• 항공우주산업기술동향
• /
• 제7권1호
• /
• pp.11-19
• /
• 2009

지역 내에서 주로 운항되는 중형항공기 시장은 2001년 이후 전반적인 세계경기 회복기조 속에서 꾸준한 성장을 이어왔으나, 2007년 말 경부터 이어진 세계적인 불경기는 현재 그 미래를 혼란스럽게 하고 있다. 현재까지 리저널 항공기 산업은 항공기의 대형화와 리저널 젯의 확산이 주요 시장 동향으로 나타나고 있었다. 그러나, 유가 급등이나 세계 경제 침체와 같은 상황적 변화는 세계 항공사에 경제적인 타격을 가져왔으며 특히, 1990년대 ERJ-145의 성공으로 중형항공기의 주류를 이루었던 터보젯 기에 대한 회의적인 시각과 함께, 잊혀져가던 터보프롭 중형기가 새로이 주목받기도 하는 등 이는 다시 항공기 제작사 및 이들의 개발 계획에 큰 영향을 끼쳤다. 이에 따라 비록 현재 진행 중인 신규 항공기 개발 계획은 여전히 터보젯 기종이 주를 이루고 있으나, 여러 시장 전망 자료에서는 향후 시장에서 터보프롭기의 비중을 늘리고 있는 현실이다. 본 고에서는 여러 시장 전망 자료를 바탕으로 향후 중형항공기 시장의 변화 방향에 대하여 논하였다.

• 한국항공운항학회지
• /
• 제19권4호
• /
• pp.67-73
• /
• 2011

For loads analysis of airplane, applicable regulation should be determined. Then, loads conditions are prepared from the regulation. Modeling for aerodynamic, mass, and structure are performed. Panel method is usually adopted for aircraft loads analysis to obtain air loads. The ARGON which is a multidisciplinary fixed wing aircraft design software co-developed by the KARI and TsAGI are used for loads analysis. The ARGON can be utilized for flutter and stress analysis as well as for flight and ground loads analysis. In this paper, flight loads analysis for wing structural design of the regional aircraft at the conceptual design phase are performed with the ARGON. FAR 25 is used for the regulation for the load analysis. Shear force, bending moment and torsion diagrams for the wing and shear force and hinge moment for the aileron are presented.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.447-452
• /
• 2011

Propeller shall have high efficiency and improved aerodynamic characteristics to get the thru5t to fly at high speed for the Regional turboprop aircraft. That is way Clark-Y airfoil which is used to conventional turboprop aircraft propeller is selected as a blade airfoil. Adkins method is used for aerodynamic design and performance analysis with respect to the propeller design point. Adkins method is based on the vortex-blade element theory which design the propeller to satisfy the condition for minimum energy loss. propeller geometry is generated by varying chord length and pitch angle at design point of Regional turboprop aircraft. The propeller design results indicate that is evaluated to be properly constructed, through analysis of propeller aerodynamic characteristics using the Meshless method and MRF, SM method.

• International Journal of Aeronautical and Space Sciences
• /
• 제15권2호
• /
• pp.138-145
• /
• 2014

The initial configuration for 95-seat passenger regional turboprop aircraft, the so called KC950, was designed to meet the market requirements. This paper prescribes the initial design based upon aircraft design guidelines and compared the competitive aircraft configurations after considering the related FAR 25 regulations. More specifically, results of design describe how to select the fuselage cross-sectional area, how to layout the cabin, and how to determine the overall shape and physical dimension of the fuselage. Sizing of wing and empennage areas is estimated using empirical equations and tail volume coefficients in this design. Some design guidelines to determine wing sweep angle, taper ratio, incidence angle and location are also introduced.

• Advances in aircraft and spacecraft science
• /
• 제5권4호
• /
• pp.477-498
• /
• 2018

The main goal of this article is to validate a methodological process in Actran MSC Software, that is based on the Finite Element Method, to evaluate the comfort in the cabin of a regional aircraft and to study the noise and vibrations reduction through the fuselage by the use of innovative materials. In the preliminary work phase, the CAD model of a fuselage section was created representing the typical features and dimensions of an airplane for regional flights. Subsequently, this model has been imported in Actran and the Sound Pressure Level (SPL) inside the cabin has been analyzed; moreover, the noise reduction through the fuselage has been evaluated. An important investigation and data collection has been carried out for the study of the aircraft cabin to make it as close as possible to a real problem, both in geometry and in materials. The mesh of the structure has been built from the CAD model and has been simplified in order to reduce the number of degrees of freedom. Finally, different fuselage configurations in terms of materials are compared: in particular, aluminum, composite and sandwich material with composite skins and poroelastic core are considered.

• 한국항공운항학회지
• /
• 제21권1호
• /
• pp.1-7
• /
• 2013

To have the competitiveness in the future worldwide small aircraft market, we should be able to develop the aircraft which is highly safe, easy to fly, and having excellent flight characteristics. FBW(Fly-By Wire) system is essential for the enhancement of flight safety and control easiness. FBW system that has been applied only to the modern fighter and transport aircraft is recently applied to smaller aircraft such as regional aircraft, business aircraft and even small aircraft. The purpose of this research includes the development of flight control computer, the definition of FBW system component, the design concept of each component for redundant management, OFP(Operational Flight Program) development, FBW system integration and HILS(Hardware In-the Loop Simulation) verification environment to test this FBW system.

• Advances in aircraft and spacecraft science
• /
• 제8권1호
• /
• pp.17-30
• /
• 2021

This is an investigation for a more electric regional aircraft, considering the ATR 72 aircraft as an example and the electrification of its four double slotted flaps, which were estimated to require an energy of 540 Wh for takeoff and 1780 Wh for landing, with a maximum power requirement of 35.6 kW during landing. An analysis and evaluation of three energy harvesting systems has been carried out, which led to the recommendation of a combination of a piezoelectric and a thermoelectric harvesting system providing 65% and 17%, respectively, of the required energy for the actuators of the four flaps. The remaining energy may be provided by a solar energy harvesting photovoltaic system, which was calculated to have a maximum capacity of 12.8 kWh at maximum solar irradiance. It was estimated that a supercapacitor of 232 kg could provide the energy storage and power required for the four flaps, which proved to be 59% of the required weight of a lithium iron phosphate (LFP) battery while the supercapacitor also constitutes a safer option.

• 한국항공우주학회지
• /
• 제40권12호
• /
• pp.1070-1079
• /
• 2012

항공기 사고 시 항공기 구조물의 충돌에너지 흡수 특성은 탑승자 생존성 향상을 위해 매우 중요한 요소이다. 일반적으로 항공기의 비상착륙 시 충돌에너지는 착륙장치, 동체 하부 구조물(Subfloor), 좌석을 통해 탑승자에게 흡수/전달되며, 이 세 가지 구성품은 항공기 내추락성에 매우 중요한 구성품이다. 이 구성품들 중 동체 하부 구조물의 충돌 에너지 흡수 특성은 항공기 형식, 구조물의 형태 및 적용된 재료에 따라 결정된다. 따라서 항공기 동체 하부 구조물의 내추락 특성에 관한 연구는 항공기 안전성 향상을 위해 매우 중요한 분야이다. 본 연구에서는 상대적으로 내추락 특성이 취약한 80~90 인승급 리저널항공기 Narrow Body 동체의 내추락 유한요소 모델 구성과 외연적 유한요소해석을 통한 내추락 해석이 수행되었다. 동체 구조의 충돌에너지 흡수 및 좌석 장착점의 가속도 응답 등의 해석 결과 분석을 통해, 내추락 특성 및 성능 평가 과정을 수행하였다.

• 한국항공우주학회지
• /
• 제41권12호
• /
• pp.959-966
• /
• 2013

이 논문에서는 설계정보가 없는 노후 항공기를 사용한 P-3CK 해상초계기 사업을 바탕으로, 끝단거리 부족 결함 수리를 위한 패스너 홀 구조특성 연구를 수행하였다. 이를 위해 끝단거리 결함이 많이 발생했던 낫셀 론저론 부분을 선택하고, 1.5, 1.8, 2.0배 끝단거리에 대한 정적 해석을 수행하여 보수적인 응력을 구하였다. 이 응력을 바탕으로 TWIST의 표준하중 스펙트럼을 적용하여 비행하중을 생성하고, 이 비행하중을 이용하여 균열성장 피로해석을 수행하였다. 이 결과를 통하여 P-3CK 사업 중 수리된 패스너 홀의 유효성을 평가하고 정비주기 및 기준을 설정하였다.

• 지역연구
• /
• 제15권2호
• /
• pp.39-73
• /
• 1999

An examination is made of container movements, air cargo/passengers and telecommunications traffic in Northeast Asia during 1995. A drawback to studying flows between major cities is that information on telecommunications traffic is only available between countries. Also container traffic data are restricted to individual ports. Consequently, most attention is paid to movements of passenger aircraft between major cities derived from analysing timetables, particularly as they can be related to regional development concepts applied in Europe such as the 'blue banana' and 'bunches of grapes' concepts. A 'peas in a pod' may be a more appropriate movements are examined again in 1998 to gauge the impact of the Asian crisis.