• 한국해양공학회지
• /
• 제17권6호
• /
• pp.91-95
• /
• 2003

Yacht design is significantly affected by the hull geometrical characteristics. Therefore, it is necessary to closely examine the relation between hull and performance, before considering characteristics of sea condition. In this study, Genetic Programming is used to derive a formula the relationship between hull geometric characteristics and performance. Using the formula, a new guideline is proposed to determine performance of a yacht.

• 해양환경안전학회지
• /
• 제21권5호
• /
• pp.543-551
• /
• 2015

본 논문에서는 교량, 선박 등에 사용하고 해양환경을 고려한 알루미늄 합금(A6082-T-6) 플레이트 거더의 물리적 관계를 살펴보고자 한다. 플레이트 거더는 제품수명주기에 이동하중, 적재하중 등 같은 패치로딩을 경험하게 된다. 이 하중을 받는 알루미늄합금 플레이트 거더의 최종강도에 대해 다수 수치모형을 적용하여 탄소성 대변형 시리즈 해석을 수행하고 회귀분석을 통해 예측식을 제안하였다. 예측식은 최종강도와 세장변수의 상관관계로 나타냈으며 세장변수가 낮을 경우(0-2.3) 약 9 % 정도 오차가 발생하며 높을 경우(2.3-4.0) 약 1-2 % 정도 오차가 발생하였다. 따라서 제안 예측식 적정성은 합리적으로 평가할 수 있는 것으로 확인되었다.

• 한국지반신소재학회논문집
• /
• 제19권4호
• /
• pp.33-40
• /
• 2020

최근 대규모 택지개발 현장에서 굴착공정 중 매립폐기물이 발견되는 사례가 빈번히 발생되고 있다. 발생된 매립폐기물을 환경적으로 처리하기 전에는 대상지역의 개발사업을 진행할 수 없으며, 매립폐기물에 대한 처리대책을 수립하여 환경적이고 경제적으로 처리하여야 한다. 본 연구에서는 매립폐기물의 처리에 있어 단가 산정의 기본적인 계수가 되는 매립폐기물의 겉보기밀도와 체적환산계수의 상관관계를 분석하고자 하였다. 이를 위하여 ◯◯지역의 사용종료 매립지 10지점에서 매립폐기물을 채취하여 물리적성상을 분석한 후, 성상별 및 혼합폐기물의 겉보기밀도를 측정하였다. 매립폐기물의 겉보기밀도와 체적 환산계수의 상관관계를 분석하기 위하여, 매립폐기물의 겉보기밀도로부터 유추한 체적환산계수와 실측한 체적환산계수, 경험식에 의한 체적환산계수를 비교하였다. 분석결과, 겉보기밀도로부터 유추한 체적환산계수, 경험식에 의한 체적환산계수, 그리고 실측한 체적환산계수는 일정한 상관관계를 나타내고 있어, 겉보기밀도와 체적환산계수에 관한 기초자료로서 활용할 수 있을 것으로 판단된다.

• 대한영양사협회학술지
• /
• 제11권2호
• /
• pp.159-169
• /
• 2005

The purpose of this study was to assess the energy expenditure and investigate the relationship between related variables in 70 female university students. Resting energy expenditure estimated by Harris-Benedict formula, WHO/NAO/FAO formula and various formulas based on body weight and body surface area were 1366.9$\pm$74.4kcal/day, 1287.8$\pm$106.6kcal/day, 1171.4$\pm$155.8kcal/day and 1342.0$\pm$97.4kcal/day. Measured resting energy expenditure by indirect calorimetry(Model : Metavine and TrueOne2400) were 1582.0$\pm$150.1kcal/day and 1268.2$\pm$152.9kcal/day, respectively. Average step number per day was 11981.2$\pm$3014.4 steps and average step number per hour was 746.1$\pm$198.0 steps/hr. Daily energy expenditure by using Harris-Benedict formula, body weight formula, body surface area formula, WHO/NAO.FAO formula and 15-min check list formula were 2374.7$\pm$249.6kcal, 2033.5$\pm$313.2kcal, 2331.2$\pm$266.0kcal, 2240.8$\pm$185.5kcal and 2195.5$\pm$398.3kcal. Meanwhile energy intake of subjects was 1714.9$\pm$551.2 kcal. Daily energy expenditure has positive correlation(r=0.262) with daily step number. And there was significant positive correlations(r=0.35-0.68) between various daily energy expenditures and muscle mass. These results suggested that increase of daily step number by using pedometer is good method to increase daily energy expenditure. In particular, increase in step number can reinforce the amounts of muscle.

• 수산해양기술연구
• /
• 제28권4호
• /
• pp.380-384
• /
• 1992

통발 구멍의 직경을 4단계로 만들어 1988년 10월중에 남부해역에서 부산수산대학 실습선 402호와 403호로 조업을 하여 어획한 붕장어 Astroconger Myriaster의 전장을 측정하여 붕장어에 대한 장(1987)의 어체제원간 관계식의 타당성과 플라스틱 통발 구멍의 적정직경을 알아본 결과를 요약하면 다음과 같다. 1. 어체제원간의 관계식 D=0.07L-0.59은, 통발구멍의 직경 D값에 대한 전장 L 값 이상으로의 어획율이 P1, P2, P3와 P4 각각 97.4, 94.9, 100.0, 96.0%로 매우 타당성이 있다. 2. 붕장어 플라스틱 통발 구멍의 적정직경은 적어도 1.5cm 이상은 되어야 한다.

• Computers and Concrete
• /
• 제30권3호
• /
• pp.225-236
• /
• 2022

In this article, Multi-Gene Genetic Programming (MGGP) is proposed for the estimation of the compressive strength of concrete. MGGP is known to be a powerful algorithm able to find a relationship between certain input space features and a desired output vector. With respect to most conventional machine learning algorithms, which are often used as "black boxes" that do not provide a mathematical formulation of the output-input relationship, MGGP is able to identify a closed-form formula for the input-output relationship. In the study presented in this article, MGPP was used to predict the compressive strength of plain concrete, concrete with fly ash, and concrete with furnace slag. A formula was extracted for each mixture and the performance and the accuracy of the predictions were compared to the results of Artificial Neural Network (ANN) and Extreme Learning Machine (ELM) algorithms, which are conventional and well-established machine learning techniques. The results of the study showed that MGGP can achieve a desirable performance, as the coefficients of determination for plain concrete, concrete with ash, and concrete with slag from the testing phase were equal to 0.928, 0.906, 0.890, respectively. In addition, it was found that MGGP outperforms ELM in all cases and its' accuracy is slightly less than ANN's accuracy. However, MGGP models are practical and easy-to-use since they extract closed-form formulas that may be implemented and used for the prediction of compressive strength.

• 한국농공학회지
• /
• 제30권4호
• /
• pp.109-116
• /
• 1988

This study was aimed at determining a regime of flow through rubble mound dike consisted of all sized quarrystons, and deriving a relationship between hydraulic gradient (I) and mean flow velocity (V) through the dike. The analysis was carried out with the data observed after final gap closing of the Haenam Sea dike from May, 6 to May, 14, 1987. The resu]ts are summarized as follows: 1. The regime of flow would be defined as the turbulent flow. 2. As to the relationships, two kinds of formula that are exponential and binomial were obtained. Exponential formula: I=2.099V 1.2888 Binomial formula: I=0.6113V+5.5235V$^2$ 3. Correlation coefficient of the former was 0.824 and that of the latter was 0.821, and the deviations between observed data and estimated were 0.0070 and 0.0064 respectively. 4. Comparing the correlation coefficient, both the equations have the same correlation coefficients, but in case of the deviation the binomial equation was better than the exponential equation. Therefore, the binomial equation is proposed for analyzing the flow through rubble mound dike.

• 대한설비공학회지:설비저널
• /
• 제17권4호
• /
• pp.466-472
• /
• 1988

Pneumatic transportation systems are operated most economically, if the transportation velocity is somewhat greater than the limit velocity. Therefore it is very important to find out this limit velocity. That is well known for coarse and fine particles, but not yet for long ribbon type material. In this study a formula for the mass ratio of transported material to air in limit load point is derived for ribbon type material from the pneumatic transportation theory and the model theory. A relationship for estimating the limit velocity is also found out through experiments. The possibility of the generalization of this formula, which is obtained from a given pneumatic transportation system, should be estimated through further systematic studies.

• 한국강구조학회 논문집
• /
• 제29권5호
• /
• pp.341-352
• /
• 2017

강구조물을 접합하는 대표적인 두 가지 방법으로는 용접접합과 볼트접합이 있다. 이중 잘 접합된 볼트접합은 지압메카니즘에 의한 강도상승과 연성거동을 기대할 수 있다. 이러한 볼트접합부의 연성능력을 충분히 활용하기 위해 본 연구에서는 합리적인 단일볼트접합부의 힘-변형관계 및 지압강도 산정식을 제안하고자 하였다. 볼트접합부의 경계조건 및 기하학적인 요소를 고려하여 체계적으로 단일볼트 실험을 수행하였다. 현행 설계기준의 볼트접합부의 지압강도 산정식의 모순점을 해결하기 위해 새로운 지압강도 설계식 및 변형한계 산정식을 제안하였다. 또한 접합부의 강성, 강도, 기하학적 조건 등을 반영할 수 있는 힘-변형관계식을 제안하였다. 본 연구에서 제시한 지압강도식 및 힘-변형관계식은 현행설계기준보다 합리적으로 실험결과를 예측하였다.

• Journal of Nutrition and Health
• /
• 제19권1호
• /
• pp.3-15
• /
• 1986

This study was intended to investigate the rheological properties of the development formula of infant foods and the results are summarized as follow ; 1) Consistency of starch solutions measured by Brabender Anylograph and Brookfield viscometer showed that waxy rice and riece with malt had lower consistency and more rheological stability.The flow type of tested raw materials and formula was found to ？ pseudoplastic, as judged by n-value of 0.332 -0.692, and no yield value. 2) The influenced of temperature on consistency could be accounted for by the equation, In (n) = K(1/T) + const. this relationship indicated that consistency of tested sample increased as temperature decreased. The consistency of waxy rice, rice with malt and formula A were less affected by the temperature change. 3) Infant foods with malt(formula A ) ad with waxy rice maintained better freeze-thaw stability in terms of consistency and starch aggregation indicating that this infant food could be stored for a long term in the freezer section of the home refrigeratory without adverse effect on the product quality. 4) From the above experiments, it would necessarily follow that infant food can be easily made at home the food-stuffs generally available around us, and that the easiest and safest way to store them lies in making them into semisolid state, and in keeping them in frozen state.