• 박물관과 연구
• /
• 제1권
• /
• pp.278-305
• /
• 2024

국립중앙박물관이 소장한 일제강점기의 유리건판 사진과 조선총독부박물관 공문서는 1950년 한국전쟁으로 북한 지역 소재 문화유산이 큰 피해를 입기 전의 모습을 알려주는 자료로서 가치가 있다. 이에 최근 유리건판과 총독부박물관 문서를 활용한 북한 지역 불교조각 연구가 증가하고 있으며, 본고에서는 황해도의 대표적 사찰 중 하나인 황주 성불사의 불교조각에 대해 기존 성과를 바탕으로 몇 가지 새로운 의견을 개진하였다. 이를 위해 먼저 문헌기록을 토대로 성불사의 연혁을 정리하고 현황을 짚어본 후, 유리건판 속 존상별 제작시기와 조성배경 등을 자세히 살펴봄으로써 성불사 불교조각을 종합적으로 이해하고자 했다. 1945년 해방 이전 성불사의 불교조각은 보살상 2건, 여래상 4건, 삼존상 1건의 총 7건이 확인된다. 제작시기에서는 고려 전기 2건, 고려 후기 1건, 조선 전기 3건, 조선 후기 1건의 분포를 보인다. 이 가운데 오늘날 실물이 남아있는 2건이 주목된다. 먼저 성불사 응진전에서 촬영되었다는 고려 전기 석조약사여래좌상이다. 이 상의 당시 대좌 실측도를 면밀히 검토한 결과, 현재 정방산 내금강 골짜기의 옛 상원암 터에 전하는 머리없는 석조약사여래좌상 및 대좌 부재와 일치함을 알 수 있었다. 이 판단이 맞다면 북한 지역에 전하는 고려 전기 불교조각의 작례를 새롭게 확보하는 것으로서 의의가 크다. 다른 하나는 성불사 극락전에서 발견된 조선 1454년(단종2) 작 금동아미타여래삼존좌상이다. 이 상은 현재 사리원력사박물관에 보관 중이며 조선 전기 이북 지역에서 확인되는 소형 금동불의 기년작으로서 중요하다. 본고는 성불사라는 단일 사찰에 초점을 맞추어 북한 지역 불교조각을 고찰한 사례 연구이다. 앞으로 국립중앙박물관 유리건판 자료가 더욱 다양한 방식으로 활용된다면 우리나라 불교조각사의 연구에 적지 않은 기여를 할 것으로 기대된다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 유통과학연구
• /
• 제8권3호
• /
• pp.17-26
• /
• 2010

세계경제 및 환경의 변화에 따라 농산물의 불안정적인 수급으로 인한 문제점이 노출되고 있으며, 우리나라의 경우 농산물의 안정적인 확보를 위하여 국가 전략적 차원에서의 해외농업투자의 필요성이 요구되고 있다. 하지만 정부차원의 지원 미진, 해외 농업에 대한 정보 및 기술 미비, 개발자금 확보의 어려움, 장기간의 투자금 회수기간, 사후관리 미흡 등의 이유로 성과를 이루지 못하고 있는 실정이며, 특히 해외 농산물의 국내 반입 시 관세의 장벽, 물류 유통비용 등으로 가격 경쟁력이 떨어지고 있어 국내에 반입되지 못하고 있는 실정이다. 이에 본 연구에서는 우리나라의 해외농업투자의 기본개념 및 실태를 살펴보고 해외농업투자의 필요성과 고려사항, 문제점 등을 도출하여 해외에서 재배된 농산물의 경쟁력을 위한 유통 측면에서의 개선방안을 정부의 간접적인 지원, 유통 현대화 및 유통정보기능 강화, 유통시설, 수송루트, 하역업무개선, 경쟁력 확보를 위한 정부의 정책적 지원, 교육 훈련을 통한 전문인력 양성 등 다섯 가지 측면에서 제시하였다.

• 치위생과학회지
• /
• 제5권4호
• /
• pp.211-220
• /
• 2005

서울, 경기, 인천 지역을 중심으로 치과코디네이터가 근무하는 치과병 의원 선정하여 현직 치과코디네이터들을 대상으로 치과코디네이터의 업무수행 정도와 인식도를 조사하여, 보다 효율적인 인력활용 방안을 마련하는 기초를 제공하고자 2005년 5월 1일부터 8월 8일까지 설문지를 통하여 자료를 수집한 후 회수된 108부를 분석한 결과는 다음과 같다. 1. 응답한 치과코디네이터들의 치과근무기간은 5년 이상이 43.5%, 2년 미만이 19.5%, 3년 이상 5년 미만이 19.4%의 순으로 나타났고, 치과코디네이터로서의 업무기간은 2년 미만이 39.8%, 2년 이상 3년 미만과 5년 이상이 각 19.4%의 순으로 나타났다. 그리고 현재 불리워지는 명칭으로는 실장(팀장)이 38%, 코디네이터가 30.6%이었으며, 치과코디네이터로 담당하는 세부 업무로는 리셉션이 30.6%로 가장 높았고, 소속된 부서는 진료지원팀이 57.4%로 가장 높게 나타났다. 2. 교육관련 사항으로는 치과코디네이터가 되기 위해 가장 많이 교육을 받은 기관으로는 45.4%가 사설기관이고, 응답자의 73.1%가 공인된 치과코디네이터 자격시험이 필요하다고 응답하였다. 또한 자격인정을 위한 적절한 공인기관으로는 중앙부처라고 응답한 율이 43.5%로 가장 높았고, 응답자의 70.8%는 이수한 업무교육 내용이 직무수행에 적합했다고 응답하였다. 치과코디네이터 업무능력 향상을 위한 지속교육 필요 여부는 96.3%가 "예"라고 응답하였고, 그 이유는 능력향상을 위해서가 63.9%, 체계적인 교육을 위해서가 22.2였다. 교육비 부담은 근무기관에서 총 교육비의 일정액 보조가 29.6%, 전액 자비 부담이 25.9%였다. 치과코디네이터 교육과정 중 필수 이수항목에서는 의료서비스 마케팅이 66.7%, 치과코디네이터 이론과 실무가 65.7%, 치과의료기초 57.4%의 순이었고, 보완을 희망하는 교육항목은 치과의료서비스 마케팅이 46.3%, 건강보험실무가 35.2%였다. 3. 치과코디네이터로서 현재 수행하는 업무는 고객관리 분야에서는 예약관리가 88.9%, 자기관리 분야에서는 서비스기본매너 갖추기가 87.9%, 원무관리 분야에서는 수납이 81.3%로 높게 나타났다. 4. 치과코디네이터의 수행업무에 대한 인식으로는 '현재 수행하고 있는 직종에 자부심을 가지고 있다($3.99{\pm}0.76$)', '치과코디네이터 업무는 경영 기여도가 높다고 생각한다($3.92{\pm}0.70$)', '내가 수행하는 업무는 전체 치과병 의원 업무에서 차지하는 비중이 크다($3.91{\pm}0.84$)', '나는 직원들과 직급에 관계없이 잘 지낸다($3.86{\pm}0.74$)', '업무를 통하여 환자의 구강건강 증진에 많은 도움이 되고 있다고 생각한다($3.76{\pm}0.75$)', '내 직업은 미래 전망이 밝다($3.74{\pm}0.86$)' 순으로 높게 나타났다. 5. 치과코디네이터의 연령별로 인식을 살펴보면 대체적으로 모든 항목에서 연령이 높을수록 업무에 대한 인식도가 높은 것으로 나타났고, '내가 수행하는 업무는 전체 치과병 의원업무 차지하는 비중이 크다'(P < 0.001), '수행하는 업무에 대하여 경영자의 인정과 신뢰를 받는다'(P < 0.01), '현재 수행하고 있는 직종에 자부심을 가지고 있다', '내 직업에 대한 사회적 인지도가 높다', '스텝들은 치과코디네이터들이 하는 일에 대해 이해하고 인정한다', '치과의사들은 치과코디네이터들이 하는 일에 대해 이해하고 인정한다', '현재 불리워지는 직명에 만족한다', '내 직업은 나이의 제한을 받지 않는다고 생각한다', '치과 코디네이터 업무는 경영 기여도가 높다고 생각한다'(P < 0.05)의 항목에서는 연령별로 통계적 유의성이 유의한 차이를 보였다. 6. 치과코디네이터의 직종별로 업무에 대한 인식을 살펴보면 대부분의 항목에서 치과위생사, 간호조무사, 기타 순으로 업무에 대한 만족도가 높은 것으로 나타났다. 그리고 '업무를 수행함에 있어서 업무관련 결정을 내가 하고 있다'(P < 0.001), ' 내가 수행하는 업무는 전체 병원업무에서 차지하는 비중이 크다', '내 업무는 나의 능력을 향상시켜 준다', '업무를 통하여 환자의 구강건강건강 증진에 많은 도움이 되고 있다고 생각한다', '현재 받고 있는 보수에 만족한다', '스텝들은 치과코디네이터들이 하는 일에 대해 이해하고 인정한다'(P < 0.01), '내 직업에 대한 사회적 인지도가 높다', '업무 수행시 스텝과의 갈등이 없다', '치과병 의원에서는 치과코디네이터의 능력향상을 위한 자기개발 기회를 주고 있다'(P < 0.05)의 항목에서 통계적으로 유의한 차이를 보였다.

• 대한가정학회지
• /
• 제19권3호
• /
• pp.83-101
• /
• 1981

Under the full consideration of the growing need and importance of population education in the field of home economics in Korea, the study was carried out to verify and assess the following facts on the current issues of population education of home economists who are presently engaging in teaching professions as the teachers of middle and high school and professors of college and universities by setting its primary objectives of the study as followings; 1) to assess the degree of general knowledge and attitudes of home economists toward population education in the field of home economics, 2) to verify the problems encountered in implementing population education by home economists in its field, 3) to find an existing status of previous trainings received and other activities of population education of home economists aimed at utilizing these findings as a part of reference materials when the population education is conducted in the field of home economics. In order to attain these objectives described above, the questionnaire was carefully designed to house a total of 40 questions with good combination of multiple-choice and the simple answer questions. The mail questionnaire survey was conducted by establishing teachers of home economics at middle/high schools and college/universities as Senior Home Economists(SHE) who are from public, private liberal arts and vocational schools. The rate of response observed during the survey was 45.6 percent and the findings of the survey research are as follows: 1) Examining the status of the respondents by residence and religion, it was found that 45 percent of middle & high school teachers ar.d 59. 1 percent of college professors are residing in Seoul city area and that the largest percent of them are christian in their religion. Analyzing respondents by their ages, 56 percent of middle/high school teachers are in their 30s, 45 percent of college professors are in their 40s, and 37 percent of college teachers are in their 30s. In addition, 13 percent of the total respondents are found to be unmarried. The study also revealed that 71 percent of the college professors finished Master Degree course and 82 percent of middle/high school teachers are graduated from college level lasting 4 years. Looking over the status cf major fields of respondents, 68.4 percent of middle/high school teachers are specialized in home economic education and the college professors, on the other hand, show relatively even prortion by specializing in the order of food & nutrition science, clothes & textile science and home managerial science. As far as the length of teaching experience is concerned, a relatively longer period of teaching experience is observed in the college professors in comparison with that of middle/high school teachers. In other words, 33.3 percent of middle/high school teachers are experienced in teaching from 6 to 10 years on average while 43.9 percent of college professors show more than 16 years of experience. 2) Examining the status of existing number of children cf the respondents, one boy and one daughter pattern is predominant, showing 28.5 percent in middle/high school teachers and 21.1 percent in college professors. As for the desired number of children of unmarried respondents, it is observed that 43.8 percent of middle/high school teachers desire to have one boy and one girl, and 31.3 percent of college professors want to have one child regardless of the sex. By assessing the degree of awareness of the population education through their students, it is observed that 53 percent of middle/high school teachers and 50 percent of college professors are aware of population education in some extent and that a majority of respondents took the positive attitudes toward an inclusion of family planning components into the formal school education. Another noteworthy to observe is that a total of 84.8 percent out of middle/high school teachers pointed that the population education currently conducted at schools as a part of home economics are less sufficient than it should be. 3) Analyzing the tendency as to whether the respondents were experienced in receiving population education during the time when they were students, 75 percent of college professors and 59 percent of middle/high school teachers responded negative answers in the survey. In the mean time, a total of 50 percent of the respondents replied that they began to acknowledge the importance of population education mainly through the participation of some sort of population-education orientend seminars, experienced by 40 percent of college professors and 80 percent of middle/high school teachers. 4) What it calls attention in this study was to find that 96.5 percent of middle/high school teachers and 72 percent of college professors conduct population education to some extent during their lecture hours and that more than 80 percent of them are never experienced in teaching population and family planning contents in their regular classes. It is, on the other hand, found that no more than once was the response of those who believe themselves that they are experienced in teaching these relevant components to their students. Analyzing the contents of the subjects being taught in the class, a large percent of them are found to be consisted of population and family planning contents. According to this study, the current population education through the formal school is quite inactive. Analyzing the facts, 44.9 percent of the college professors responded that the population and family planning components are quite apart from their specialization which eventually generates lack of interest in the field. 5) It is also noticed through the study that the degree of frequency of commenting on population and family planning contents during the classes was depending significantly on their specializations which means that the degree of frequency varies from a major to another. Those who majored in home managerial science was the first one, as compared to others who majored in different specializations. Glancing over the status of correlations between ages of the respondents and numbers of seminar paticipation, it is quite clear that the aged group participated more than the younger group did, and that the most highest number of participations made by college professors were those who are in 50s. In addition, it is also found that those who are aged 20s and 60s of the respondents were the group who comments least on the contents of population and family planning at their classes. The suggestions and recommendation made through this survey research are as follows. 1) No one denies that the rapid increase of population, as compared to the limited size of land and resources, will certainly affect adversly to an enhancement of individual life quality which will, eventually, bring forth the poverty of the nation. This is the reasson why we are insisting that the world population be controlled up to an optimum level with a matter of global concerns. It is our understading that the primary aim for reducing number of population is believed to be attained only by conducting the systematic and comprehensive population education through the formal schools. Therefore, the role of home economists in the field of population/family planning education is considered very importment due to the fact that an ultimate goal of population education is placed in elevating the quality of family life by having optimum number of children through family planning program. 2) It is quite clear that home economists as teachers of formal school in all level are invited to pay their attention on redefining the ultimate goal of education and that of population education. We also understant that the primary objective of population education is to change the norm and value of the clients by replenishing the students with pertinent knowledge and attitudes on population and its related problems through a sort of education in order to attain the ultimate goal for enhancing the quality of life. There is no exception in the theory of home economics. An altimate goal of home economics is to elevate the general quality of life through an establishment of value existed in daily life. Considering the relations between population education and home economics, it is quite indespensable to bandle population components as an integral part in the field of home economics. We believe, therefore, that the senior home economists positive participation in the effort population control is more needed than it has been. 3) It is also strongly urged that population education should be a part of instructor training course for home economics. In other words, the teacher of home economics should be well aware of population and its problems by teaching interrelationship between population education and home economics, needs, contents and methods of population education during the instructor training courese for home economics. In addition, the senior home economists should be encouraged through positive participation on the short term training by types of domestic and international seminar, workshop, etc. 4) We certainly believe that the population education can not sustain itself without any backing-up of information and findings' of various and comprehensive researches of natural and social sciences. Accordingly, every senior home economist is invited to exert their maximum effort to conduct systematic study with an aim to utilize these findings and information at best in population education in the field of home economics. Therefore, we consider that the development of training material is imminent in order to provide effective and efficient population education through the for training of home economies. It should be noted that these training materials must be carefully designed, tailored and developed to meet the different classes of trainees under the considerations as to whether it is easily adaptable and infusable into the curricula of every field of home economics, and it is acceptable in the degree of difficulty and quality in its contents. 5) It is true that there are many domestic and international research rapers, reports and findings in the field of population education and family planning. However, there is a tendency that the most of research papers are heavily relying on the authors intension and preferences in its expression and publication. Under these circumstances, it is urged that the home economists should aware of the growing need of the technical training in order to keep these available information and research findings reprocessed and redesigned to insure the practical application into the population education in the field of home economics in Korea.

• 한국기록관리학회지
• /
• 제5권2호
• /
• pp.27-48
• /
• 2005

이 논문은 한국의 세계기록유산에 대하여 먼저 그 의미와 가치를 재확인하고, 이들 세계기록유산에 대한 보존 관리 및 그 현황을 조사하며, 한국의 기록유산을 디지털화 하는데 있어서의 문제점과 해결책을 모색하고, 추후 한국의 기록유산 중 세계기록유산으로 등록되기를 희망하는 4종의 기록물들에 대한 가치와 의의를 고찰한 연구이다. 본 연구의 상세 사항은 다음과 같다. 첫째, 제2장에서는 한국의 세계기록유산에 대한 가치와 의의를 고찰하였다. 먼저 세계기록유산의 선정기준과 절차 등을 먼저 파악하고, 한국의 세계기록유산인 "훈민정음" "조선왕조실록" "승정원일기" "직지(백운화상초록불조직지심체요절(白雲和尙抄錄佛祖直指心體要節))"에 대하여 각각 그 가치와 의미를 분석하였다. 둘째, 제3장에서는 '한국의 세계기록유산 보존 관리 현황'에서는 세계기록유산을 보존하고 있는 <서울대학교 규장각> <국가기록원 부산기록정보센터> <간송미술관>의 기관별로 그 보존 관리 현황을 고찰하였다. 그 결과, 이 3기관 모두 세계기록유산 보존 관리 현황은 '매우 우수하다'고 평가할 수 있었다. 즉, 1)그 세부적인 보안대책이 완벽하다. 2)그 보존방법에 있어서도 항온 항습의 특별한 서고를 별도로 마련하고, 이 서고 내에서 다시 '오동나무 상자 서장(書欌)'을 설치한 후, 이들 상자와 서장 속에 세계기록유산을 납입하여 보존하고 있다. 3)방화장치와 서고조명 및 소독 등에도 철저를 기하고 있음 등을 파악하였다. 셋째, 제4장에서는 '한국의 기록유산 디지털화 과제'에 대하여 개괄적으로 고찰하였다. 그 결과, 한국 기록유산의 디지털작업 및 DB구축에서 '디지털화 표준'이 가장 중요한 문제이며, 이 문제의 해결을 위해서는 디지털화(Digitization)에 대한 총체적이고 표준적인 시스템의 개발이 시급함을 지적하였다. 그리고 국가기록관리시스템을 개발한 경험이 있는 <국가기록원>과 한국학 고기록물의 디지털화에 많은 관심을 가진 <문화재청>이 공동으로 노력하여, 한국학 관련 기록유산의 디지타이제이션(Digitization)에 대한 총체적이고 표준적인 시스템의 개발이 요구됨을 파악하였다. 넷째, 제5장 '세계기록유산 등록을 추후 희망하는 한국의 기록유산'에서는 한민족의 기록유산 중에서 차후 세계기록유산으로 등재되기를 희망하는 4종 즉, 1)<해인사 고려대장경 경판>, 2)"동의보감", 3)"삼국유사", 4)"무구정광대다라니경"의 기록물에 국한하여, 그 어떤 의미에서 세계적인 가치와 의의가 있는가를 고찰하였다.

• 지능정보연구
• /
• 제19권3호
• /
• pp.1-23
• /
• 2013

융합 R&D가 추구해야 할 바람직한 방향은 이종 기술 간의 결합에 의한 맹목적인 신기술 창출이 아니라, 당면한 주요 문제를 해결함으로써 사회적 니즈를 충족시킬 수 있는 기술을 개발하는 것이다. 이와 같은 사회문제 해결형 기술 R&D를 촉진하기 위해서는 우선 우리 사회에서 주요 쟁점이 되고 있는 문제들을 선별해야 한다. 그런데 우선적이고 중요한 사회문제를 분별하기 위해 전문가 설문조사나 여론조사 등 기존의 사회과학 방법론을 사용하는 것은 참여자의 선입견이 개입될 수 있고 비용이 많이 소요된다는 한계를 지닌다. 기존의 사회과학 방법론이 지닌 문제점을 보완하기 위하여 본 논문에서는 사회적 이슈를 다루고 있는 대용량의 뉴스기사를 수집하고 통계적인 기법을 통하여 사회문제를 나타내는 키워드를 추출하는 시스템의 개발을 제안한다. 2009년부터 최근까지 3년 동안 10개 주요 언론사에서 생산한 약 백 30만 건의 뉴스기사에서 사회문제를 다루는 기사를 식별하고, 한글 형태소 분석, 확률기반의 토픽 모델링을 통해 사회문제 키워드를 추출한다. 또한 키워드만으로는 정확한 사회문제를 파악하기 쉽지 않기 때문에 사회문제와 연관된 키워드와 문장을 찾아서 연결하는 매칭 알고리즘을 제안하다. 마지막으로 사회문제 키워드 비주얼라이제이션 시스템을 통해 시계열에 따른 사회문제 키워드를 일목요연하게 보여줌으로써 사회문제를 쉽게 파악할 수 있도록 하였다. 특히 본 논문에서는 생성확률모델 기반의 새로운 매칭 알고리즘을 제안한다. 대용량 뉴스기사로부터 Latent Dirichlet Allocation(LDA)와 같은 토픽 모델 방법론을 사용하여 자동으로 토픽 클러스터 세트를 추출할 수 있다. 각 토픽 클러스터는 연관성 있는 단어들과 확률값으로 구성된다. 그리고 도메인 전문가는 토픽 클러스터를 분석하여, 각 토픽 클러스터의 레이블을 결정하게 된다. 이를 테면, 토픽 1 = {(실업, 0.4), (해고, 0.3), (회사, 0.3)}에서 토픽 단어들은 실업문제와 관련있으며, 도메인 전문가는 토픽 1을 실업문제로 레이블링 하게 되고, 이러한 토픽 레이블은 사회문제 키워드로 정의한다. 그러나 이와 같이 자동으로 생성된 사회문제 키워드를 분석하여 현재 우리 사회에서 어떤 문제가 발생하고 있고, 시급히 해결해야 될 문제가 무엇인지를 파악하기란 쉽지 않다. 따라서 제안된 매칭 알고리즘을 사용하여 사회문제 키워드를 요약(summarization)하는 방법론을 제시한다. 우선, 각 뉴스기사를 문단(paragraph) 단위로 세그먼트 하여 뉴스기사 대신에 문단 세트(A set of paragraphs)를 가지게 된다. 매칭 알고리즘은 각 토픽 클러스터에 대한 각 문단의 확률값을 측정하게된다. 이때 토픽 클러스터의 단어들과 확률값을 이용하여 토픽과 문단이 얼마나 연관성이 있는지를 계산하게 된다. 이러한 과정을 통해 각 토픽은 가장 연관성이 있는 문단들을 매칭할 수 있게 된다. 이러한 매칭 프로세스를 통해 사회문제 키워드와 연관된 문단들을 검토함으로써 실제 우리 사회에서 해당 사회문제 키워드와 관련해서 구체적으로 어떤 사건과 이슈가 발생하는 지를 쉽게 파악할 수 있게 된다. 또한 매칭 프로세스와 더불어 사회문제 키워드 가시화를 통해 사회문제 수요를 파악하려는 전문가들은 웹 브라우저를 통해 편리하게 특정 시간에 발생한 사회문제가 무엇이며, 구체적인 내용은 무엇인지를 파악할 수 있으며, 시간 순서에 따른 사회이슈의 변동 추이와 그 원인을 알 수 있게 된다. 개발된 시스템을 통해 최근 3년 동안 국내에서 발생했던 다양한 사회문제들을 파악하였고 개발된 알고리즘에 대한 평가를 수행하였다(본 논문에서 제안한 프로토타입 시스템은 http://dslab.snu.ac.kr/demo.html에서 이용 가능함. 단, 구글크롬, IE8.0 이상 웹 브라우저 사용 권장).

• 항공우주정책ㆍ법학회지
• /
• 제18권
• /
• pp.135-183
• /
• 2003

1957년 이래 1999년 8월까지 약 313회의 우주발사 실패가 있었다. NASA의 '우주수송을 발전시킨다'라는 목표하에서, 제6의 목적은 우주선의 사고발생위험을 10년내에 1/40으로, 25년내에 1/140으로 낮춘다는 것이다. 이는 곧 우주개발이 아직도 얼마나 위험한 것인가를 보여주는 통계자료이다. 왜 이렇게 위험한 우주여행을 감수하면서, 우주개발에 뛰어드는 것인가? 우주개발은 경제적인 측면에서 인공위성을 이용한 통신 및 방송산업은 21세기 초에이룩될 우주산업의 가장 큰 분야가 될 전망이다. 특히, 우주의 특수한 환경인 무중력상태와 지구상보다 1,000 배나 높은 진공상태를 이용한 새로운 반도체의 개발 및 생산 그리고 신약의 개발 등이 활발하게 이루어질 것인데, 지난 1986년부터 지난달까지 운용되던 러시아의 "미르" 우주정거장에서는 수정을 생산하여 판매 하였다. 현재 우주산업은 미국, EU, 일본 등 소수 선진국들이 주도하고 있으며, 세계우주산업 시장규모는 년 평균 10% 이상 지속적인 신장이 이루어질 것으로 전망하고 있으며, 특히 민간용 이동통신산업 확대, 우주탐사활동 증대, 우주정거장사업 추진등으로 우주산업 규모는 비약적으로 신장할 것으로 예측되며, 최근 5년간 ED와 일본은 연평균 15${\sim}$20 %의 고성장을 유지하고 있다. 미국 NASA가 1993년 가을부터 1996년 10월까지 3년동안 민간기업에 기술을 이전한 결과를 보면, 거시적 안목을 가지고 우주산업을 추진해야 함을 알 수 있다. NASA는 미국 전역에서 16,300개의 일자리를 창출하였으며, NASA 의 기술 이전으로 새로 생긴 상품은 938개에 달하며, NASA가 민간에 이전한 기술을 경제적 가치로 환산하면 매년 16억 달러에 달하며, 또한 기술지원을 받은 미국기업을 5,600개가 넘는다. 또한, 경제외적인 측면에서 국가의 안보, 자주국방을 위한 정보수집을 위해 결정적인 역할을 한다. 우리나라는 외국에서 발사한 7개의 위성을 운영하고 있으며, '03년 8월 8일 고흥 외나로도에 인공위성발사장 기공식을 함으로써, 국내우주개발계획에 박차를 가하고 았다. 이러한 국가적인 우주개발계획과 함께 공군의 우주력건설에 따른 고찰이 필요하다. 우리나라는 미국과의 MTCR 협의로 인하여, 사정거리 300km 이상의 미사일발사체를 개발하지 않도록 되어 있으므로, 현실적으로 국방부(공군) 자체에서 우주발사체를 개발하는 것은 어렵다. 현대전에서 항공우주력은 곧 전쟁의 승패를 결정하는 필수적인 요소이며, 이미 전장이 우주로 화대되어 있는 현실에 있어서, 군의 우주력건설은 '우주력건설의 당위성'을 논할 때가 아니고, '어떻게 군의 우주력건설'을 하여야 하는 가 '우주력건설의 방법론'에 대한 구체적인 연구가 되어야 할 때이다. 우주의 군사적이용에 대한 제한은 미국의 주장대로 "비침략적 이용(non-aggressive use)"이 옳은 판단이며, 구소련의 "비군사적 이용(non-military)"에 대한 주장은 옳지 않다. 이러한 구 소련의 주장은 러시아정부에서는 적극적으로 주장하고 있지도 않고 현실성도 없는 주장이다. 따라서, 미국의 우주의 평화적 이용에 대한 개념에 의하면, 다목적위성의 군정찰목적으로의 이용이나, 상업위성의 군통신 이용은 자유롭다고 할 것이다. 즉, 공군은 군정찰위성, 통신위성 개발을 민간연구부서와 자유롭게 할 수 있다고 본다, 다만, 미국과의 MTCR 협정상 우주발사체 개발에 대해서는 제한을 받고 있으나, 우주발사체개발은 한국항공우주연구원에 위임하고, 궤도에 있는 위성을 운용하면 문제가 없다고 본다. 다목적위성은 주 임무가 Remote Sensing 인데 High resolution 특히 SAR 센서는 주로 군사목적으로 이용되고 있다. 따라서, 다목적위성은 공군과 한국항공우주연구원, 국방과학연구소간의 공동으로 연구개발을 할 수 있는 제도가 마련되어야 한다. 미 공군도 현재 사용 중인 발사체를 단계적으로 제거하며 기업 발사체 이용을 증가시킨다. 또한, 군 통신의 특수성 때문에 민수용 통신 및 방송 서비스와는 독립적으로 운영되어 왔으나 군 통신 중계기와 민간 통신 중계기가 혼합되어 운용됨으로써 군 위성 통신의 단독에서 오는 경제적인 부담을 줄이기 위한 방안으로 각광을 받고 있다. 걸프전에서도 미국은 상용통신위성을 군 통신에 사용하였다. 우리나라의 우주과학기술 연구에의 착수는 다른 나라들과의 경제적 개발 정도와 비교해 볼 때 늦었으며, 우주개발예산 또한 상대적으로 일본은 2조원/년인데 비하여 우리는 5조원/15년으로 부족하다. 우주산업은 산업의 특성상 초기 육성기간은 산업체 수익사업으로 전개될 수 없으므로, 정부예산에 의한 사업추진이 불가피하다. 외국의 경우에도 우주개발 프로그램은 모두 정부사업이며, 최근 들어 통신 방송위성 등 극히 제한된 분야에 한해 민간사업이 추진되고 있을 뿐이다. 더욱이 우리나라와 같이 우주산업이 초창기에 있는 경우에는 이러한 필요성이 더욱 절박하며, 정부사업의 추진 시에도 정부지원예산의 회수를 전제로 하지 않는 정부출현 혹은 투자사업으로 추진되어야하는 것이 필수적 요소이다. 우주연구인력수준에 있어서도, 세계적으로 우주개발선전국들에 비하여 예산이 부족하며, 전문인력도 부족하다. 따라서, 국가 우주개발의 효율적이고 체계적인 추진과 사업 추진시의 힘의 분산 및 혼돈을 방지하기 위해서도 한국의 우주개발 체계에 대한 선명한 제시와 함께 국내 우주개발 관련 법령의 제정이 시급하다. 또한, 우리나라 우주개발은 각기다른 법령하에 각기 다른 주무부처에서 사업을 진행하고 있으므로, 국가적으로 집중적인 우주개발체제를 확립하는 것이 필요하다. 우주력건설을 위해서는 항공우주연구분야 즉 국방과학연구소와 한국항공우주연구원의 항공우주분야를 어떻게 협력 또는 통합하느냐에 대한 연구이전에, 우주력을 어떻게 운용할 것인가에 대한 근본적인 전략과 정책을 수립할 '우주작전본부'를 공군에 설립하는 것이 선과제이다.'우주작전본부'를 설립하기 위해서는 무엇보다도 국방부와 합참의 전략적인 의사결정이 필요하다. 특히, 일본의 군의 우주력건설에 대한 계획을 참고하여, 자주국방을 위한 최소한의 군사목적의 정찰위성, 통신위성, 우주감시체계의 확보가 필요하다. MTCR협정 등의 문제를 해결하기 위해서는 한국항공우주연구원의 발사체개발을 이용하고, 또한 다목적위성, 통신위성개발을 활용하기 위하여 국방예산을 확보하여야 하겠으며, 우선적으로 일본의 정찰위성 운용예산인 약 2조 5천억원정도의 우주예산을 국방부에서 먼저 확보할 필요가 있다.

• 한국유통학회지:유통연구
• /
• 제15권1호
• /
• pp.49-71
• /
• 2010

본 연구는 가맹사업자의 자기효능감에 주목하여 정부가 예비가맹사업자들을 보호하기 위해 가맹본부에 다양한 규제와 정책을 사용하는 것이 최선의 방법이 아니라는 것에 관심을 두고 있다. 본 연구에서는 경로-목표이론(path-goal theory)에서 제시한 가맹본부의 리더십 행동 유형과 가맹사업자의 관계결속의 영향관계에 있어서 가맹사업자의 특성으로 자기효능감의 조절효과를 규명하고, 실증 분석한 결과 다음과 같은 연구의 시사점을 발견할 수 있었다. 첫째, 가맹본부의 리더십 행동유형이 관계결속에 긍정적 효과를 가져 온다는 사실이 확인됨으로써 가맹본부는 가맹사업자에게 맞는 리더십 행동유형을 적용할 수 있도록 하여야 한다. 둘째, 가맹사업자의 자기효능감이 관계결속에 긍정적 효과가 있을 뿐만 아니라, 리더십 행동유형과 관계결속 사이에 상당한 조절효과가 있기 때문에 가맹본부는 가맹사업자들의 개인차(individual difference) 관리가 필요하다. 셋째, 정부는 가맹본부를 규제할 것만이 아니라 가맹본부가 가맹사업자들의 특성을 확실하게 파악하고 기업의 목표달성을 위한 정당한 통제가 가능하도록 제도적 지원을 해야 할 것이다.