element analysis. This new approach evaluate a bending moment in a deck based on the effect of relative girder deflection as well as the magnitude of wheel loads, the girder spacing and stiffness, deck stiffness and the span length

• Korean Journal of Ichthyology
• /
• v.21 no.4
• /
• pp.239-246
• /
• 2009

To establish a database for artificial seed production of stone flounder Kareius bicoloratus, experiments were conducted to study the characteristics of spawning and fecundity of this species. Broodstocks were captured in the area of Gyeokryeolbiyeoldo, Chungnam, Korea in October 2003 and induced to natural spawning. The broodstock consisted of 12 females (34.5~51.0 cm total length and 540~2,200 g body weight) and 23 males (29.0~38.0 cm total length and 310~680 g body weight). Gonad development began in December and proceeded in the direction of the tail; measurements were made with the naked eye. The tank-held broodstock were reared for 3 months before spawning, which continued for 77 days from January 9 to March 27, 2004. Daylength during the spawning was recorded at the yearly shortest of 9.8~12.1 hours and the water temperature was maintained at $8.4{\sim}12.2^{\circ}C$. The total fecundity was 19,844,000 individuals, among which 15,433,000 individuals (77.8%) were produced during the mid-spawning period. The average bloating rate, egg-fertilization rate and hatching rate of the total number spawned reached 50.4%, 58.5% and 55.6%, respectively, and 93.8% of the hatched fry appeared normal. The number of total eggs in absolute fecundity per total length was proportional to both lengths, as was the number of total eggs in relative fecundity per total length. The number of total eggs in absolute fecundity per body weight was proportional to body weight as was the number in relative fecundity per body weight except that the number in relative fecundity per gram decreased after a peak in increased body weight at a certain point.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.4
• /
• pp.27-36
• /
• 2007

The purpose of this study was to investigate the effect of the upper body in order to increase a propulsive force in the old's walking. The subjects were each 10 males, the latter term of the aged and former term of the aged. There were three walking speeds of slow(about 5km/h), medium(about 6km/h), and maximum speed(about 7km/h). The subjects walking 11m were filmed the 5m section (from 3m to 8m) by 2-video cameras using three dimensional cinematography. And we computed different mechanical quantities and especially computed the relative momentum in order to achieve this study's aim. In this study, we was able to acquire some knowledge. The step length and step frequency increased in proportion to the walking speed, and the faster walking speed, the shorter ratio of supporting time( both legs supporting time/one step length time). When it was one leg support phase, the torso was indicated to generate the momentum in order to produce the propulsive force of walking. The upper and lower body had a cooperative relation for walking such as keeping step rate with the arms to legs and maintaining the body balance. The opposition phase for upward-and-downward direction of the torso and arms in walking was functioned to prevent the increase rapidly toward vertical direction of the center of gravity. The arms had contributed to coordinate the tempo of legs and the posture maintenance of the upper body. And by absorbing the relative momentum from the upper torso with arms to the lower torso, it had the rhythmical movement on upward-and-downward direction reducing the vertical reaction force. On account of the relations of absorption and generation of the propulsive force and the production of vertical impulse in the lower torso when walking by maximum speed, it was showed that the function of lower torso was come up as important problem for the mechanical posture stability and propulsive force coordination.

• The korean journal of orthodontics
• /
• v.44 no.4
• /
• pp.184-194
• /
• 2014

Objective: To evaluate the relative importance of bilabial prominence in relation to other facial profile parameters in a normal population. Methods: Profile stimulus images of 38 individuals (28 female and 10 male; ages 19-25 years) were shown to an unrelated group of first-year students (n = 42; ages 18-24 years). The images were individually viewed on a 17-inch monitor. The observers received standardized instructions before viewing. A six-question questionnaire was completed using a Likert-type scale. The responses were analyzed by ordered logistic regression to identify associations between profile characteristics and observer preferences. The Bayesian Information Criterion was used to select variables that explained observer preferences most accurately. Results: Nasal, bilabial, and chin prominences; the nasofrontal angle; and lip curls had the greatest effect on overall profile attractiveness perceptions. The lip-chin-throat angle and upper lip curl had the greatest effect on forehead prominence perceptions. The bilabial prominence, nasolabial angle (particularly the lower component), and mentolabial angle had the greatest effect on nasal prominence perceptions. The bilabial prominence, nasolabial angle, chin prominence, and submental length had the greatest effect on lip prominence perceptions. The bilabial prominence, nasolabial angle, mentolabial angle, and submental length had the greatest effect on chin prominence perceptions. Conclusions: More prominent lips, within normal limits, may be considered more attractive in the profile view. Profile parameters have a greater influence on their neighboring aesthetic units but indirectly influence related profile parameters, endorsing the importance of achieving an aesthetic balance between relative prominences of all aesthetic units of the facial profile.