• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.438-443
• /
• 1998

Softening os the name used for decreasing bending moment at advanced flexural deformation. To accommodate softening deformation in analysis, it is assumed that a hinge has finite length. The softening analysis of R/C frames relies on the primary assumption that softening occurs over a finite hinge length and that the moment-curvature relationship for any section may be closely described by a trilinear approximation. A stiffness matrix for elastic element with softening regions are derived and the stiffness matrix allows extension of the capability of an existing computer program for elastic-plastic analysis to the softening situation. The effect of softening on the collapse load of R/C frame is evaluated.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.762-767
• /
• 1999

This paper presents an experimental study on flexural behavior of damaged RC beams repaired with epoxy mortar system. The main test variables are repair length and depth. A series of 7 specimens was tested to show the corresponding effect of each variables on maximum load capacity, load-deflection relationship, and failure mode. The results of this study shows that flexural behavior of repaired RC beams changes as the repair length and depth is getting longer and deeper, so that the tension strength of repairing materials should be considered in the courses of repair design.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.365-368
• /
• 2006

In this paper, the post cracking stress-crack width relationship of the composite is studied from a micromechanics points of view. Cook-Gordon debonding effect is studied by more refined method with considering of chemical friction of fiber interface. As a result, fiber with pre-debonding length retards stress development and shows more wide crack width for the same force level. longer pre-debonding length and lower pre-debonding bond strength results in lower full-debonding force, but same crack width.

• Plant Resources
• /
• 제5권1호
• /
• pp.17-28
• /
• 2002

Palynological characters such as pollen grain polar axis length (PL), pollen equatorial diameter (ED), colpus length, colpus width, and P/E ratio of six species of Quercus subgenus Lepidobalanus Endl. from Korea were studied. A significant interspecific variation, unequal distances between the species, and various degree of intraspecific variations were found. The taxonomic value of the pollen morphology parameters measured was found to vary according to species. These results suggest a possible relationship between parameters measured and ploidy level of the Quercus species studied.

• 산업기술연구
• /
• 제27권B호
• /
• pp.71-75
• /
• 2007

A cylindrical pin fin with variable diameter is analyzed by using the one dimensional analytical method. Heat loss and fin efficiency are presented as a function of the fin diameter, length and convection characteristic numbers ratio. The relationship between the fin diameter and convection characteristic number over the fin for the same amount of heat loss is shown. One of the results indicates the fin efficiency increases as the fin diameter increases while that decreases as the fin length increases.

• 물과 미래
• /
• 제19권4호
• /
• pp.329-338
• /
• 1986

the purpose of this study is to estimate the storage deficit by Run's Characteristics of (-)Run-length and (-)Run-sum. Runoff data are obtained from the guaging stations of Y대-Ju in Hanriver Basin, Wae-Gwan in Nak Dong River Basin and Gyo Am in Geum River Basin. In order to estimate the storage deficit, runhydrographs are established with each return period of 10, 30, ......, 200 years and regression equation is derived from relationship between (-) run-length and storage deficit. From the comparison of estimated reservoir storage with observed values., it was proved that this suggested method can be used for the estimation of the storage deficit.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.157-158
• /
• 2017

This tests examined bond stress-slip relationship of V-ties embedded into concrete as a supplementary lateral reinforcement proposed for ductility of concrete flexural members. The different leg shapes of V-ties were prepared as a test parameter. The V-tie with pressed end-legs exhibited 28% higher bond strength than the conventional V-ties, whereas bond stress-slip curves were insignificantly affected by the embedment length of V-ties.

• Restorative Dentistry and Endodontics
• /
• 제29권5호
• /
• pp.413-422
• /
• 2004

Established microleakage tests have their own disadvantages. In this study, 3D reconstruction method was tried to overcome these disadvantages. Four types of microleakage tests were used and relationships among them were estimated: penetrated dye volume: marginal adaptability: degree of dye penetration and relative penetrated length to cavity wall. Twenty-four Class V cavities were bulk filled with composite (Esthet X) following surface treatments: N group (no treatment): E group (etching only): T group (etching + Prime & Bond NT). 50% silver nitrate was used as a dye solution after thermocycling ($5^{\circ}C{\;}&{\;}55^{\circ}C$, 1.000 times). Teeth were serially ground with a thickness of 0.2 mm. Volume of dye penetration was estimated from a three-dimensionally reconstructed image with a software (3D-DOCTOR). Percentage of margin without gap was estimated from SEM and degree of dye penetration and the relative length of dye penetration to overall cavity wall were also estimated. ANOVA and Scheffe test for dye volume, Kruskal-Wallis and Mann-Whitney test for marginal quality, Spearman's rho test for checking of relationships among methods were used. The results were as follows: 1. Dye penetration could be seen from several directions, furthermore, its volumetric estimation was possible. 2. Reverse relationship was found between dye volume and marginal quality (r = -0.881/ p = 0.004). 3. Very low relationship was seen between dye volume and two-dimensional tests (degree of dye penetration and relative length). However, 2D evaluation methods showed high relationship (p = 0.002-0.054) each other. 4. Three times vertical section could be recommended as a 2D test.

• 대한족부족관절학회지
• /
• 제11권2호
• /
• pp.182-186
• /
• 2007

Purpose: We examined the relationship of interdigital neuroma occurring site and the surrounding structures, including the deep transverse metatarsal ligament (DTML) by cadaver study and clinical results. Materials and Methods: Seventeen fresh frozen cadavers study were done to evaluate the relationship of interdigital neuroma occuring site and the DTML at two phase of the gait cycle with 60 degree of metatarsophalangeal dorsiflexion and with 15 degrees of ankle dorsiflexion. We measured the distance from interdigital nerve bifurcation of the common digital nerve to anterior margin of the DTML and longitudinal length of DTML itself. Clinically, we checked the location of interdigital neuroma and DTML length during surgery in 32 feet. Results: In the second and third web space, the mean distance from bifurcation of the common digital nerve of foot to the anterior margin of DTML was 16.7 mm, 15.1 mm in the mid-stance position, and 15.9 mm. 14.6 mm in heel-off position. Second, Third web space ligament itself length were average 12.8 mm, 10.6 mm. Clinically, all of the cases of interdigital neuroma started at the bifurcation area of the common digital nerve and interdigital neuroma was average 7.5 mm (range; 6-11 mm). Conclusion: Interdigital neuroma were located more distally than DTML in both the mid-stance and heel off stage. The main lesion was located between metatarsal head and metatarsophalangeal joint and more distal than the DTML anterior margin.

• Journal of Oral Medicine and Pain
• /
• 제39권4호
• /
• pp.133-139
• /
• 2014

Purpose: There have been reports regarding the various factors associated with the level of discomfort and recovery from neurosensory symptoms in patients with trigeminal nerve injury. However, the contributing factors remain uncertain and poorly understood. The purpose of this paper was to investigate the possible association between various factors expected to affect neurosensory discomfort and recovery in patients with mandibular nerve injury after dental implant surgery. Methods: Eighty-nine post-dental implant surgery patients with mandibular nerve injury were enrolled in this retrospective analysis. A medical records review of the patients was done to determine if the patients' improvement was related to pain intensity, the length of time between the injury and removal of the implant or the depth of penetration of the implant into the mandibular canal as determined by cone-beam computed tomography. Results: There was no significant linear relationship between pain intensity and symptomatic improvement (p=0.319). There was no significant linear relationship between the level of mandibular canal penetration and either pain intensity (p=0.588) or symptomatic improvement (p=0.760). There was a statistically significant linear relationship between length of time before the injury was treated, both with pain intensity (p=0.004), and symptomatic improvement (p=0.024). Conclusions: Our findings indicate that the length of time between nerve injury and initiation of conservative treatment is more closely related to the pain intensity and symptomatic improvement than other factors, including the level of mandibular canal invasion. Additionally, increased pain intensity and decreased symptomatic improvement can be expected over time, because of this linear trend. Therefore, although direct injury to the nerve is the most important factor contributing to a neurosensory disturbances, early neurosensory assessment and initiation of conservative treatment should be done to optimize recovery.