• Korean Journal of Ichthyology
• /
• v.36 no.2
• /
• pp.182-187
• /
• 2024

Feeding habits of the large yellow croaker, Larimichthys crocea, was studied using 816 specimens collected by large pair-trawl fishery from June 2021 to May 2022 in the coastal waters of Jeju Island, Korea. The range of total length was 19.8~57.4 cm. Using the IRI, Pisces were mainly prey component constituted 57.5%. Euphausiacea and Macrura were important prey component constituted 23.2% and 18.7%, respectively. There was a significant difference in the change in diet composition by size group. As the L. crocea grew, the feeding rate of Euphausiacea decreased and the feeding rate of Pisces increased. There were also significant differences in the changes in diet composition by seasonal group. The most important prey species for L. crocea in the winter and spring were Pisces, in the summer it was Macrura, and in the fall it was Euphausiacea. As a result of analyzing the feeding relationship between size groups and season groups, L. crocea showed significant differences in the interaction between size groups and season groups.

• Journal of the Society of Disaster Information
• /
• v.20 no.1
• /
• pp.40-46
• /
• 2024

Purpose: In this study, in order to ensure the evacuation safety of plant facilities, we analyze the relationship between the height of smoke removal boundary walls, the presence or absence of smoke removal equipment, and evacuation safety. Method: Using fire and evacuation simulations, evacuation safety was analyzed through changes in the height of the smoke removal boundary wall, air supply volume and exhaust volume according to vertical dista. Result: In the case of visible drawings, if only 0.6m of boundary wall is used, the time below 5m reaches the shortest, and 1.2m of boundary width is 20% longer than when using smoke removal facilities. In the case of temperature, 1.2m is 20% longer than 0.6m when only the boundary width is used without smoke removal facilities. Conclusion: It was found that increasing the length of the smoke removal boundary wall could affect visibility, and installing a smoke removal facility would affect temperature. Therefore, it is determined that an appropriate smoke removal plan and smoke removal equipment should be installed in consideration of the process characteristics.

• Journal of Life Science
• /
• v.34 no.2
• /
• pp.122-127
• /
• 2024

This study investigated the reproductive ecology and spawning of Hoplobrotula armata on the coast of Jejudo Island. Samples were collected from February to December 2019 and February to December 2020, with a total of 2,634 samples. The results of the investigation showed that total length (TL) ranged from 22.0 cm to 68.8 cm, and the body weight (BW) ranged from 66.5 g to 3,553.9 g. According to the development process of gonads and the gonadosomatic index (GSI), the spawning period of H. armata was from July to October. The relationship between TL and BW was BW = 0.0024TL^3.3278 in females and BW = 0.0035TL^3.2162 in males. The sex ratios of surveyed female to male H. armata was 1:0.71, with more females. At 50%, 75%, and 97.5%, the group maturities of H. armata were as follows: Females, 39.9 cm, 42.7 cm, and 49.4 cm; males, 37.6 cm, 40.4 cm, and 46.9 cm, respectively. According to monthly GSI and gametocyte (ovarian, testis) development stage observations of H. armata on the coast of Jejudo Island, they spawn once a year and are presumed to be summer spawners.

• Anatomy and Cell Biology
• /
• v.57 no.2
• /
• pp.172-182
• /
• 2024

This study aimed to evaluate the superficial anatomy, kinesiology, and functions of the hand to reveal its morphometry and apply the findings in various fields such as prosthetic hand and protective hand support product design. We examined 51 young adults (32 females, 19 males) aged between 18-30. Hand photographs were taken, and measurements were conducted using ImageJ software. Pearson correlation analysis was performed to determine the relationship between personal information and the parameters. The results of the measurements showed the average lengths of finger segments: thumb (49.5±5.5 mm), index finger (63.9±4.1 mm), middle finger (70.7±5.2 mm), ring finger (65.5±4.8 mm), and little finger (53.3±4.3 mm). Both females and males, the left index finger was measured longer than the right index finger. The right ring finger was found to be longer than the left in both sexes. Additionally, length differences between fingers in extended and maximally adducted positions were determined: thumb-index finger (56.1±6.2 mm), index-middle finger (10.7±4.1 mm), middle-ring finger (10.8±1.4 mm), and ring-little finger (25.6±2.7 mm). Other findings included the average radial natural angle (56.4°±10.5°), ulnar natural angle (23.4°±7.1°), radial deviation angle (65.2°±8.2°), ulnar deviation angle (51.2°±9.6°), and grasping/gripping angle (49.1°±5.8°). The average angles between fingers in maximum abduction positions were also measured: thumb-index finger (53.4°±6.5°), index-middle finger (17.2°±2.6°), middle-ring finger (14.3°±2.3°), and ring-little finger (32.1°±7.0°). The study examined the variability in the positioning of proximal interphalangeal joints during maximum metacarpophalangeal and proximal interphalangeal flexion, coinciding with maximum distal interphalangeal extension movements. The focal points of our observations were the asymmetrical and symmetrical arches formed by these joints. This study provides valuable hand parameters in young adults, which can be utilized in various applications such as prosthetic design, ergonomic product development, and hand-related research. The results highlight the significance of considering individual factors when assessing hand morphology and function.

• Journal of Bio-Environment Control
• /
• v.33 no.1
• /
• pp.37-44
• /
• 2024

This study was conducted to validate the growth and productivity of cucumber hydroponics using coir as the medium, different types of nutrient solutions and formal methods, in order to select the most efficient cultivation method. The nutrient solutions consisted of culture solution (S) and raw water (W), the planting methods were rockwool cube seedlings (RC), rockwool plug seedlings (RP), and slab directly seedlings (DS). The reference date was set the sowing date. The initial growth showed a significant increase in the culture solution treatment, the differences among treatments decreased as the growth period lengthened. There was no apparent correlation between the planting methods and growth, but different results were observed among the same planting methods depending on nutrient solution used. Similarly, productivity followed a similar trend, with significantly higher harvest in the culture solution treatment during the initial harvest period of 6-8 weeks after sowing, but the harvest gap among treatments were diminished in the after period. The cumulative harvest was significantly higher in the culture solution treatment due to the initial difference in harvest quantity. Plant growth and fruit productivity exhibited a similar trend, showing a linear relationship. There was no correlation among the planting methods, but direct seedling with the culture solution showed the highest initial growth and harvests due to stable nutrient and moisture supply in the initial root zone. Therefore, it is believed that direct seeding method on the culture solution medium would be most advantageous for plant growth and productivity. Additionally, it is expected to contribute to cost effectiveness from an economic perspective through simplification of the cultivation process, labor costs and production cost reduction

• Journal of Dental Rehabilitation and Applied Science
• /
• v.40 no.3
• /
• pp.179-188
• /
• 2024

To enhance the predictability of aesthetic treatment outcomes in aesthetic prosthetic restorations, considerations must include analysis of facial features, the relationship between teeth and lips, proportions of tooth width/length, gingival form, and more. Traditional diagnostic wax-ups have limitations in considering the patient's facial features and are unable to facilitate rapid form modifications. With recent advancements in digital technology, it is now possible to digitize the patient's facial features in three dimensions, enabling the design of restorations that harmonize with facial features. These digital workflows not only improve efficiency but also provide patients with faster visualization of treatment outcomes, thereby enhancing motivation. Therefore, in this case, a treatment plan is devised to utilize digital diagnostic wax-ups considering the patient's facial features for the final prosthetic design.

• Clinical and Experimental Pediatrics
• /
• v.52 no.11
• /
• pp.1228-1233
• /
• 2009

Purpose : This study aimed to evaluate whether a shorter time from the arrival at a hospital to delivery is related to the occurrence of cerebral palsy in premature infants of less than 34 weeks of gestational age. Methods : We studied 142 newborns of less than 34 weeks of gestational age. The time from the arrival at the hospital to delivery was measured. The correlation between the time required for delivery and the occurrence of cerebral palsy was elucidated by diagnosing cerebral palsy in neonates using the Korean Infant Development Screening Test and neurological examination. Results : Preliminary result suggested that a shorter time from hospital arrival to delivery was related to a lower development score for gross motor activity and to a higher frequency of cerebral palsy occurrence. Moreover, it was responsible for a tendency of obtaining lower Apgar scores at 1 and 5 minutes. The shorter delivery time was associated with a higher probability of respiratory distress syndrome (RDS) occurrence when the length of delivery time was less than 6 hours and there was a higher probability of a shorter gestation period. However, the multifactor analysis revealed that there was little impact of delivery time on the occurrence of cerebral palsy. Conclusions : The length of hospital arrival time to delivery did not significantly influence the occurrence of cerebral palsy in premature infants of less than 34 weeks of gestational age.

• Journal of Aquaculture
• /
• v.7 no.4
• /
• pp.189-205
• /
• 1994

Formerly, adult-tiger puffer, Takifugu rubripes with ova caught in the sea, were used for seedling production. But it was difficult to secure naturally-ripened adults. For the purpose of adult tiger puffer in captivity, this study was carried out. To determine the growth 220 tiger puffers hatched in 1990 (3-year-old) and 1991 (2-year-old) were used. For spawning and egg incubation leading to fry development, eggs were stripped from tiger puffers hatched in 1988 (5-year-old) and 1990 (3-year-old) through human chorionic gonadotropin (BCG) treatments. In May, 1993, mean body length and mean body weight of 2-year-old tiger puffer were $30.72\pm1.35cm\;and\;1,048\pm228 g,$ and that of 3-year-old tiger puffers were $36.02\pm1.17cm$ and $1,402\pm66g$ respectively. The relationship between body length (L) and body weight (W) of 2-year-old the tiger puffers during the experiment period was represented as $W\;=\;1.7892L^{31524}\times10^5$ (r= 0.9436) and that of 3-year-old, $W=\;3.2840L^{36099}\times10^6$ (r= 0.9070) respectively. The GSI in female 2-year-old-fish changed from $0.23\times0.l2\;to\;0.74\pm0.08$, during the experiment period, and in male it didn't change remarkably until November, but thereafter it increased and showed a peak of $8.69\pm5.09$. The GSI of 3-year-old-fish showed a peak of $8.05\pm5.58$ in April in female and $12.65\pm4.60$ in May in male. The change of HSI in 3-year-old-fish was correlative to the change of GSI, but in 2-year-old-fish it was little correlative. In female gonad of 2-year-old tiger puffer, the mature oocytes reached $350{\mu}m$ in April, but thereafter they didn't spawn and became atrophied. But in male gonad, a great number of spermatozoa were crowded in the testicular lobuli in April. Female gonad of 3-year-old tiger puffer had the mature oocytes of 650 pm in March and the ripe oocytes, $900{\mu}m$ in April. Male testis development was similar to that of 2-year-old-fish. Egg-stripping after hormone treatments was possible past 139 hours and 142 hours from each of two 5-year-old-fish (500IU/kg, BW), and after 114 hour from a 3-year-old-fish (1,000 IU/kg, BW) under water temperature $16.3\~17.8^{\circ}C$. Eggs stripped amounted was 650 g and 400 g from two 5-year-old-fish and 610 g from the 3-year-old-fish, and fertilization rates were $98.0\%,\;97.4\%\;and\;96.5\%$ respectively. All the hatched larvae devloped into normal fry.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.3
• /
• pp.44-55
• /
• 1987

In order to study the effect of sawdustboard combined with plastic chips, 0.5mm($T_1$), 1mm($T_2$), 1.4mm($T_3$) thick nylon fiber. polypropylene rope fiber(RP), and 0.23mm thick moth-proof polypropylene net fiber(NP) were cut into 0.5, 1, 2cm long plastic chips. Thereafter, sawdustboard combined with plastic chips prepared as the above and plastic non-combined sawdustboard(control) were manufactured into 3 types of one-, two-, and three layer with 5 or 10% combination level. By the discussions and results at this study, the significant conclusions of mechanical and physical properties were summarized as follows: 1. The MORs were shown in the order of 3 layer> 2 layer> 1 layer among plastic non-combined boards, and $T_3$ < $T_2$ < $T_1$ < RP (NP(5%) < NP(l0%) among plastic combined boards. In 2cm long plastic chip in 1 layer board, the highest strength through all the composition was recognized. 1 layer board showing the lower strength with 0.5cm plastic chip rendered to the bending strength improvement by 2 or 3 layer board composition. On the other hand, 2 or 3 layer combined with 1, 2cm long polypropylene net fiber chips incurred MOR's conspicuous decrease requiring optimum plastic chip combined level and consideration to combined type. 2. MOE in plastic non-combined 3 layer board exhibited sandwich construction effect by higher resin content application to surface layer in the order of 3layer>1layer>2layer with the highest stiffness of the board combined with polypropylene chip, while nylon chip-combined board had little difference from plastic non-combined board. In relevant to length and layer effect, 3 layer board combined with the 0.5cm long polypropylene net fiber chip in 5% and 10% combined level presented 34-43% and 44-76% stiffness increase against plastic non-combined board(control), respectively. Moreover, in 1 layer board, 30% stiffness increase with 10% against 5% combined level in the 1 and 2cm long polypropylene net fiber chip was obtained. 3. Stress at proportional limit(Spl) showing the fiber relationship (r: 0.81-0.97) between MOR presented in the order of 1 layer<2 layer<3 layer in plastic non-combined board. Correspondingly, combined effect by layer and plastic chip length was similar to MOR's. 4. Differently from previous properties(MOR, MOE, Spl). work to maximum load(Wml) of 2 layer board approached to that of 3 layer board. Conforming the above phenomenon. 2 layer combined with 0.5cm long polypropylene net fiber chip kept the greater work than 1 layer. The polypropylene combined board superior to nylon -and plastic non - combined board seemed to have greater anti - failing capacity. 5. Internal bond strength(IB), in contrast to MOR's tendency. showed in the order of T1

• Journal of Sericultural and Entomological Science
• /
• v.7
• /
• pp.1-26
• /
• 1967

In order to develop the standards for the measurement of drought resistance in mulberry trees (Morus genus) the varietal differences of drought resistance were measured for 30 mulberry varieties, and the relationships between the drought resistance and the histological and physiological characteristics of mulberry leaves were investigated. The results were summarized as follows; 1. It is reasonable to use the drought resistance ratio, expressed by D/D'＊100, for the standard of drought resistance measurement for mulberry tree as a perennial tree crop. Where: D stands for growth amount(shoot length) in the plot of dry treatment, at the end of treatment. D' stands for an expected value of D which is expressed by B＊C/A. Here, A is the growth amount of wet treatment plot at the beginning of treatment, B is the growth amount of dry treatment plot at the beginning of treatment, and C is the growth amount of wet treatment plot at the end of treatment. 2. The results obtained from the application of above formula showed that the varieties Cadaneo, Tahozosaeng, Yongchunchuwu, Kaeryang suban. and Kabsun were highly resistant to drought and the varieties Jukmok, Shipyung, Sobun, Kaeryangzosaeng shipmoonza and Chungagokyo were highly susceptible. 3. Among leaf tissues. the rate of inter-cellular space showed the highest relationship with drought resistance. The correlation coefficient calculated (r=0.4153) was highly significant. Other leaf tissues such as epidermis and palisade showed no significant correlations with drought resistance. 4. The size and density of stomata were correlated to drought resistance. That is: Correlation between drought resistance and size of stomata(length ${\times}$ width)......r= -0. 3253(signif. at 5%) density(No. of stomata/l$\textrm{mm}^2$......r= +0.5047(signif. at 1%)