• Structural Engineering and Mechanics
• /
• v.50 no.1
• /
• pp.89-103
• /
• 2014

According to experimental studies made so far, design formula of shear characteristics suggested by ISO 22762 and JEAG 4614, representative design code for Lead Rubber Bearing(LRB) shows dependence caused by changes in compressive stress. Especially, in the case of atypical special structure, such as a nuclear power structure, placement of seismic isolation bearing is more limited compared to that of existing structures and design compressive stress is various in sizes. As a result, there is a difference between design factor and real behavior with regards to shear characteristics of base isolation device, depending on compressive stress. In this study, a full-scale low hardness device of LRB, representative base isolation device was manufactured, analyzed, and then evaluated through an experiment on shear characteristics related to various compressive stresses. With design compressive stress of the full-scale LRB (13MPa) being a basis, changes in shear characteristics were analyzed for compressive stress of 5 MPa, 10 MPa, 13 MPa, 15 MPa, and 20 MPa based on characteristics test specified by ISO 22762:2010 and based on the test result, a regression analysis was made to offer an empirical formula. With application of proposed design formula which reflected the existing design formula and empirical formula, trend of horizontal characteristics was analyzed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.323-326
• /
• 2005

In this study, experimental studies were performed the combustion characteristics of end- burning hybrid propulsion system. PMMA, PE were used as fuel and gas oxygen as oxidizer. The regression rate depend on oxidizer flow rate also on thermodynamic properties of fuel. as result, empirical formula for regression rate was deduces with oxidizer flow rate and mass transfer coefficient B number.

• Journal of Wetlands Research
• /
• v.13 no.1
• /
• pp.13-23
• /
• 2011

In this study, Mike11 will be used as the numerical model where a data assimilation method will be applied to it. This paper aims to gain an insight and understanding of data assimilation in flood forecasting models. It will start with a general discussion of data assimilation, followed by a description of the methodology and discussion of the statistical error forecast model used, which in this case is the linear regression. This error forecast model is applied to the water level forecast simulated by MIKE11 to produced improved forecast and validated against real measurements. It is found that there exists a phase error in the improved forecasts. Hence, 2 general formula are used to account for this phase error and they have shown improvement to the accuracy of the forecasts, where one improved the immediate forecast of up to 5 hours while the other improved the estimation of the peak discharge.

• Applied Microscopy
• /
• v.41 no.1
• /
• pp.75-79
• /
• 2011

For quantitative analysis of nano-crystal structure, we reported the accuracy improvement method of lattice parameters measured from electron diffraction. For calculation of Au lattice parameters used as a standard crystal structure, it was considered two different acquisition methods (detector and enegy-filter) and three different calculation methods (conventional, least-square and regression fit). As a result, the measurement reliability could be enhanced by using CCD camera which gives higher performance, while energy-filtering did not affect the improvement the camera constant accuracy. Also, the accuracy of lattice parameters could be improved up to $10^{-4}$ order by regression fitting with correction formula. Finally, it is expected that the combination of regression fitting and intensity extraction from energy-filtered precession electron diffraction gives a solution of quantitative structure analysis for unknown nano-crystals.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.2
• /
• pp.828-834
• /
• 2019

Researchers have previously proven that the flapping motion of the hydrofoil can convert wave energy into propulsive energy. However, the estimation of thrust forces generated by the flapping foil placed in waves remains a challenging task for ocean engineers owing to the complex dynamics and uncertainties involved. In this study, the flapping foil system consists of a rigid NACA0015 section undergoing harmonic flapping motion and a passively actuated elastic flat plate attached to the leading edge of the rigid foil. We have experimentally measured the thrust force generated due to the flapping motion of a rigid foil attached to an elastic plate in a wave flume, and the effects of the elastic plates have been discussed in detail. Furthermore, an empirical formula was introduced to predict the thrust force of a flapping foil based on our experimental results using multiple regression analysis.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.16-17
• /
• 2019

In order to measure the amount of carbon dioxide emitted from the construction sites, many literature which have been conducted have proposed methodologies for calculating coefficients based on actual data collections for estimating the emission formula. The existing data collected under controlled conditions not on site measurement were too limited to apply in actual sites. The purpose of this study is to conduct analysis based on the data measured in fields and to present predictive models using artificial neural network and nonlinear regression analysis for appropriate predictions and practical applications.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.1
• /
• pp.40-49
• /
• 2000

In this paper, an empirical formula to estimate the steering gear torque of a Tanker with a horn type rudder was developed by using the statistical analysis. The hydrodynamic characteristics of the horn type rudder in the free-stream condition were calculated by using the modified lifting line theory by Molland, and the interaction effects by propeller and hull were analyzed by the regression analysis of the sea-trial data of 32 vessels. The comparison with the delivered vessels' data shows that the formula can be used for predicting the steering gear torque at the initial design stage.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.83-88
• /
• 2006

We intend to increase in efficiency of the topographic monitoring of seabed or riverbed by combined with DGPS, RTK GPS and echo sounder. For this study, we defined the error correction of the echo sounder with the experiment of water tank, which is considered the characteristic of estuary riverbed and then we developed the s/w for 3-dimensional monitoring of estuary riverbed and applied the s/w to field test and improved the various problems. On analyzing topography of estuary riverbed by combined GPS with echo sounder, the draught error which is yielded to change of length from the water surface by the movement of survey vessel to the end of the transducer was eliminated by geometrical rearrangement and we defined the correction formula, z = BM+ SAH- $DBR_{(i)}$ - DRT - ED. The sounding error about the echo sounder and characteristic of estuary riverbed was found by understanding the relation of average diameter and residual error and we defined correction formula, Y= -0.00474*In(X) -0.0045 by the regression analysis. and then we verified applicability of correction formula.

• Journal of Pharmaceutical Investigation
• /
• v.21 no.1
• /
• pp.23-32
• /
• 1991

Dissolution profiles of ketoconazole in solid dispersion system (SDS) were investigated in the second fluid (pH 6.8) for the dissolution test (KPV). PVP K-30 and methyl cellulose were used as carriers in SDS, and chloroform as a solvent. Computer optimization technique was applied to obtain an optimum formula of SDS, and the following results were obtained; 1) Dissolution rate of ketoconazole in SDS was larger than that of pure ketoconazole in the second fluid of pH 6.8. 2) PVP K-30 and methyl cellulosr were good carriers for SDS of ketoconazole. Moerover PVP K-30 was better than methyl cellulose. 3) The optimum formula of ketoconazole SDS obtained from computer optimization technique was chloroform 175 ml, PVP K-30 5g and methyl cellulose 0.2g per 1g of ketoconazole. 4) The experimental value of $A_{60}$ (Amount released from ketoconazole tablet during 60 minutes) obtained from SDS by optimum formula agreed well with the value calculated by polynomial regression equation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.1
• /
• pp.19-24
• /
• 1992

Formula feed for fattening cattle ground through 2 mm screen was incubated in the rumen of sheep and goats to evaluate effects of ratio of concentrate to hay and kinds of hay in a ration on determining the degradability (dg) value of protein using in sacco technique. Following results were obtained: 1) Residual dry matter (DM) and crude protein (CP) of formula feed decreased as the time of incubation increased. Regression analyses showed that rates of degradation of DM and CP in the rumen were not the same when they were determined under feeding of rations with different percentages of concentrate. 2) Rate of passage of digesta from the rumen differed between feeding of Italian ryegrass hay ration and that of alfalfa hay ration, but was not influenced by the percentage of concentrate in a ration. 3) The dg value was different when it was estimated with results obtained from determinations under feeding of Italian ryegrass hay ration or that of alfalfa hay ration. The percentage of concentrate in a ration had no influence on the dg value of protein in formula feed.