• 펄프종이기술
• /
• 제34권1호
• /
• pp.46-53
• /
• 2002

This study was carried out to analyze the effects of preservation temperature and relative humidity to the physical properties of corrugated fiberboard boxes for fruit and vegetable packaging. The preservation temperature did not affect severely to physical properties of corrugated fiber-board. Relative humidity was a major cause of corrugated fiberboard box quality deterioration. The burst and compressive strengths of experimental boxes measured with Mullen high pressure tester and tong crush tester were decreased gradually as relative humidity increased from 55% to 75%. But, the strength properties slightly decreased relative humidity at 75% or higher. This tendency was the greater for single wall (SW) corrugated fiberboard box than that for double wall (DW). It is suggested that development of the water-resistant corrugated fiberboard and box be needed that can be used under the condition of low temperature and high moisture content, which are being employed in the cold chain system.

• 한국세라믹학회지
• /
• 제48권4호
• /
• pp.293-297
• /
• 2011

The thermodynamic behavior of phenolic resin was investigated to verify the relation between the properties of porous ceramics with $ZrO_2$-C system for submerged entry nozzle and the characteristics of phenolic resin with various relative humidity. The green and the sintered density were decreased between 25% and 50% relative humidity, whereas they were gradually enhanced above 50% relative humidity. The highest value of apparent porosity was 20.1% and the minimum compressive strength was 69MPa in the specimen using the powder exposed to 50% relative humidity. As a result of thermal analysis for phenolic resin, the shift of endothermic peak to low temperature and the reduction of exothermic peak were observed, and the peaks corresponded to melting and curing of phenolic resin, respectively. The melting and the curing of phenolic resin generate the change of green density, and it can affect the properties of submerged entry nozzle.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제17권2호
• /
• pp.173-180
• /
• 2008

The influence of temperature and relative humidity in infection and cross-infection of Nosema bombycis and N. mylitta respectively in mulberry silkworm, Bombyx mori L. on larval mortality, multiplication of pathogens, larval weight and growth rate in three different seasons were studied. Seasons were selected in such condition, when very less fluctuations between minimum and maximum temperature and minimum and maximum relative humidity ($25{\sim}28^{\circ}C$ and $65{\sim}72%$ R.H) was observed i.e., season-1. Fluctuations between minimum and maximum temperature were less ($28.05{\sim}34.50^{\circ}C$) but R.H % was more ($55{\sim}81%$) in season-2. Fluctuations between minimum and maximum temperature and R.H % were more ($20.00{\sim}40.5^{\circ}C$ and $64.00{\sim}90.00%$) in season-3. Growth rate of microsporidian-infected silkworm is directly related to the prevailing temperature and relative humidity in silkworm. Silkworm can tolerate slight variation of temperature but slight variation of relative humidity disfavours the development of silkworm and favours the multiplication of pathogens.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3423-3428
• /
• 2007

This paper shows that inlet humidity condition at cathode side is one of dominant parameters affecting the performance of PEMFC. To investigate effects of inlet humidity condition, the performance measurements were conducted for a single PEMFC with two operating variables : cathode relative humidity and dry condition in anode dry. The fuel cell employed for the experiments is a unit PEMFC with a 25$Cm^2$, Nafion$^(R)$112 membrane. As a result of this study, the cell performance is getting higher by increasing inlet humidity condition at cathode side. The cell performance is different from each operating temperature an it has maximum30% higher than dry condition at 60$^{\circ}C$ operating temperature with 80% relative humidity.

• 생물환경조절학회지
• /
• 제22권2호
• /
• pp.146-153
• /
• 2013

토마토 접목순화장치 개발을 위한 기초실험의 일환으로 대목의 종류 및 활착실내의 온습도가 접목활착율에 미치는 영향을 조사하였다. 접목활착실의 온도는 $23^{\circ}C>17^{\circ}C>20^{\circ}C>26^{\circ}C$ 순으로 초기 활착율과 최종활착율이 높은 것으로 조사 되었으며, 상대습도는 높을수록 활착율은 양호한 결과를 나타냈다. 단 상대습도가 90% 이상 처리구에서는 곰팡이병에 의한 이병주 발생도 같이 증가하는 경향을 나타냈다. 대목의 종류에 따른 초기활착율은 'Kanbarune'의 $26({\pm}1)^{\circ}C$와 'Solution'의 $20({\pm}1)^{\circ}C$를 제외하고는 대목의 종류와 관계없이 모든 온도 처리구에서 83% 이상 양호한 활착율을 보였으나, 최종 활착율에서는 처리 온도간에 뚜렷한 유의적 차이를 나타내, $23({\pm}1)^{\circ}C$에서만 대목의 종류와 관계없이 85%에서 90%전후의 활착율을 보였고, $20({\pm}1)$와 $26({\pm}1)^{\circ}C$에서는 65~75% 정도로 활착율이 저하되었다. 특히, $27({\pm}1)^{\circ}C$에서는 이병주의 증가로 건묘생산율은 모든 대목처리구에서 65% 이하였다. 일반적으로 알려져 있는 고온기 접목활착 최적온도인 $23({\pm}1)^{\circ}C$에서는 대목의 종류에 따른 건묘생산율은 84~88% 전후로 대목 품종간 유의적 차이는 없었다. 접목활착실내 상대습도 조건에 따른 최종 접목활착율은 초기 2~3일간은 상대습도를 90%로 유지하고 나머지 7~8일간은 75% 정도로 유지하는 처리구에서 100% 접목활착 성공율을 나타냈고, 전기간 90%로 유지한 처리구와 1일 90%, 9일간은 75%로 유지한 처리구에서는 90%전후의 성공률을 나타냈다. 전반적으로 높은 상대습도 유지기간이 길수록 초기 활착율은 증가하는 경향을 보였으나, 고습도에서 장기간 묘를 양생할 경우, 곰팡이병 발생 등으로 최종 건묘생산율은 감소하므로, 초기 2~3일간만 90% 전후로 유지하고 나머지 구간은 75% 전후로 유지하는 것이 고온기 토마토 접목 활착율 향상을 위한 바람직한 조건이라 판단되었다. 각 처리간 묘소질에는 큰 차이를 나타내지 않았으나, 전반적으로 활착율이 양호했던 처리구에서 묘소질이 타 처리구에 비해 상대적으로 좋았으며, 이러한 경향은 특히 근권부의 형태적 특성을 조사한 결과에서 명료하게 나타났다. 이상의 결과 고온기 토마토 활착실내의 환경관리는 23도 전후의 온도에서 $80({\pm}5)%$의 상대습도로 관리하는 것이 건묘생산에 적합할 것으로 판단되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.101-102
• /
• 2007

In order to characterize an electrical conductivity of ${\lambda}$-DNA by relative humidity, I-V characteristics through DNA on Au electrode with $1{\mu}m$ gap were measured as a function of the relative humidity. The electrical conductivity increased and the resistance decreased with an increase of humidity. The maximum effect of the humidity on the electrical property of DNA was obtained with the range from 43 to 82%. The hysteresis loop in I-V characteristics of DNA was disappeared above 92% of the humidity while the applying voltage was changed.

• 센서학회지
• /
• 제21권6호
• /
• pp.420-424
• /
• 2012

We have investigated temperature dependence and long-term change of humidity measurement from 32 relative humidity sensors. The readings of the humidity sensors depended not only the reference humidity, but also temperature of the chamber. Approximately, the temperature dependence of the humidity sensor in average was 0.05 %R.H./$^{\circ}C$ in the temperature range from $5^{\circ}C$ to $55^{\circ}C$. For humidity sensors that have an internal temperature compensation circuit, the resulting temperature dependence was weaker by 20%. It should be also noted that for the humidity sensors used in this work underwent ${\pm}3$ %R.H. change per year for level of confidence of 95%. The users of relative humidity sensors may refer this value as a minimum change when they set the calibration interval of the humidity sensors.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제9권1호
• /
• pp.71-76
• /
• 2001

Factors governing the rate of heat exchange comprise temperature, air velocity, relative humidity, and relation indoors. Recently, there are many researches on the transient analysis of indoor environmental factors such as dry bulb temperature, relative humidity and air velocity in miniature models. The purpose of this study is to measure the environmental factors and to analyze and evaluate the characteristics of indoor environment in different envelop structures using granite dome models. The interior relative humidity is constant regardless of exterior humidity although a little range of variation is shown in comparison to the cement model.

• Tribology and Lubricants
• /
• 제19권5호
• /
• pp.245-250
• /
• 2003

Water is known to playa crucial role on friction of moving parts in nanoscale contact. Little is, however, known about the tribological behavior of a solid surface that is covered with water adsorption layer. The objective of this study is to investigate the nanotribological behavior of the water layer in relation to water affinity of the surface and relative humidity. This paper presents an examination of the frictional behavior of water adsorption layer as 'confined liquid film'. It is shown that the friction is inversely proportional to the hydrophilicity of surface and relative humidity. On the other hand, friction of hydrophobic surface is not influenced by relative humidity. A model is proposed for the water-mediated contact in which it is shown that the water layer between two hydrophilic surfaces with high relative humidity behaves as a lubricant.

• 설비공학논문집
• /
• 제11권5호
• /
• pp.642-646
• /
• 1999

Factors governing the rate of heat exchange comprise the air temperature, the speed of air movement, relative humidity, and relation indoors. Recently, there are many researches on the transient analysis of indoor environmental factors such as the dry bulb temperature, relative humidity and air velocity in miniature models. The purpose of this study is to measure the environmental factors and to analyze and evaluate the characteristics of indoor environment with the different envelope structures using a granite dome model. According to the variation of humidity, the state of interior relative humidity for clay model has an equal tendency, although a little range of variation is shown in comparison to the cement model.