• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2010년도 학술발표회
• /
• pp.2038-2042
• /
• 2010

본 연구는 동해안 속초항에 정방형 직교격자체계(Regular Grid)와 직교-곡선 격자체계(Orthogonal Curvilinear Grid)를 이용하여 SWAN 모형에 적용시켜 각 격자체계에 따른 파랑변형의 특성을 비교하는데 목적이 있다. 본 연구결과 북방파제가 연장 중인 방파제 선단에서 회절현상이 관측 되었으며, 속초 해수욕장 인근에서의 해안선 형상에 따라 굴절 효과로 인하여 입사 파랑의 벡터들이 해안선에 수직하게 입사되는 현상이 관측 되었고, 특히, 조도 주변에서 파랑의 굴절 효과와 차단효과를 관찰할 수 있다. 정방형 직교 격자체계와 직교-곡선 격자체계의 계산결과는 유사하나 직교-곡선 격자체계가 해안선에서 보다 정밀한 계산 값을 얻을 수 있었다. 하지만 직교-곡선 격자체계는 계산시간이 최소 4배 이상 증가하는 단점을 가지고 있다.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2005년도 춘계공동학술대회 발표논문
• /
• pp.835-841
• /
• 2005

실시간 가시화/시각화(Visualization)을 위한 지형 가시화 분야에서의 렌더링 속도 향상은 사용자의 현실감에 있어 중요한 역할을 한다. 본 연구는 Height Field 데이터를 사용한 블록 단위 지형 렌더링 방법에서 이전 프레임 정보를 사용하여 지형 가시화 속도를 향상시키는 방법을 제안한다. Height Field로 표현된 지형을 실시간에 효과적으로 렌더링 할 수 있는 방법으로CLOD(Continuous leveI Of Detail)가 있으며 대표적인 방법으로 Multiresolution TIN(Triangle Irregular Network)과 Regular Grid Method에 기반한 방법들이 있다. 대개의 경우, 지형 데이터는 매우 방대한 크기를 가지고 있어서 실시간으로 렌더링 하는 것이 불가능할 경우가 많다. 따라서 실시간 지형렌더링 에서는 LOD(Level of Detail)관리와 뷰 프러스텀 컬링이 실시간 렌더링 속도 향상을 위한 핵심 사항이 된다. 본 연구에서는 PC 기반에서 효과적으로 지형을 표현하기 위해 기존 Regular Grid Method에 기반한 방법의 가시영역 추출(View Frustum Culling)을 수정하여 실시간 지형 렌더링의 가시 영역 추출(View Frustum Culling)시 기존의 쿼드트리 방식과 함께 이전 프레임에서 블록 단위로 저장된 컬링 정보를 혼용하여 속도를 향상시키는 방법을 상세히 기술 한다.

• 대한조선학회논문집
• /
• 제51권5호
• /
• pp.419-428
• /
• 2014

This paper presents a numerical simulation method for the flow around advancing ships in regular waves by using a rectilinear grid system. Because the grid lines do not consist with body surface in the rectilinear grid system, the body geometries are defined by the interaction points of those grid lines and the body surface. For the satisfaction of body boundary conditions, no-slip and divergence free conditions are imposed on the body surface and body boundary cells, respectively. Meanwhile, free surface is defined with the modified marker density method. The pressure on the free surface is determined to make the pressure gradient terms of the governing equations continuous, and the velocity around the free surface is calculated with the pressure on the free surface. To validate the present numerical method, a vortex induced vibration (VIV) phenomenon and flows around an advancing Wigley III ship model in various regular waves are simulated, and the results are compared with existing and corresponding research data. Also, to check the applicability to practical ship model, flows around KRISO Container Ship (KCS) model advancing in calm water are numerically simulated. On the simulations, the trim and the sinkage are set free to compare the running attitude with some other experimental data. Moreover, flows around the KCS model in regular waves are also simulated.

• Kyungpook Mathematical Journal
• /
• 제60권2호
• /
• pp.349-359
• /
• 2020

We study perfect 2-colorings of regular graphs. In particular, we consider the 4-regular case. We obtain a characterization of perfect 2-colorings of toroidal grids.

• 한국공간구조학회논문집
• /
• 제15권2호
• /
• pp.87-94
• /
• 2015

This paper aimed at modeling a fine triangular grid for network dome by using Harmony Search (HS) algorithm. For this purpose, an optimization process to find a fine regular triangular mesh on the curved surface was proposed and the analysis program was developed. An objective function was consist of areas and edge's length of each triangular and its standard deviations, and design variables were subject to the upper and lower boundary which was calculated on the nodal connectivity. Triangular network dome model, which was initially consist of randomly irregular triangular mesh, was selected for the target example and the numerical result was analyzed in accordance with the HS parameters. From the analysis results of adopted model, the fitness function has been converged and the optimized triangular grid could be obtained from the initially distorted network dome example.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권2호
• /
• pp.206-218
• /
• 2014

The wave attenuation by floating breakwaters in high amplitude waves, which can lead to wave overtopping and breaking, is examined by numerical simulations. The governing equations, the Navier-Stokes equations and the continuity equation, are calculated in a fixed Cartesian grid system. The body boundaries are defined by the line segment connecting the points where the grid line and body surface meet. No-slip and divergence free conditions are satisfied at the body boundary cell. The nonlinear waves near the moving body is defined using the modified marker-density method. To verify the present numerical method, vortex induced vibration on an elastically mounted cylinder and free roll decay are numerically simulated and the results are compared with those reported in the literature. Using the present numerical method, the wave attenuations by three kinds of floating breakwaters are simulated numerically in a regular wave to compare the performance.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권3호
• /
• pp.277-300
• /
• 2016

The motion of a floating body and the free surface flow are the most important design considerations for ships and offshore platforms. In the present research, a numerical method is developed to simulate the motion of a floating body and the free surface using a fixed rectilinear grid system. The governing equations are the continuity equation and Naviere-Stokes equations. The boundary of a moving body is defined by the interaction points of the body surface and the centerline of a grid. To simulate the free surface the Modified Marker-Density method is implemented. Ships advancing in regular waves, the interaction of waves by a fixed circular cylinder array and the response amplitude operators of an offshore platform are simulated and the results are compared with published research data to check the applicability. The numerical method developed in this research gives results good enough for application to the initial design stage.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2004년도 봄 학술발표논문집 Vol.31 No.1 (A)
• /
• pp.955-957
• /
• 2004

DNA 마이크로어레이(microarray)란 새로운 개념의 기술이 도입되면서, 이를 이용하여 유전체(genome)를 탐색하거나, 동시에 수천 개의 유전자간의 상호작용을 관찰 할 수 있게 되었다. 이러한 이점으로 인하여, 많은 DNA 마이크로어레이 실험이 시행되고 있다. DNA 마이크로어레이 실험으로 생성되는 이미지 데이터는 그 양이 방대하고, 분석하는 연구자에 따라 판정이 달라질 수 있으므로, 이를 효율적으로 분석할 수 있는 방법들이 필요하게 되었다. 하지만, 마이크로어레이 이미지 데이터는 반점(Spot) 위치의 변동이나 반점의 모양, 크기가 고르지 않는 것과 칼은 다양한 문제로 인하여 자동적으로 분석하기는 어렵다. 본 논문에서는 마이크로어레이의 균일 격자(regular grid) 구조 탐색을 이용하여 새로운 주소 결정 알고리즘을 소개한다.

• 대한기계학회논문집B
• /
• 제24권6호
• /
• pp.814-821
• /
• 2000

The Discrete Ordinates Interpolation Method (DOIM) is tested in three-dimensional enclosures. The radiative transfer equation (RTE) is solved for a linear source term and the DOIM is formulated for a gray medium. Several interpolation methods can be applied to the DOIM scheme. Among them, the interpolation method applicable to an unstructured grid system is discussed. In a regular hexahedron enclosure, radiative wall heat fluxes are calculated and compared with exact solutions. The enclosure has an absorbing, emitting and nonscattering medium and a constant temperature distribution. These results are obtained with varying optical depths (xD = 0.1, 1.0, 10.0). Also, the same calculations are performed in an irregular hexahedron enclosure. The DOIM is applied to an unstructured grid system as well as a structured grid system for the same regular hexahedron enclosure. They are compared with the exact solutions and the computational efficiencies are discussed. When compared with the analytic solutions, results of the DOIM are in good agreement for three-dimensional enclosures. Furthermore, the DOIM can be easily applied to the unstructured grid system, which proves the reliability and versatility of the DOIM.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2008년도 학술발표회 논문집
• /
• pp.1752-1756
• /
• 2008

A simple, accurate and efficient mesh generation technique, the cut-cell method, is able to represent an arbitrarily complex geometry. Both structured and unstructured grid meshes are used in this method. First, the numerical domain is constructed with regular Cartesian grids as a background grid and then the solid boundaries or bodies are cut out of the background Cartesian grids. As a result, some boundary cells can be contained two numerical conditions such as the flow and solid conditions, where the special treatment is needed to simulate such physical characteristics. The HLLC approximate Riemann solver, a Godunov-type finite volume method, is employed to discretize the advection terms in the governing equations. Also, the TVD-WAF method is applied on the Cartesian cut-cell grids to stabilize numerical results. Present method is validated for the rectangular dam break problems. Initially, a conventional grid is constructed with the Cartesian regular mesh only and then applied to the dam-break flow simulation. As a comparative simulation, a cut-cell grids are applied to represent the flow domain rotated with arbitrary angles. Numerical results from this study are compared with the results from the case of the Cartesian regular mesh only. A good agreement is achieved with other numerical results presented in the literature.