• 한국융합학회논문지
• /
• 제6권3호
• /
• pp.51-57
• /
• 2015

본 논문은 비규칙 종속성을 가진 내포된 루프의 수행 속도를 향상시키기 위해서 Extended Three Region Partitioning Method 라는 효과적인 루프 분할 방법에 대해서 연구하였다. 본 논문에서 제안된 루프 분할 방법은 변수 재명명에 의해서 역종속성을 가진 내포된 루프를 제거한 후 네 개의 선중에 하나 혹은 그 이상의 적절한 선을 선택하는 알고리즘을 개발한다. 한 개의 선이 선택되면 선택된 선에 의해서 전체 영역은 두 개의 병렬지역으로 분할된다. 한 개 이상의 선이 선택되면 그 선들에 의해서 하나의 순차지역과 두 개의 병렬지역으로 분할한다. 제안된 분할 방법은 기존의 분할 방법보다 성능이 우수함을 성능 분석에서 보여준다.

• 한국멀티미디어학회논문지
• /
• 제7권3호
• /
• pp.319-326
• /
• 2004

본 논문에서는 물체의 경계선을 고려한 칼라 영상 분할 방법을 제안한다. 제안 방법은 먼저 원영상을 벡터 양자화한 후 양자화된 영상의 인덱스 맵을 이용하여 초기 영역을 설정하였다. 그 후 HSI컬러 공간을 이용한 영역 병합에서 물체의 경계선을 고려하기 위해 경계선 제한 성분을 적용하여 영역들을 병합하였다. 또한 RGB 컬러 공간을 이용하여 HSI 컬러 공간에서 병합되지 않은 영역들을 병합하였다. 그리 고 영역병합 알고리즘을 통해 반복적인 처리를 감소시킴으로써 처리 시간을 줄였다. 실험 결과에서는 다양한 영상에 대해 주요 영역들의 분할 결과 및 처리소요시간에서 우수한 성능을 보였다.

• 한국측량학회지
• /
• 제25권6_1호
• /
• pp.575-583
• /
• 2007

Surface segmentation aims to represent the terrain as a set of bounded and analytically defined surface patches. Many previous segmentation methods have been developed to extract planar patches from LIDAR data for building extraction. However, most of them were not fully satisfactory for more general applications in terms of the degree of automation and the quality of the segmentation results. This is mainly caused from the limited information derived from LIDAR data. The purpose of this study is thus to develop an automatic method to perform surface segmentation by combining not only LIDAR data but also images. A region-based method is proposed to generate a set of planar patches by grouping LIDAR points. The grouping criteria are based on both the coordinates of the points and the corresponding intensity values computed from the images. This method has been applied to urban data and the segmentation results are compared with the reference data acquired by manual segmentation. 76% of the test area is correctly segmented. Under-segmentation is rarely founded but over-segmentation still exists. If the over-segmentation is mitigated by merging adjacent patches with similar properties as a post-process, the proposed segmentation method can be effectively utilized for a reliable intermediate process toward automatic extraction of 3D model of the real world.

• 인간식물환경학회지
• /
• 제24권6호
• /
• pp.551-561
• /
• 2021

Background and objective: Vietnam is prioritizing agricultural production for food export capacity in all national policies. As a result, for three decades, its agriculture has been making quite many remarkable achievements. Methods: The most successful one is that the nation has become one of the world's leading rice exporters and ensures its national food security. Through these endeavors, the Mekong River Delta (MRD), in particular, has emerged as a key region in ensuring national food security and rice export. Results: The new era can now see Vietnamese agriculture turning to place special emphasis on commodity quality and the improvement of the living environment. This is evidenced, for example, by the phenomenon that the MRD, as a rice basket of the whole country, is making moves back to nature-based agriculture with attempts to restore the natural ecology, including preserving and restoring local traditional rice seeds, adopting natural farming practices and minimizing the use of chemical fertilizers and pesticides. Conclusion: The case studies of nature-based farming practices in the MRD indicate that, while the national agriculture is generally developing large-scale production, the small-scale farming in the region, integrated with tourist and educational activities on-site, is meeting the demands of a highly potential domestic niche market. Moreover, this model appears to be a sustainable farming approach that defines itself as a working green livelihood for the region.

• Geomechanics and Engineering
• /
• 제13권4호
• /
• pp.585-600
• /
• 2017

This study deals with simple solutions for a spherical or circular opening excavated in elastic-brittle plastic rock mass compatible with a linear Mohr-Coulomb (M-C) or a nonlinear Hoek-Brown (H-B) yield criterion. Based on total strain approach, the closed-form solutions of stresses and displacement are derived simultaneously for circular and spherical openings using original H-B and M-C yield criteria. Two simple numerical procedures are proposed for the solution of generalized H-B and M-C yield criteria. Based on incremental approach, the similarity solution is derived for circular and spherical openings using generalized H-B and M-C yield criteria. The classical Runge-Kutta method is used to integrate the first-order ordinary differential equations. Using three data sets for M-C and H-B models, the results of the radial displacements, the spreading of the plastic radius with decreasing pressure, and the radial and circumferential stresses in the plastic region are compared. Excellent agreement among the solutions is obtained for all cases of spherical and circular openings. The importance of the use of proper initial values in the similarity solution is discussed.

• 대한기계학회논문집A
• /
• 제25권2호
• /
• pp.220-227
• /
• 2001

The fatigue crack initiation life is studied on automotive tensile-shear spot weldment made from cold rolled carbon steel(SPC) sheet by using DCPDM and local strain approach. It can be found that the fatigue crack initiation behavior in spot weldment can be definitely detected by DCPDM system. To predict the fatigue life of spot weldment, the local stresses and strains at the potential critical region are estimated by approximate method based on Neubers rule and elastic-plastic FEM analysis. A satisfactory correlation between the predicted life obtained from Local strain approach based on Neubers rule and experimental life can be found in spot weldment within a factor of 2.

• 한국항공우주학회지
• /
• 제36권6호
• /
• pp.565-573
• /
• 2008

본 연구에서는 다수 무인기의 군집비행을 위한 행위기반 분산형 제어기법을 제안한다. 각 무인기는 특정한 영역으로 비행해야하는 고유의 임무와 동시에 무인기 간의 거리를 유지해야하는 요구조건도 가지고 있다. 이러한 두 가지 요구조건은 서로 상충된다. 제어기를 설계하기 위하여 각 무인기가 통신채널을 통하여 상태변수를 교환할 수 있다는 가정 하에 결합형 동역학을 적용하였다. 군집비행의 성능을 개선하기 위하여 제어이득 행렬의 최적화를 수행하였다. 제어기의 성능을 평가하기 위하여 다수 무인기의 경로점 통과 임무를 위한 수치 시뮬레이션을 수행하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제18권8호
• /
• pp.2253-2280
• /
• 2024

In the upcoming era of transportation, a groundbreaking technology, known as vehicle-to-everything (V2X) communication, is poised to redefine our driving experience and revolutionize traffic management. Real-time and secure communication plays a pivotal role in V2X networks, with the decision-making process being a key factor in establishing communication and determining malicious nodes. The proposed framework utilizes a directed acyclic graph (DAG) to facilitate real-time processing and expedite decision-making. This innovative approach ensures seamless connectivity among vehicles, the surrounding infrastructure, and various entities. To enhance communication efficiency, the entire roadside unit (RSU) region can be subdivided into various sub-regions, allowing RSUs to monitor and govern each sub-region. This strategic approach significantly reduces transaction approval time, thereby improving real-time communication. The framework incorporates a consensus mechanism to ensure robust security, even in the presence of malicious nodes. Recognizing the dynamic nature of V2X networks, the addition and removal of nodes are aligned. Communication latency is minimized through the deployment of computational resources near the data source and leveraging edge computing. This feature provides invaluable recommendations during critical situations that demand swift decision-making. The proposed architecture is further validated using the "veins" simulation tool. Simulation results demonstrate a remarkable success rate exceeding 95%, coupled with a significantly reduced consensus time compared to prevailing methodologies. This comprehensive approach not only addresses the evolving requirements of secure V2X communication but also substantiates practical success through simulation, laying the foundation for a transformative era in transportation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.852-857
• /
• 2004

A new and efficient method for estimating the statistical moments of a system performance function has been developed. The method consists of two steps: (1) An approximate response surface is generated by a quadratic regression model, and (2) the statistical moments of the regression model are then calculated by experimental design techniques proposed by Seo and $Kwak^{(4)}$. In this approach, the size of experimental region affects the accuracy of the statistical moments. Therefore, the region size should be selected suitably. The D-optimal design and the central composite design are adopted over the selected experimental region for the regression model. Finally, the Pearson system is adopted to decide the distribution type of the system performance function and to analyze structural reliability.

• 한국멀티미디어학회논문지
• /
• 제22권12호
• /
• pp.1347-1355
• /
• 2019

Deep learning approach based on convolution neural network (CNN) has extensively studied in the field of computer vision. However, periocular feature extraction using CNN was not well studied because it is practically impossible to collect large volume of biometric data. This study uses the ResNet model which was trained with the ImageNet dataset. To overcome the problem of insufficient training data, we focused on the training of multi-layer perception (MLP) having simple structure rather than training the CNN having complex structure. It first extracts features using the pretrained ResNet model and reduces the feature dimension by principle component analysis (PCA), then trains a MLP classifier. Experimental results with the public periocular dataset UBIPr show that the proposed method is effective in person authentication using periocular region. Especially it has the advantage which can be directly applied for other biometric traits.