• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 전력전자학술대회
• /
• pp.407-408
• /
• 2017

In regenerative mode of an IPMSM control system without a bi-directional DC-DC converter, the 3-phase PWM inverter charges the battery. At this time, the regenerative torque reference for braking must output the proper torque reference to charge the battery. This paper proposed a regeneration control method that controls the voltage and current of the battery through CC-CV control at the regenerative braking torque corresponding to the driver's brake control.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.239-242
• /
• 2001

Energy recovery in the regenerative region is very important when SRM(Switched Reluctance Motor) is used in traction drive. This is because that to reduce energy toss during mechanical breaking and/or to have a high efficiency drive during breaking. To control excitation voltage in motor operation and regenerative voltage in the generator operation in the SRM, multi-level voltage control is effective. This paper proposes multi-level inverter which is useful for motoring and regenerative operation in SRM. The proposed method is verified by experiment.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 추계학술대회 논문집
• /
• pp.212-214
• /
• 2007

Regenerative energy which is generated during brake periods of DC traction might cause malfunction or destruction of rectifier or any other power conversion devices caused the increment of DC line voltage. Regenerative energy storage system using super-capacitor is one of the method to control the DC line voltage safely. And super-capacitor is very important device as energy storage device. Therefore, In this paper, we designed the regenerative energy storage system using super-capacitor and propose the method about predicting the lifetime of super-capacitor established in storage system. According to the this research, we can estimate the proper replacement moment for the existed super-capacitor due to the safety of the system. And improve the reliability of regenerative energy storage system using super-capacitor.

• 전력전자학회논문지
• /
• 제9권2호
• /
• pp.97-104
• /
• 2004

회생차량에서 직류전원단으로 회생되는 에너지를 교류전원측으로 반환하여 활용하기 위한 장치로서 사이리스터 인버터가 널리 사용되고 있다 기존의 사이리스터 인버터는 단방향의 위상제어방식으로 출력의 역률제어가 불가능하고, 고조파 함유율이 높아 별도의 필터를 필요로 한다. 본 연구에서는 이러한 문제점을 해결하고자 스위칭 소자로서 양방향 제어가 가능한 IGBT를 채용하여 Space vector PWM 제어를 함으로서 유효전력 및 무효전력 제어가 가능한 인버터를 개발하였다. 개발한 인버터는 상업용으로 실계통에 바로 적용이 가능하도록 경제성 및 신뢰성을 제고하여 전체 제어시스템을 디지털 형식으로 구현하였고, 저대역 필터를 내장하여 고조파 발생을 억제하였으며, 전체 부피를 콤팩트하게 하였다. 본 논문에서는 전기철도 직류급전계통에 적합한 회생 인버터의 설계기준, 기술사양, 전력회로, 인버터 및 계통연계 제어기법, 개발시스템, 시험결과 및 특성 등을 기술하였다.

• 드라이브 ㆍ 컨트롤
• /
• 제9권1호
• /
• pp.1-9
• /
• 2012

Nowadays, various researches about eco-friendly vehicles such as hybrid electric vehicle, fuel cell vehicle and electric vehicle have been actively carried out. Since most of these green cars have electric motors, the regenerative energy technology can be used to improve the fuel economy and the energy efficiency of vehicles. The regenerative brake is an energy recovery mechanism which slows a vehicle by converting its kinetic energy into electric energy, which can be either used immediately or stored until needed. This technology plays a significant role in achieving the high energy usage. However, there are some technical problems for controlling the regenerative braking and the electro-hydraulic brake during switching at transient region. In this paper, the performance simulator for fuel-cell vehicle is developed and transient response characteristics of the regenerative braking system are analyzed in the various driving situations. And the hardware-in-the-loop simulation of electro-hydraulic brake is performed to validate the transient characteristics of the regenerative braking system for fuel-cell electric vehicle.

• 유공압시스템학회논문집
• /
• 제7권2호
• /
• pp.19-26
• /
• 2010

The typical trunk lid system for vehicle is composed of a hinge having 4-bar link and gas lifter. Here, the energy regenerative brake of hydraulic driven systems is applied to the tail gate system for vehicle and removed the gas lifter. The new tail gate system is composed of a hydraulic pump by electric motor, a hydraulic motor, four check valves, an accumulator, a relief valve and a directional control valve. The dynamic characteristics of the hydraulic motor system, such as the surge pressure and response time, are investigated in both brake action and acceleration action. The capacity selection method of accumulator by mathematical model is based upon trial and error approach and computer simulation by AMEsim software is carried out.

• 한국산학기술학회논문지
• /
• 제13권2호
• /
• pp.760-771
• /
• 2012

본 연구는 전동차를 운전 시, 영구 자석형 동기전동기(PMSM)가 제동할 때 발생한 회생전력은 모두 활용하며, 전기제동에 대하여도 발생한 회생전력을 모두 흡수할 수 있는 능력을 가진 축소모형 전동기 시스템으로 운전함을 가정한다. 축소모형 전동기의 견인시스템은 각 전동기는 영구 자석형 동기전동기(PMSM)를 개별로 제어하는 1C1M방식으로 구축 하였다. 전동차의 승차감 향상 및 에너지의 효율적 이용 등을 위한 방법으로써 벡터제어 방법을 적용하여 관성부하에 대한 시뮬레이션과 축소모형으로 실험을 하여 좋은 결과를 얻었다. 또한, 영구 자석형 동기전동기(PMSM)의 제동력 확보에 의한 회생제동 제어 확보와 전기제동으로 정지하는 극 저속에서의 속도검출과 전동기를 제어하는 방법의 알고리즘에 대하여 연구 하였다.

• 전기학회논문지
• /
• 제62권3호
• /
• pp.424-430
• /
• 2013

This paper presents a new design works for the braking chopper system which is included in the propulsion system of KTX high speed train. Due to the current fed type synchronous motors used in the propulsion system, some different behaviors are shown comparing to the voltage type other chopper systems. Specially this chopper system acts either braking controlling or regenerative power controlling system with a parallel resistive load in the propulsion system. In this paper, an improved simple high power IGBT brake chopper system has proposed which is able to be replaced with an existing complicated GTO chopper system. The analytical approaches to the parallel load type current chopper system and the propper snubber circuits calculation were explained in this paper to control new chopper system. In addition, the thermal resistance of the cooling system for power dissipation of IGBT modules was calculated also. Finally several PC simulations have been done to clarify its availability.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.198-200
• /
• 2006

In this paper, three types of power control strategies for controlling a Fuel Cell Hybrid Electric Vehicle(FCHEV) are studied in view of fuel economy. The FCHEV has become one of alternatives for future vehicles since it does emit water only without any exhaust gas while it has a high well-to-wheel efficiency together with an energy saving due to regenerative braking. However, it has also several disadvantages such as the complexity of vehicle system, the increased weight and the extra battery cost. Among various power control strategies, a static power control strategy, a power assist control strategy and a fuzzy logic-based power control strategy are simulated and compared to show the effectiveness of each method.

• 전력전자학회논문지
• /
• 제22권1호
• /
• pp.9-17
• /
• 2017

A parallel control algorithm of thyristor dual-converter power system for the DC power supply of railway is proposed. The circulating current and current imbalance generated during parallel operation can be limited to control the output voltage of each power system by using the proposed parallel control algorithm. The proposed control algorithm can also eliminate output current sensor to achieve the same output response without additional costs. The validity of the proposed algorithm is verified through simulation and experiment.