• Analytical Science and Technology
• /
• v.25 no.3
• /
• pp.164-170
• /
• 2012

Cyanoacrylate fuming mehod is effective for latent fingerprints developing on non-porous surfaces. In this study, we investigated optimal conditions for latent fingerprint development using cyanoacrylate fuming method in vacuum chamber. The effects of temperature, relative humidity, fuming method and processing time were checked throughly. The amount of evaporated cyanoacrylate was increased at higher temperature, but cyanoacrylate polymerization on the fingerprint ridge was best at $30^{\circ}C$. With a relative humidity of 40% to 50% conditions, good quality of fingerprints were developed. If a relative humidity is lower than 30% or higher than 60%, polymerization rate of cyanoacrylate monomers on the fingerprint ridge was decreased. It was identified that application of $OMEGA-PRINT^{TM}$ dispersal pad or cotton ball with sodium hydroxide fuming method in vacuum chamber was more effective than natural fuming method. We found that cyanoacrylate processing time in vacuum chamber did not have more significant than relative humidity.

• Journal of Conservation Science
• /
• v.36 no.4
• /
• pp.255-263
• /
• 2020

Paulownia coreana has various advantages as a convenient workability, aesthetic outlook, beautiful patterns, low weight and high strength, and its permeability. P. coreana has been widely used for storage but there are no empirical researches proving its functionality in a field of conservation science until now. In this study, the seasonal and daily temperature and relative humidity control, and microbe and insect repellent activity were evaluated under the controlled and uncontrolled circumstances from 2015 to 2016. The results showed to be mainly excellent in relative humidity control and the buffering effect was good to adjust the average daily relative humidity range from the outside. With respect to the antimicrobial properties of P. coreana, we observed that its water-soluble extract produced visible zones of inhibition against five bacteria. However, it was difficult to predict the antimicrobial and/or insecticidal properties.

• Journal of Biosystems Engineering
• /
• v.26 no.4
• /
• pp.379-384
• /
• 2001

To enhance the smooth graft-taking of grafted seedlings, the excessive evapotranspiration from grafted seedlings just after grafting should be avoided. A measurement system of the evapotranspiration rate of grafted seedling under artificial lighting was set up to investigate the effect of physical environment on the evapotranspiration and graft-taking characteristics of grafted seedlings quantitatively. The evapotranspiration rate of grafted seedlings affected by relative humidity and light intensity were analyzed using the measurement system. The hypocotyl of watermelons (Citrullus vulgaris cv. Sweetdew, Hungnong Seed Co.) was slantly cut and then inserted into a hole on the stem of rootstock (Lagenaria siceraria cv. FR-King, Hungnong Seed Co.). Grafted seedlings were healed and joined for 5 days under cool-white fluorescent lamps (FL20SEX-d/18, Keumho Electric Co.) with photoperiod of 12h$.$d$\^$-1/ except dark period for one day after grafting in a closed graft-taking enhancement system developed by Kim(2000). The evapotranspiration rate and graft-taking of grafted seedling at air temperature of 23$\^{C}$ and air current speed of 0.1m$.$s$\^$-1/ was highly affected by relative humidity. But light intensity showed higher effect on the stem length of scion than relative humidity. In conclusion, it was suggested that relative humidity should be controlled at higher than 90% with photosynthetic photon flux of 50$\mu$mol$.$m$^2$$.$s$\^$-1/ to increase the survival of grafted seedlings and to produce healthy seedlings.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.6
• /
• pp.184-194
• /
• 2011

This study is to analyze the internal temperature and relative humidity of concrete at early age, as well as the mechanical behavior. Three different levels of cement unit content were cosidered as an experimental variable. In order to measure internal temperature and relative humidity immediately after concrete placement, this study developed a unique measuring device, which provided reliable results. Different cement content did not significantly affected the strengths including compressive, tensile and flexural strength and after 7 days of curing, strengths did not increase noticeably. Internal temperature reached the maximum about 11 hours later the placement and decreased after removal of forms. The internal temperature varied depending on the location and the exposure condition. In addition, the internal relative humidity was more affected by the exposure condition rather than the cement content.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.1
• /
• pp.93-99
• /
• 1996

The formation properties and oxidation mechanism of electrochemically oxidized porous silicon(OPS) films have been studied. To examine the humidity-sensitive properties of OPS films, surface-type and bulk-type humidity sensors were fabricated. The oxidized thickness of porous silicon layer(PSL) increases with the charge supplied during electrochemical humidity sensor shows high sensitivity at high relative humidity in low temperature. The sensitivity and linearity can be improved by optimizing a porosity of PSL. (author). refs., figs.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.35 no.2
• /
• pp.33-38
• /
• 2003

In order to design the high strength corrugated fiberboard containers for agricultural products that can be used for the cold chain system, a large number of individual boxes were placed in various humidity environments at two different temperature of 5 and $20^{\circ}C$. The results indicated that temperature changes do not effect on physical strength of corrugated fiberboard containers as much as humidity changes did. The main conclusion from this study was that compression strength of corrugated fiberboard containers dropped significantly at high humidity condition, but the rates varied depending on the number of walls, temperature, and perimeter of containers. The packaging designer must consider the corrugated fiberboard boxes are also greatly affected by dimensional variations such as the length versus width ratio. Based on this study, water-resistant board would not be necessary if the ambient relative humidity does not reach to a critical point, 85 percent in the cold chain system. However, the designer must count for the unexpected fluctuation of rotative humidity resulting in severe loss of the compression strength of corrugated fiberboard container.

• Journal of Sensor Science and Technology
• /
• v.21 no.2
• /
• pp.83-89
• /
• 2012

A simple array of metal-insulator-metal capacitive elements was proposed for a potential application in humidity sensing platforms. We fabricated meso-scale sensors with different sizes(large-size: $2.7{\times}2.7mm^2$ ; mid-size: $1.5{\times}1.5mm^2$ ; small-size: $0.7{\times}0.7mm^2$) and characterized the performance of each design. Polyimide films were utilized as a humidity-sensitive layer. Capacitance changes of the polyimide layer were measured with respect to water absorption. The device showed sensitivity in the full range of relative humidity (RH) with excellent linearity(correlation coefficient > 0.994). This array structure exhibits unique advantages including easy fabrication process, high batch productivity, and high structural compatibility with various substrate materials. It is anticipated that this device structure will be potentially useful in unique applications including mapping spatial humidity variations over a meso-scale area and implementing flexible humidity sensing element arrays.

• Journal of Bio-Environment Control
• /
• v.9 no.2
• /
• pp.115-119
• /
• 2000

Oak mushroom(Lentinus edoes(Berk) Sing) is one of the most important edible mushrooms, and its production has been rapidly increased due to nutritional and medicinal effects. In this study, climatic factors during the growing period of high-quality oak mushroom were analyzed and environmental factors affecting the quality of oak mushroom were discussed. Three places(Changheung, Puyo and Wonj) as mass producing areas of high-quality oak mushrooms and the 15 days of the growing period in 1997-1998 were selected. Major climatic factors for analysis were average air temperature, average relative humidity, ranges of daily air temperature, relative humidity, and wind speed. During the period, th daily average air temperature was $7~20^{\circ}C$ with the diurnal air temperature($7~20^{\circ}C$) and nocturnal air temperature($0~-2^{\circ}C$). The relative humidity ranged between 50 and 70% with the range of daily relative humidity(40~60%). Wind velocity was 1~4m.$s^{-1}$, From the results, it is concluded that the growing environmental conditions for high-quality oak mushroom differed from the optimum conditions for the high productivity of oak mushroom; environmental conditions such as wide ranges of air temperature and relative humidity, low humidity and wind speed might affect the emergence of high-quality oak mushroom.

• Food Science and Preservation
• /
• v.4 no.3
• /
• pp.271-278
• /
• 1997

Drying of Shiitake mushroom was investigated to see the effect of temperature, relative humidity of drying air and diameter of the pileus on its rates. The drying rate was increased with the increase of the air temperature and the decrease of the relative humidity. The external color was dark brown at higher drying temperature and higher relative humidity. Exponential and Thompson nodel were found to describe well the raying process of the Shiitake mushroom.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.71-72
• /
• 2012

The purpose of this study is to evaluate the depth of carbonation considering the relative humidity in concrete using the FEM model. The difference of relative humidity in concrete has not been considered in calculating the carbonation depth in analytic model. That reason can make the over estimation in expectation of RC structure durability. The temperature and R.H. expectation model and the carbonation depth expectation model are development in past author's studies. The two models are coupled in this study. The fact that there is the difference between actual environment and acceleration test is revealed from FEM numerical analysis.