• 한국강구조학회 논문집
• /
• 제29권5호
• /
• pp.341-352
• /
• 2017

강구조물을 접합하는 대표적인 두 가지 방법으로는 용접접합과 볼트접합이 있다. 이중 잘 접합된 볼트접합은 지압메카니즘에 의한 강도상승과 연성거동을 기대할 수 있다. 이러한 볼트접합부의 연성능력을 충분히 활용하기 위해 본 연구에서는 합리적인 단일볼트접합부의 힘-변형관계 및 지압강도 산정식을 제안하고자 하였다. 볼트접합부의 경계조건 및 기하학적인 요소를 고려하여 체계적으로 단일볼트 실험을 수행하였다. 현행 설계기준의 볼트접합부의 지압강도 산정식의 모순점을 해결하기 위해 새로운 지압강도 설계식 및 변형한계 산정식을 제안하였다. 또한 접합부의 강성, 강도, 기하학적 조건 등을 반영할 수 있는 힘-변형관계식을 제안하였다. 본 연구에서 제시한 지압강도식 및 힘-변형관계식은 현행설계기준보다 합리적으로 실험결과를 예측하였다.

• 대한토목학회논문집
• /
• 제30권4A호
• /
• pp.383-389
• /
• 2010

현재 우리나라의 콘크리트구조설계기준은 강도설계법에 근간하고 있다. 강도설계법에 의해 휨부재를 설계할 경우, 콘크리트 응력-변형률 관계는 사용하중 상태에서 선형으로 가정하지만 이후 극한한계 상태까지에 대해서는 규정되어 있지 않다. 이로 인해 콘크리트구조설계기준에서는 처짐 및 균열폭 등의 산정에 대해 개별적인 규정을 두고 있다. 그러나 한계상태설계법에 근거한 EC에서는 재료에 대한 응력-변형률 관계를 규정하고 있다. 따라서 재료의 응력-변형률 관계로부터 휨강도 및 처짐 등을 직접 계산할 수 있다. 본 연구에서는 휨부재에 대하여 주어진 재료 모델을 바탕으로 평형방정식과 적합조건식을 적용하여 휨모멘트-곡률 관계를 계산하였다. 이로부터 휨강도 및 처짐을 산정하여 현행 콘크리트구조설계기준에 의한 값과 비교하였다. 해석 결과 재료 모델로부터 휨모멘트-곡률 관계를 통해 산정된 처짐은 실험 결과와도 비교적 잘 일치하고, 항복 이후의 처짐 계산도 가능한 것으로 나타났다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.649-655
• /
• 2010

Unsaturated compressive tests are performed to evaluate the effect of matric suction on the strength and the deformation characteristics for statically compacted natural kaolin in Korea. Under different conditions of the initial degree of saturation in kaolin, the relationship between suction and the degree of saturation at failure can be expressed by unique soil-water characteristic curve. These results demonstrate that the newly established constant water content type unsaturated shear strength test equipment can be used for estimating the relationship between suction and the compressive strength.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.468-474
• /
• 1997

High strength concrete is a more effective material for columns subject to axial force and moment than for other structural elements. The purpose of this study is to review strength calculation methods for high strength concrete columus by comparison of analytical values and experimental results. The variables of column test under eccentric loading were concrete compressive strength, longitudinal steel ratio, and eccentricity of load. The tied column sections of 120×120mm and 210×210mm were tested and the eccentricity of load varied in the range from 0.16 times to 0.54 times the column depth. The analytical results using the stress-strain relationship to 0.54 times the column depth. The analytical results using the stress-strain relationship as well as the ACI's rectangular block, Zia's modified block, and the trapezoidal block are compared with experimentally obtained data, and discussed in this paper.

• 융합경영연구
• /
• 제10권2호
• /
• pp.15-22
• /
• 2022

Purpose: This study explores the effect of employee's growth needs strength on counterproductive work behaviors. Perceived job insecurity was also examined as a moderating variable on the relationship between the two variables. Research Design, data and methodology: This study collected 108 data samples from working individuals from South Korea. The Exploratory Factor Analysis (EFA) and the hierarchical regression analysis were used to analyze the data. Hierarchical regression analysis was performed using SPSS 24.0. Results: Our research results indicated that employee's growth needs strength has a negative effect on counterproductive work behaviors. Perceived job insecurity moderates the relationship between the two variables. Conclusions: Organizations should focus on creating growth opportunities for employees, since facilitating employee's growth need strength will counteract the desire to engage in behaviors that can be detrimental to the organization. and its members.

• 한국도로학회논문집
• /
• 제7권3호
• /
• pp.63-69
• /
• 2005

콘크리트 포장의 품질관리 항목 중에서 압축 강도는 매우 중요한 인자로 여겨져 왔다. 압축 강도 값을 얻기 위해 현장에서 코아를 채취하여 이를 품질관리의 기준으로 사용하였다. 그렇지만, 코아를 채취하는 것은 많은 인력과 시간을 필요로 하며 실제로 현장의 품질관리를 정확히 추정하는데 많은 어려움이 있다. 또한 포장의 설계 방법도 탄성계수에 근거한 역학적-경험적 방법이 도입되고 있다. 이러한 현장의 품질관리 문제점을 해결하고, 포장설계와의 연계를 위해 비파괴 실험방법이 도입되고 있다. 다양한 비파괴 실험 방법 중에서 이론적으로 탄성계수를 추정할 수 있는 방법은 Wave Propagation방법이므로 본 연구에서는 Wave Propagation 방법을 도입하였다. 본 연구에서는 현장의 품질관리를 수행하는 방법 중의 일환으로 실내에서 제작한시편의 압축 강도와 비파괴 방법으로 얻은 탄성 계수와의 상관성을 검토하였으며, 비파괴 방법으로 얻은 탄성 계수로부터 압축 강도를 추정 할 때 배합별 특성에 대한 분석을 실시하였다. 비파괴 실험에서 구한 탄성계수와 압축강도와의 상관성은 매우 우수한 것으로 판명되었으며, 골재의 종류별로 상관성이 서로 상이하게 나타남을 알 수 있었다.

• 한국포장학회지
• /
• 제11권2호
• /
• pp.91-96
• /
• 2005

Determination of safety factor of corrugated fiberboard boxes used for agricultural products is very complicated process due to nature of living products. Moisture content is one of the most critical factors to determine overall physical strength of paper, so its influences on strength properties of corrugated board made from different raw materials must be quantified. The results obtained from the study were summarized as follows; 1. Results show a detrimental effect on bursting strength and compressive strength of liners with increasing relative humidity of environment and moisture content of liners. 2. The relevance of equilibrium moisture content at varying relative humidity levels was proved and its relationship was used as an important factor to estimate box compression strength. 3. Test results was statistically used for establish the relationship between relative humidity and moisture content of liners. Estimated compression strength of boxes at varying moisture content was similar to results of theoretical equations such as Kellicutt's. Further study could be carried out in order to determine a optimum safety factors of various corrugated board boxes for agricultural products.

• 대한물리의학회지
• /
• 제13권4호
• /
• pp.27-33
• /
• 2018

PURPOSE: This study was conducted to identify the relationships among stress response inventory, hospital anxiety and depression, muscle tone and stiffness, and hand strength in chronic stroke patients. METHODS: A total of 14 chronic stroke patients voluntarily agreed to this experiment and were included in this study. All measurements were performed in one day and in a room without noise. The tests conducted in this study were as follows: muscle tone and stiffness of the upper trapezius hand grip measurement. Subjects were also asked to complete surveys describing the following: stress response inventory and hospital anxiety and depression scale. RESULTS: There were significant correlations among stress response inventory and hospital anxiety and depression, stress response inventory and hand strength, and hospital anxiety and depression and hand strength (P<.05). There were high positive correlations between stress response inventory and hospital anxiety and depression (r=.979), while there were moderate negative correlations between stress response inventory and hand strength (r=-.415) and between hospital anxiety and depression and hand strength (r=-.420). CONCLUSION: The results of the present study indicate that there is a relationship among stress response inventory, hospital anxiety and depression, and hand strength in patients with chronic stroke.

• Tribology and Lubricants
• /
• 제20권1호
• /
• pp.7-13
• /
• 2004

High strength steels are widely used as tribo-materials in the field. Previous study revealed that for mild steel, the states of strain on the worn surface measured by X-ray diffraction has a good relationship with the state of wear. The objective of this study is to identify the relationship between the state of strain on the worn surface and the state of wear in high strength steels. Sliding wear tests were carried out using several hardened steels. X-ray diffraction tests were conducted to analyze the state of strain on the worn surface during wear. The experimental results indicated that the state of strain on worn surface in the hardened steel shows the same tendency as in the mild steel. It is clear that change of half value width on the worn surface as a function of sliding speeds is broadly similar in shape to wear characteristics curve and its magnitude has a good relationship with the wear rate at two different wear modes in the hardened steel.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.834-839
• /
• 2003

Previous research has been conducted on an ultrasonic wave reflection method that utilizes a steel plate embedded in the concrete to measure the reflection loss of shear waves at the steel-concrete interface. The reflection loss has been shown to have a linear relationship to compressive strength at early ages. The presented investigations continue this research by examining the fundamental relationship between the reflection loss, measured with shear waves, and the hydration kinetics of Portland cement mortar, represented by dynamic elastic moduli, compressive strength and degree of hydration. Dynamic elastic moduli are measured by fundamental resonant frequency and degree of hydration is determined by thermogravimetric analysis. The water/cement ratio was varied for the tested mixture compositions. The results presented herein show that compressive strength, dynamic shear modulus and degree of hydration have a linear relationship to the reflection loss for the tested mortars at early ages.