• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.1048-1052
• /
• 2003

This study aims to derive frequency weighting curves for the estimation of driver's discomfort by steering wheel vibration in the vertical and rotational direction with respect to a steering column. Subjective tests for the determination of equal sensation curves, inverse of frequency weighting curves, for the two kinds of vibrations were performed using the sinusoidal signals with reference amplitudes from 0.2m/s$^2$ to 0.4 m/s$^2$ in the frequency range from 5㎐ to 100㎐. Twelve subjects joined at the tests, and median values of the twelve judgments were used to determine the frequency weighting curves. Second experiment was followed to determine relative magnitude between the two frequency weighting curves by direct comparison of discomfort due to the two kinds of vibrations at 50㎐, which showed discomfort by the rotational vibration was 1.5 times of that by the vertical vibration.

• 한국군사과학기술학회지
• /
• 제8권2호
• /
• pp.38-48
• /
• 2005

Instantaneous frequency of doppler signals is used to get the information of the relative velocity and the miss distance between a missile and a corresponding target. In this paper, we have performed time-frequency analysis and instantaneous frequency estimation with Short Time Fourier Transform(STFT), Wigner Ville Distribution(WVD) and Continuous Wavelet Transform(CWT) about the doppler signals generated by moving targets. Performance evaluation was performed using simulated doppler signals generated by a single moving target and two moving targets. From the results of the time-frequency analysis, we found that WVD method was the most efficient instantaneous frequency estimator among the three methods. But in case of two moving targets, WVD method got cross talks and CWT method got oscillation when two doppler frequencies were close to each other.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2009년도 정기 학술대회
• /
• pp.530-533
• /
• 2009

This study deals with 2D and 3D nonlinear seismic damage analysis of a concrete gravity dam using the finite element program ABAQUS and the concrete damaged plasticity model. 2D and 3D spillway sections of the dam are simulated. First the frequency analysis is conducted to compare the fundamental frequency and estimate the value of damping coefficient. Then the seismic analysis is conducted using the simulated ground acceleration motion. The relative displacement between the crest and bottom of the dam is obtained and compared for the maximum value and occurrence time. The results indicate that the plane-stress assumption gives similar results of maximum relative displacement and final damage distribution with 3D analysis.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.187-190
• /
• 1998

In this paper a probe for the' measurement of dielectric properties of dielectric sheet materials is designed and implemented as a coaxial air line type. Using the broadband impedance method with this measurement probe the dielectric constant and loss tangent of the glass-epoxy and teflon are determined in the frequency range of 0.1 - l.O[GHz] with the temperature variation from $25[^{\circ}C]$ up to $65[^{\circ}C]$. A measured relative dielectric constant of the glass-epoxy is 4.42 and a loss tangents is 0.019 relatively, and the relative dielectric constants of teflon is 2.17 and a loss tangents is 0.002 relatively

• Journal of the Optical Society of Korea
• /
• 제12권1호
• /
• pp.42-48
• /
• 2008

The relative intensity noise (RIN) characteristics in 405 nm blue laser diodes grown on wurtzite AlGaInN multiple quantum well structures were investigated using the rate equations with the quantum Langevin noise model. The device parameters were extracted from the optical gain properties of the MQW active region using the self-consistent numerical method developed for calculating the multiband Hamiltonian in the strained wurtzite crystal. These methods have been applied to laser diodes for various conditions including the external feedback and the high frequency current injection.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.443-446
• /
• 2003

This study was conducted to draw design rainfall for the regional design rainfall derived by the optimal distribution and method of frequency analysis. The design rainfalls were calculated by the regional and at-site analysis for Log-Pearson type III and GEV distributions and were compared with Relative efficiency(RE) which is ratio of Relative root-mean-square error(RRMSE) by the regional and at-site analysis for Log-Pearson type III and GEV distributions. Consequently, optimal design rainfalls following the regions and consecutive durations were derived by the regional frequency analysis for GEV distribution and design rainfall maps were drawn by GIS techniques.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.158.2-158
• /
• 2001

This paper introduces the design and implementation of a signal processing system for an airborne active homing radar system. This airborne active homing radar system uses the pulse Doppler radar of high PRF (Pulse Repetition Frequency) for computation of exact relative velocity of the target. This system carries out two operations mainly. The first is to transmit and receive microwave signal through the antenna. The second is to calculate the relative velocity of the target taking advantage of the Doppler frequency signal reflected from the target and detect the angle error between a target and an antenna LOS (Line Of Sight) to make the antenna direction coincident with the target. The signal processing system has a role of the latter.

• 전자공학회논문지A
• /
• 제33A권2호
• /
• pp.69-77
• /
• 1996

We analyzed wideband propagation characteristics of a microstrip transmission line based on FR-4 composite substrate using the wideband complex dielectric constant model and the phenomenological loss equivalence method. The loss calculated by constant relative permittivity and loss tangent is greatly overestimatd compared to that calculated by the frequency-dependent complex relative permittivity. This wideband analysis can be helpful to characterize high-speed and high-density transmission lines associated with the wideband dielectric characteristics and shows that the FR-4 composite substrate has high potential of high frequency circuit applications in terms o fthe propagation loss.

• 전자공학회논문지D
• /
• 제34D권3호
• /
• pp.17-24
• /
• 1997

Broad-band RAM's (Radar absorbing materials) are designed by multi-layered lossy dielectrics. The depth, the relative permittivity and the loss tangent of each layer are optimized in order to meet the required reflective power over the specified frequency range using a genetic algorithm. The reflection coefficients are calculated by the continued fraction method. A new population model of the partial initialization method during iterations is applied for the multi-modal functions to enhance the performance of the genetic algorithm. The optimal RAN's are designed by setting the relative permittivity and the loss tangent of the dielectrics as a funtion of the frequency over 5~20GHz.

• 한국정보통신학회논문지
• /
• 제9권3호
• /
• pp.510-515
• /
• 2005

도플러 확산은 송수신단의 이동에 따라 발생하며 송수신단의 상대적인 위치 및 이동속도에 따라 도플러 주파수 변이 정도가 다르게 나타난다 본 논문에서는 앞으로 폭 넓게 활용될 것으로 예상되는 OFDM(Orthogonal Frequency Division Multiplexing) 통신방식을 적용했을 경우를 가정하여 다양한 무선채널에서의 도플러 확산에 의한 성능 열화 현상을 안테나 다이버시티(diversity) 효과를 활용하여 어느 정도까지 개선할 수 있는지를 분석하였다. 이를 위하여 다양한 무선채널 모델을 설정하고 도플러 확산에 따른 SIR(Signal to interference) 값 및 SIR을 고려한 effective SNR을 계산하였다. 이러한 결과들을 바탕으로 도플러 확산 정도에 따른 다이버시티 효과를 구체적으로 분석하기 위하여 수신단에서의 BER 개선 정도를 고찰하였다.