• Journal of Electrical Engineering and Technology
• /
• 제8권4호
• /
• pp.737-743
• /
• 2013

The small-scaled onsite generators such as photovoltaic power, wind power, biomass and fuel cell belong to decarbonization techniques. In general, these generators tend to be connected to utility systems, and they are called distributed generations (DGs) compared with conventional centralized power plants. However, DGs may impact on stabilization of utility systems, which gets utility into trouble. In order to reduce utility's burdens (e.g., investment for facilities reinforcement) and accelerate DG introduction, the advanced operation algorithms under the existing utility systems are urgently needed. This paper presents the advanced voltage regulation method in power systems since the sending voltage of voltage regulators has been played a decisive role restricting maximum installable DG capacity (MaxC_DG). For the proposed voltage regulation method, the difference from existing voltage regulation method is explained and the detailed concept is introduced in this paper. MaxC_DG estimation through case studies based on Korean model network verifies the superiority of the proposed method.

• 한국항해학회지
• /
• 제18권1호
• /
• pp.63-84
• /
• 1994

Bareboat Charter Register or Dual Registration under a Demise Charter scheme, does not in fact sanc-tion the alternative use of flags of different states, but rather it authorises the use of the flag of the coun-try where the ship is temporarily flagged only. Bareboat Charter Register is not intended to miselead third party states or persons dealing with the ship in respect of its nationality. Bareboat Charter Register gives a shipwner a more flexible and attractive package, for example mortga-ging facilities might be more attractive in one state because of its stronger laws relating to recovery of liens, whereas the manning requirements might be attractive in another state. By using Bareboat Charter Register, a shipwner/manager can avail himself of both advantage instead of settling for a compro-mise. Ships on a Bareboat charter Register would be subject to the safety, manning and anti-pollution require-ments of the second flag state and would carry that state's right to fly a flag of the original state be withd-rawn and the effect is to suspend the registration during the period of demise charter except in so far as relates to Title transactions.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2015년도 특별논문집
• /
• pp.1-8
• /
• 2015

In general, the strength assessment for heavy lift vessel is carried out under two stages. The first stage is to comply with the requirement of KR (Korean Register of Shipping) Steel Barges and Rules for Classification of Steel Ships. At the second stage, the structural strength analysis by Finite Element Method is peformed. This paper describes the strength assessment considering various loads for the heavy lift vessel of sheerleg type.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권1호
• /
• pp.86-97
• /
• 2005

Nowadays, Water Mist Fire Extinguishing System is increasingly used in maritime field for various application. The fire extinguishing capability of the system should be verified by hydraulic calculation in the same manner as the conventional water based fire extinguishing system such as sprinkler system. water spray system and etc. Additionally, the review of effectiveness of friction loss calculation method used for hydraulic calculation is needed because the pipe flow characteristic of its piping system has higher Reynolds number than that of the conventional system. In this paper the review work was carried out based on the NFPA Code 750.

• 전기학회논문지
• /
• 제64권7호
• /
• pp.971-977
• /
• 2015

The electric propulsion system requires more reliability and safety than the conventional propulsion system because any sudden changes of electric system would bring tremendous effects on the ship's safety and propulsion. So it is very important to consider the potential transient effects. This paper discusses one of the worst electric accident. That is, one or two of generators are out of service in normal seagoing condition. And the appropriate measures are simulated in order to prevent the frequency decline that can bring the other generator's tripping. In addition, the relation between the transient effects and the major factors(inertia of generator/motors, governor's drooping characteristic and response speed) are also identified using the ETAP software.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권3호
• /
• pp.446-454
• /
• 2008

Control devices for fire safety systems located in a engine room are to be arranged at a safe position which is easily accessible during a fire. To develop an interpretation for the safe position in engine rooms, calculation and experiments are carried out to determine a correlation between radiant heat and distance from fire in this paper. On the basis of results of this research, the control devices for a main engine are to be installed in the behind side of an obstruction to reduce radiant heat from the fire of the main engine. In case of other control devices, they are also to be provided in the same manner of control devices for the main engine or are to be placed with 5 meters far from fire hazards.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권3호
• /
• pp.455-460
• /
• 2008

The flammable gas monitoring system is to be provided in cargo pump rooms of tankers in accordance with the requirements of SOLAS regulations, and flammable gas detectors are to be arranged in a proper position. In this paper, simulation tests and CFD analysis are carried out under the actual ventilation conditions of pump rooms in the ship in service. Based on the results, a new guidelines for an arrangement of flammable gas detectors are suggested.

• 한국CDE학회논문집
• /
• 제20권3호
• /
• pp.281-290
• /
• 2015

The specific goal of the SMS (Ship Management System) is to increate ship safety and decrease maintenance fee. Equipment of ship is managed by PMS (Planned Management System), subsystem of SMS. But hull has not managed by ship manager. So, the Classes have developed the system for hull maintenance. Recently, the ship maintenance system has been developed for satisfying operator's requirements such as managing maintenance data as integrated platform, intuitive manipulation and design for ease of use. To reflect such requirement, 3D Model based maintenance system was introduced for ship in operation stage. Hull items that have to be inspected, repaired, replaced, are stored in integrated data platform with drawing, reports, and etc. and completely linked to 3D product Model. This system is specially developed for measurement and maintenance of hull thickness.

• 한국해양공학회지
• /
• 제34권2호
• /
• pp.120-127
• /
• 2020

Evaluation of fatigue strength considering the springing effect of very large container ships is crucial in the design stage. In this study, we established a fatigue strength evaluation method considering a linear springing component in the frequency domain. Based on a three-dimensional global model, a fluid-structure interaction analysis was performed and the modal superposition method was applied to determine the hot spot stress at the hatch corner of very large container ships. Fatigue damage was directly estimated using the stress transfer function with a linear springing response. Furthermore, we proposed a new methodology to apply the springing effect to fatigue damage using hull girder loads. Subsequently, we estimated the fatigue damage contribution due to linear springing components along the ship length. Finally, we discussed the practical application of the proposed methods.

• 한국기계가공학회지
• /
• 제18권6호
• /
• pp.82-90
• /
• 2019

To reduce emissions of marine pollutants, regulations are being tightened around the world. In the shipbuilding and shipping industries, various countermeasures are being put forward. As there are limits to applying countermeasures to ships already in operation, however, it is necessary for these vessels to use energy efficiently. The sensors installed on ships typically gather a very large amount of data, and thus a big data platform is needed to manage and analyze the data. In this paper, we build a big data analysis platform based on Hadoop and Spark, and we present a method to detect abnormal ship operation using the platform. We also utilize real ship operation data to discuss the data analysis experiment.