• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.5
• /
• pp.659-665
• /
• 2011

Recently, the plastic resin such as PC, ABS are widely used in IT market. Especially, in most cases the keypads mounted on the mobile phone are the dual-injection-plated type. Environmental regulation is based on the quality of injection-molded products and the minimum process steps are required to avoid the plating defects. Various parameters to produce the injection-molded plastic products make it difficult to obtain the desired stability. However, the past experience and the use of CAE analysis make it possible to predict the problems occurred in injection molding process. Especially, the problems of the weld lines such as runner balancing, bending, deformation and forming defects can be solved systematically and minimized by CAE analysis. Through this study, the non-uniform volumetric shrinkage and the difference in temperature distribution induce the deformation and the high value of stress causes the problems such as crack.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.876-878
• /
• 2008

The standards of acceptable limit and compensation is one of the most important things in environmental noise and vibration disputes resolution. In this paper, review on the present acceptable limit level and compensation standard in National Environmental Dispute Resolution Commission is introduced. Discordance of standards between in the regulation law and in the dispute resolution commission and it's improvement are discussed. Abnormal reasoning for compensation standards is pointed out from a author's private view.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.3
• /
• pp.185-194
• /
• 2014

Internal engine is the main power source of vehicle and is the main source of air pollution. To satisfy this getting rigorous emission regulation, it must be solved simultaneously the dilemma of reducing emission gas and increasing heat efficiency. Diesel engine is preferred compare with gasoline engine in aspect of energy consumption but it must be solved reducing the containing of NOx, CO and HC. In this study: 1. Looking for alternative of performance improvement of Exhaust Gas Recirculation(EGR) which is emission gas reduction system. 2. Reducing malfunction of controlling emission gas. 3. Made possible precision control.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1325-1329
• /
• 2007

Indoor air quality is an important determinant of human health and comfort. However, the complexity of pollution sources and the multitude of parties responsible for creating indoor exposures makes the improvement of air quality difficult. The HVAC(Heating, Ventilating and Air-Conditioning) system is important facility to provide comfortable environment passenger service. The Ministry of Environment is established "Indoor Air Quality Management guidelines in Public Facilities"in December 2006. Hereupon, the train and the subway are included. In this research air quality in the Subway compartment has been measured. As a result, the concentrations of PM10 and $CO_2$ were reached to 93% and 61% of the regulation values, respectively. Thus, the indoor air qualities of subway have been proved that they satisfy the recommended guidelines by the Ministry of Environment.

• Journal of Korean Society of Rural Planning
• /
• v.10 no.2 s.23
• /
• pp.25-34
• /
• 2004

The objectives of this study were to compare rural development of Korea and EU. According to its traits the peroids of rural development of Korea can be divided into low periods. According to its memberships and traits the periods of rural development of EU can be divided into low periods. There are many similarities between Korea and EU in agricultural situation and rural development. EU introduced multifunctionality of agriculture in 1980s and adopt strong policy to support that in 1990s. And EU made a effort sustainable rural development, integrated rural development and balanced regional development. Recently Korea not only maintain agricultural expanisionism but also pay attention to multifunctionality of agriculture. But rural development of Korea still in the stage of physical planning and agricultural expanisionism. So it leaves much room for improvement to rural development of Korea in rural development regulation, unifying theme, detail planning, integration among policies, balanced regional development, etc.

• Korean Security Journal
• /
• no.1
• /
• pp.135-173
• /
• 1997

We study on the power of local autonomous fire fighting in Korea. Chapter I which sets out purpose, scope and method, is followed by Chapter Ⅱ , dealing largely with the organization, man-power, equipment, activites of local fire fighting administration and the fire fighting environment. Chapter III made a comparative study on the power of autonomous fire fighting, local budget , fire fighting activities, fire present conditions. It is followed by concluding abservation made in Chapter Ⅳ and Chapter V. We indicated a few disputed points on the power of local autonomous fire fighting and suggested several alternatives to improve our fire fighting administration system. The alternatives suggested are as followes : (1) Reinforcement of the man-power, (2) Regulation of the standard fire fighting power, (3) Improvement of the using on fire fighting facilities tax and state finance, (4) Aplication of the local borrowings, (5) Tax reduction and exemption on the fire fighting equip-ment investment, and so forth.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.199-202
• /
• 1995

In the conventional $H_2$ design of PI controllers, the quadratic cost function includes only the plant output term and hence, the optimal controller often results in a very large plant input. In this paper, $H_{\infty}$ design methodology is combined with the conventional $H_2$ design to make a trade-off between the regulation of the plant input and the plant output in a systematic way.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.446-451
• /
• 1999

A study for the roundness of machining center is classified into two ways. one is the way that progresses the roundness amending the parameter of machining center based on the measured value after the measurement of the roundness of machining center by means of a existing measuring device, another is the way that measures the roundness by remodeling the existing measuring device. The former is studied by pack hei jae team in Seoul university, the latter is studied by TSUTSUMI. Especially TSUTSUMI measures the roundness according to circular compensation after the insertion of developed measuring desire using a rotary encoder to the spindle of machining tool. We study how regulation velocity occuring with circular motion of machining center table influences the roundness after measuring the roundness using Circular Test method by a 2 dimention probe and a standard discus in this experiment.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.13
• /
• pp.911-932
• /
• 2000

On increasing a computer network, internet usage, it has been created for Electronic Commerce to place a cyberspace. This cyberspace is limited to apply for contemporary usage and law because it have distinct characters now. Therefore, it is predicted that dispute will be happened in these cyberspaces. This article examines the disputes cases related the computer network intermediary's liability and studies a reasonable improvement ways for developing Electronic Commerce. It has been limited to apply the usage and law the network which can be happened a dispute and has not involved usage and law using computer network yet. Therefore, we should make a self-regulation each other who use network and improved the usage and law involved the network through these methods. We should also establish Alternative Dispute Resolution and try to settle dispute in the cyberspace

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.5
• /
• pp.482-488
• /
• 2009

Dancer system is typically used equipment for attenuation of tension disturbances. In industrial converting machines, a composite type of dancer system is applied which is mixture of active and passive dancer. It includes feedback position control loop of roll with pendulum dancer and its characteristics is different from passive and active one. In this paper, a mathematical model of the pendulum dancer was derived including PI position feedback controller and it was analyzed by using a pole-zero map and bode plot under various conditions. It was found out that velocity, length of span and inertia were associated with the performance of regulation. It was suggested that the length of upstream span should be greater than that of the downstream and the inertia should be smaller for improvement of the performance. The results can be used for design guidelines of the industrial dancer system.