• Title/Summary/Keyword: Reject

검색결과 602건 처리시간 0.033초

부상부유처리에 의한 국산 골판지 고지의 분급(I)

  • 류정용;지경락;여성국;신종호;송봉근
    • 한국펄프종이공학회:학술대회논문집
    • /
    • 한국펄프종이공학회 1999년도 추계학술발표논문집
    • /
    • pp.205-214
    • /
    • 1999
  • In order to investigate the influencing factors of flotation fractionation. flotations were performed at varied conditions. The selectivity of fines fractionation is mainly affected by long fibers flocculating degree and if it were not for sufficient flocculation of long fibers, increase of long fibers loss could not be avoided. The amount of flotation reject totally depends on the stability of forth floated on the stock surface. only the small size fines stabilize the froth as they hinder the drainage of liquid lamella in flotation-froth. Two important factors of flotation conditions are improving the flocculation of long fibers and increasing the amount of flotation reject. Changing a flotation flux or an air-mixing ratio with aims of increasing the flocculation of fibers and reject ratios is in conflict. In order to satisfy the both conditions for reducing long fiber loss and for increasing flotation reject a new fractionation promoter is urgently required.

  • PDF

마모기로 분쇄한 Reject Ash를 활용한 고강도 모르타르의 품질특성 (Quality properties of high compressive strength mortar that uses Reject ash ground by an abraser)

  • 문병룡;백철;이재진;박병문;한민철;한천구
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2016년도 추계 학술논문 발표대회
    • /
    • pp.45-46
    • /
    • 2016
  • As coal fly ash emissions have increased due to additional constructions of domestic heat power plants, the amount of embedded reject ash (Rj henceforth) is increasing as well. Most Rj is embedded, so if it is used as an alternative admixture instead of cement, embedded quantities will decrease, leading to economic and environmentally positive effects. Therefore this study conducted an experiment to contemplate the usability of Rj ground in the Los Angeles abraser, and what effects ground Rj has on the engineering properties of high compressive strength mortar. The result was that as the number of grinding turns increased, liquidity, air quantity and intensity were improved, proving Rj a possible alternative admixture to cement.

  • PDF

마모기로 분쇄한 Reject Ash가 빈배합 모르타르의 공학적 특성에 미치는 영향 (Quality Properties of Poor-mix mortar that uses reject ash ground by an abraser)

  • 문병룡;박용준;조만기;박병문;한민철;한천구
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2016년도 추계 학술논문 발표대회
    • /
    • pp.96-97
    • /
    • 2016
  • As coal fly ash emissions have increased due to additional constructions of domestic heat power plants, the amount of embedded reject ash (Rj henceforth) is increasing as well. Most Rj is embedded, so if it is used as an alternative admixture instead of cement, embedded quantities will decrease, leading to economic and environmentally positive effects. Therefore this study conducted an experiment to contemplate the usability of Rj ground in the Los Angeles abraser, and what effects ground Rj has on the engineering properties of poor-mix mortar. The result was that as the number of grinding turns increased, liquidity, air quantity and intensity were improved, proving Rj a possible alternative admixture to cement.

  • PDF

A Monolithic 5 GHz Image Reject Mixer for Wireless LAN applications

  • Ho-Young Kim;Jae-Hyun Cho;Jung-Ho Park
    • 한국통신학회논문지
    • /
    • 제26권12B호
    • /
    • pp.1733-1740
    • /
    • 2001
  • A monolithic 5 GHz image reject mixer using a 0.5-m GaAs MESFET technology is designed and simulated. The Mixer exhibits a 13.56 dB down-conversion gain, a SSB (Single SideBand) noise figure of 11.91 dB, an input IP3 (third order intercept point) of -3.73 dBm and a PldB (1-dB compression point) of -11.0 dBm. The critical issue in the image reject mixer is the phase accuracy and magnitude balance of the 90 phase shifting network. The proposed image reject mixer realizes a 90 phase shifter on chip. This phase shifting network does not need any phase adjusting to achieve the phase error specification of 3 over a frequency range from 800 MHz to 1GHz. The simulated overall image rejection ratio is better than 50 dB.

  • PDF

An Algorithm for Support Vector Machines with a Reject Option Using Bundle Method

  • Choi, Ho-Sik;Kim, Yong-Dai;Han, Sang-Tae;Kang, Hyun-Cheol
    • Communications for Statistical Applications and Methods
    • /
    • 제16권6호
    • /
    • pp.997-1004
    • /
    • 2009
  • A standard approach is to classify all of future observations. In some cases, however, it would be desirable to defer a decision in particular for observations which are hard to classify. That is, it would be better to take more advanced tests rather than to make a decision right away. This motivates a classifier with a reject option that reports a warning for those observations that are hard to classify. In this paper, we present the method which gives efficient computation with a reject option. Some numerical results show strong potential of the propose method.

석탄 잔사회 및 바닥재가 포함된 인공경량골재의 발포특성에 미치는 활성탄소의 영향 (Effect of activated carbon on bloating properties of artificial lightweight aggregates containing coal reject ash and bottom ash)

  • 강민아;강승구
    • 한국결정성장학회지
    • /
    • 제23권4호
    • /
    • pp.201-206
    • /
    • 2013
  • 화력발전소에서 배출되는 석탄 바닥재 및 잔사회는 재활용이 힘든 폐자원이어서 주로 매립 처분되고 있다. 본 연구에서는 국내 화력발전소에서 배출된 석탄 잔사회, 바닥재 그리고 준설토를 혼합하여 인공골재를 제조하고, 실험인자가 골재의 발포거동 및 물성에 미치는 영향을 분석하였다. 특히 미연탄소가 많이 포함되어 있는 잔사회에 대하여 하소 처리를 한 뒤, 인위적으로 활성탄소를 첨가함으로서 하소유무 및 활성탄소 첨가량이 인공골재의 발포특성에 미치는 영향을 조사하였다. 이를 위해 인공골재의 부피비중 및 흡수율 값을 시편의 미세구조 관찰 결과와 연계하여 고찰함으로서, 잔사회의 재활용율 제고에 일조하고자 하였다.

S 하수처리장 반류수가 방류수 수질에 미치는 영향 (The Effect of Reject Water on the Water Quality of Effluent from S Sewage Treatment Plant)

  • 김미란;김경희;박해식;강동효;이제근
    • 한국환경과학회지
    • /
    • 제19권3호
    • /
    • pp.323-329
    • /
    • 2010
  • To acquire preliminary data for the control of total nitrogen (TN) in S sewage treatment plant, which processes merging food waste and sewage, the effect of reject water on the total nitrogen in the effluent was examined in this study. Water quality data for the plant during the winter period were applied to calculate the mass balance. It was calculated that at least more than 231 kg/d TN should be removed to control the TN concentration in the effluent. Assuming 18 ppm as the goal TN concentration in the effluent, about 941 kg/d TN should be removed from this plant. Approximately 10% more TN should be removed than at present to achieve this result. It was observed that dewatering the filtrate had a considerably greater effect on the total nitrogen in the effluent than the reject waters. The dewatered filtrate contained 1,399kg/d TN. The contribution of the dewatered filtrate to the TN concentration in the effluent was 0.183, which was 7 to 23 times greater than the other reject waters. In addition, the amount of total nitrogen from the reject water, with the exception of the dewatering filtrate, was lower than the amount of TN that should be removed from S sewage treatment plant. Therefore, it was concluded that one of the most effective methods for controlling the TN concentration in effluent was the removal of the TN contained in the dewatering filtrate.

Gain and Phase Mismatch Calibration Technique in Image-Reject RF Receiver

  • Lee, Mi-Young;Yoo, Chang-Sik
    • Journal of electromagnetic engineering and science
    • /
    • 제10권1호
    • /
    • pp.25-27
    • /
    • 2010
  • This paper presents a gain and phase mismatch calibration technique for an image-reject RF receiver. The gain mismatch is calibrated by directly measuring the output signal amplitudes of two signal paths. The phase mismatch is calibrated by measuring the output amplitude of the final IF output at the image band. The calibration of the gain and phase mismatch is performed at power-up, and the normal operation of the RF receiver does not interfere with the mismatch calibration circuit. To verify the proposed technique, a 2.4-GHz Weaver image-reject receiver with the gain and phase mismatch calibration circuit is implemented in a 0.18-${\mu}m$ CMOS technology. The overall receiver achieves a voltage gain of 45 dB and a noise figure of 4.8 dB. The image rejection ratio(IRR) is improved from 31 dB to 59.76 dB even with 1 dB and $5^{\circ}$ mismatch in gain and phase, respectively.

유아의 행복에 대한 유아의 정서성과 어머니의 우울 및 양육행동의 영향 (Child's Happiness: Effects of Emotionality, Mother's Depression and Parenting Behaviors)

  • 권연희
    • 한국생활과학회지
    • /
    • 제22권4호
    • /
    • pp.525-537
    • /
    • 2013
  • This study investigated the relations among a child's emotionality, mother's depression and parenting behaviors in predicting a child's happiness. Participants were 384 children(175 boys, 209 girls) and their mothers. The teachers completed the rating scale to measure a child's happiness. A child's emotionality, mother's depression and parenting behaviors were assessed by a mother-reported questionnaire. The collected data was analyzed using descriptive statistics, correlations, and hierarchical multiple regressions. Results showed that child's emotionality was negatively related to their happiness. Mother's depression had a negative relation to child's happiness. Mother's warmth-encouragement, overprotection-permission, and reject-nonintervention was significantly related to a child's happiness. Hierarchical regression analysis indicated that the interaction of child's emotionality and mother's reject-nonintervention predicted child's happiness. Child's emotionality, whose mother demonstrated a higher level of reject-nonintervention, was associated significantly with happiness. In addition, the association between mother's depression and child's happiness was mediated by mother's warmth-encouragement and reject-nonintervention. Results suggest the importance of mother's role in the context of intervention planning for child's happiness.

A Study on the Manufacturing of Energetically-Modified Reject Fly Ash and the Characteristics of Mortar

  • Jeong, Jae Hyun;Chu, Yong Sik;Yi, Chong Ku;Seo, Sung Kwan;Kwon, Duk Young
    • 한국세라믹학회지
    • /
    • 제53권2호
    • /
    • pp.234-240
    • /
    • 2016
  • Energetically-modified material using reject fly ash (RFA), generated from thermal power plants, was manufactured to investigate the effect of the material on the physical and chemical characteristics of cement mortar. In order to modify reject fly ash, a vibration mill was used. Particle size, grain shape, and crystal structure of the ash were analyzed. Then, the compressive strength of the mortar using energetically-modified reject fly ash (ERFA) was measured. Microstructure and X-ray diffraction (XRD) patterns were also used in the analysis. As the replacement rate of ERFA increased, the value of the compressive strength tended to decrease. However, it was found that the compressive strength values of 7 and 28 days-cured specimens were higher than those of conventional ordinary Portland cement (OPC) mortar with 10 % replacement rate condition.