• 대한자원환경지질학회:학술대회논문집
• /
• 대한자원환경지질학회 2002년도 춘계 공동학술발표회
• /
• pp.8-10
• /
• 2002

POPs in sediments and soil in the PRD are comparable to or much higher than those reported in other regions. Some sites may be classified as POPs- polluted with high ecological risks. Large-scale land transform in the process of regional urbanization may facilitate the transfer of POPs in the soil to the sedimentary system by enhancing the soil run-off. Urban atmospheric PCBs in PRD are found to be less than some of the North American or European urbans, but PAHs are significantly higher. The center of the PRD has been the major source area of PAHs and organochlorine pesticides in the PRD. The northern part of the PRD serves as a regional sink for the air particulates and affiliated POPs.

• 산학경영연구
• /
• 제13권
• /
• pp.223-246
• /
• 2000

본 연구는 학술적 기업가의 역할을 중심으로 학술적 기업가의 벤치기업 창업활동을 지원하기 위한 산 학 관 협력모델의 구성을 탐색하였다. 벤처기업 창업 인프라 제공 주체는 정부, 대학, 벤처캐피탈기관 등이 대표적이며, 그 가운데 대학, 특히 학술적 기업가들의 역할이 가장 중요하다. 이와 같은 학술적 기업가의 성공적 창업은 기초환경요인의 유효성 여부에 크게 좌우된다. 대학은 학술적 기업가들의 창업동기와 제약 요인을 바탕으로 정책, 절차, 그리고 보조금 지원 등 공식적 지원프로그램을 통해 경제개발에 기여할 수 있는 연구를 수행하도록 지원할 필요가 있다. 이를 위해 기술이전시스템 추측, 협동 교육시스템 도입, 벤처기업 창업보육시스템 구축, 그리고 학술적 기업가 활동 지원문화 조성프로그램 등을 마련해야한다. 이에 본 연구는 학술적 기업가의 창업동기를 바탕으로 창업활동을 하나의 과정으로 간주하고 창업지원 주체별 역할에 근거하여 학술적 기업가의 창업활동을 지원하기 위한 산 학 관 협력 모델을 탐색하였다.

• 한국연소학회지
• /
• 제22권2호
• /
• pp.50-56
• /
• 2017

This study was conducted an experiment for the thermal flow mechanism of the surrounding butane gas can and pressure change in butane can with oversized cookware. And numerical analysis was performed to analyze the process of heat transfer around butane can. Effect of radiant heat from small size cookware is very small. Thus small size cookware does not have a significant impact on the butane gas range safety. But radiant heat of oversized cookware is larger than small size cookware. Therefore it gives an adverse effect on the butane can. And when internal pressure of butane can is greater than about 406.8~447.2 kPa, a safety device of portable butane gas range were working. The causes of safety device working is because of trivet height. Trivet height is lowered, the radiant heat is increased. This radiant heat is to raise pressure of inside butane can. Experimental and numerical analysis results, the lower thermal conductivity of the cookware is greater the effects of radiant heat.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.506-509
• /
• 2006

Shaped Sound Focusing is defined as the generation of acoustically bright shape in space using multiple sources. The acoustically bright shape is a spatially focused region with relatively high acoustic potential energy level. In view of the energy transfer, acoustical focusing is essential because acoustic energy is very small to use other type of energy. Practically, focused sound shape control not a point is meaningful because there are so many needs to enlarge the focal region especially in clinical uses and others. If focused sound shape can be controlled, it offers various kinds of solutions for clinical uses and others because a regional focusing is essentially needed to reduce a treatment time and enhance the performance of transducers. For making the shaped-sound field, control variables, such as a number of sources, excitation frequency, source positioning, etc., should be taken according to geometrical sound shape. To verify these relations between them, wavenumber domain matching method is suggested because wavenumber spectrum can provide the information of control variables of sources. In this paper, the procedures of shaped sound focusing using wavenumber domain matching and relations between control variables and geometrical sound shape are covered in case of an acoustical ring.

• 한국정밀공학회지
• /
• 제30권8호
• /
• pp.815-823
• /
• 2013

The hot curvature forming of large aluminum plates is a process used to produce spherical liquefied natural gas (LNG) tanks. In this study, we describe a method to determine the optimum shape of blanks to minimize the root gap in the forming process. The method proposed in this study was applied to a small-scale model for thick plates with a curvature of 1500 mm and thickness of 6 mm. First, the shape of the curved shells was determined as the target shape, and then a coordinate transform was used to determine the optimum blank shape, which was then iteratively modified using the results of finite element method (FEM) simulations, including heat transfer, until the shape error was minimized. Experiments in forming using Al5083 thick plate were carried out, showing that the method can determine the optimum blank shape within an allowable root gap of 0.1 mm.

• 대한방사선기술학회지:방사선기술과학
• /
• 제43권4호
• /
• pp.289-295
• /
• 2020

This study investigated the feasibility of establishing a college of medicine in the western region of Chungnam to fill the gap in the medical doctor in charge of essential medical care in the region. Currently, the level of medical services in Chungnam is low compared to provinces across the country and in particular, 7 cities and towns, which account for 760,000 people, one-third of Chungnam's population, are located in the western regions of Chungnam. Because of this, in the event of an emergency patients, it is necessary to travel to Cheonan, Daejeon, Seoul, etc. where the regional emergency medical center is located for more than 1 hour and 30 minutes. In the case of critically ill and emergency patients transfer, it is a situation that misses the golden time and causes valuable loss of life. In order to improve the medical environment in the western region of Chungnam and improve the lives of residents in vulnerable areas of medical services, it is believed that establishing a college of medicine in the western region of Chungnam is essential.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권4호
• /
• pp.487-495
• /
• 2007

The objectives of the present study were to initiate cloning of Korean native goat by somatic cell nuclear transfer (NT) and to examine whether unovulated (follicular) oocytes can support the same developmental ability of NT embryos as ovulated (oviductal) oocytes after hCG injection in stimulated cycles of the goat. The in vivo-matured and immature oocytes were collected from the oviducts and follicles of superovulated does, respectively, and the immature oocytes were maturated in vitro. Ear skin fibroblasts derived from a 3-yr-old female Korean native goat were used as the donors of nuclei or karyoplasts. Following fusion, activation and in vitro culture to a 2- to 4-cell stage, 49 in vitro-derived and 105 in vivo-derived embryos were transferred to 6 and 17 recipient does, respectively. One doe and three does of the respective groups were identified as pregnant by ultrasonography on day 30 after embryo transfer. However, only one doe, which had received in vivo-derived embryos, delivered a normal female kid of 1.9 kg on d 149. The cloned kid gained more weight than her age-matched females as much as 87% during the first 4 mo after birth (17.7 vs. $9.4{\pm}0.8$ kg) and reached puberty at 6-mo age a few months earlier than normal female does. The telomere length of the kid, which was similar to that of the donor fibroblast at 2-mo age, decreased 8% between 2- and 7-mo ages. Moreover, at 7-mo age, she had 21% shorter telomere than her age-matched goats. To our knowledge, this is the first case in which a cloned animal born with a normal weight exhibited accelerated growth and development. The unusually rapid growth and development of the cloned goat may have resulted from SCNT-associated epigenetic reprogramming involving telomere shortening.

• Imaging Science in Dentistry
• /
• 제52권3호
• /
• pp.239-244
• /
• 2022

Purpose: Despite the proliferation of numerous morphometric and anthropometric methods for sex identification based on linear, angular, and regional measurements of various parts of the body, these methods are subject to error due to the observer's knowledge and expertise. This study aimed to explore the possibility of automated sex determination using convolutional neural networks(CNNs) based on lateral cephalometric radiographs. Materials and Methods: Lateral cephalometric radiographs of 1,476 Iranian subjects (794 women and 682 men) from 18 to 49 years of age were included. Lateral cephalometric radiographs were considered as a network input and output layer including 2 classes(male and female). Eighty percent of the data was used as a training set and the rest as a test set. Hyperparameter tuning of each network was done after preprocessing and data augmentation steps. The predictive performance of different architectures (DenseNet, ResNet, and VGG) was evaluated based on their accuracy in test sets. Results: The CNN based on the DenseNet121 architecture, with an overall accuracy of 90%, had the best predictive power in sex determination. The prediction accuracy of this model was almost equal for men and women. Furthermore, with all architectures, the use of transfer learning improved predictive performance. Conclusion: The results confirmed that a CNN could predict a person's sex with high accuracy. This prediction was independent of human bias because feature extraction was done automatically. However, for more accurate sex determination on a wider scale, further studies with larger sample sizes are desirable.

• 한국문헌정보학회지
• /
• 제54권4호
• /
• pp.27-51
• /
• 2020

지역대표도서관은 도서관의 보존공간 부족 문제 해결을 위해 공동보존자료관을 설치하고 있다. 본 연구는 지역 대표도서관인 충남도서관 공동보존자료관의 구체적인 운영정책 및 추진방안 마련을 위해 공공도서관 사서를 대상으로 설문조사와 FGI 방법으로 인식조사를 실시하였다. 이를 토대로 공동보존자료관의 목표인 인쇄자료와 디지털자료의 공동보존 및 활용에 맞는 운영정책 및 추진방안을 제안하였다. 연구결과, 첫째, 충남도서관 공동보존자료관에서는 참여 도서관의 보존공간 상황과 수요를 고려하여 우선적으로 단행본과 연속간행물을 소유권과 함께 우선적으로 이전해야한다. 둘째, 신속하고 편리한 공동보존자료관 운영을 위하여 전체 참여 도서관이 이용할 수 있는 운영관리시스템을 구축하고 클라우드 기반의 통합자료관리스템과 연계해야 한다. 셋째, 공동보존자료관에서 디지털화가 필요하다고 판단된 자료의 디지털화 및 아카이빙 방안 등을 제안하였다.

• 대기
• /
• 제15권2호
• /
• pp.75-90
• /
• 2005

이 연구에서는 지면-대기 모수화 방안 (BATS1e)이 접합된 미국 국립기상연구센터 (NCAR)에서 개발한 지역기후모델(RegCM2)을 이용하여 지면피복의 변화가 동아시아 여름몬순에 미치는 영향에 대해서 조사하였다. 지면피복 변화의 영향을 분석하기 위하여 두 종류의 지면피복 자료를 이용하였다. 하나는 NCAR에서 제공하는 지면피복 자료 (CTL 실험)이고 다른 하나는 최근의 기상위성자료로부터 직접 분류한 고해상도 지면피복분류 자료(LCV 실험)이다. CTL 실험에서는 중국 중부지역과 몽고지역의 지면온도가 각각 약 $1-3^{\circ}C$ 높고 낮게 모의되었다. 또한 모의 영역 북부지역에서는 강수가 과다하게 모의된 반면 모의영역 남부 바다지역의 강수는 과소하게 모의되었다. 지면피복 변화에 의한 알베도, 거칠기 길이 및 최소기공저항계수와 같은 지면의 생물리적 요소들의 변화는 지면-대기 상호작용을 변경시켰다. 즉, 지면피복이 낙엽활엽수림에서 농지와 관계농지로 변경된 LCV 실험의 중국 중부지역에서는 잠열 속과 풍속이 현저하게 증가되었다. 그 결과 CTL 실험에서 나타났던 중국 중부지역에서의 온난편차가 LCV 실험에서는 대부분 완화되었다. 중국 중부지역에서의 강한 기온 하강은 태평양과 대륙사이의 기압 차를 약화시키고 있다. 남동에서 북서방향으로의 기압경도력이 약화됨에 따라 중국 남부와 남중국해로부터 북동쪽으로의 수증기 수송도 약화되었다. 이러한 수증기 수송의 변화는 모의 영역 북부지역에서의 과다한 강수 모의와 남중국해에서의 과소한 강수모의를 동시에 크게 완화시켰다. 그러나 지면피복의 변화는 특히 7월과 8월에 한반도와 일본 열도 지역에서의 강수를 크게 증기시키고 있다.