• Journal of Microbiology and Biotechnology
• /
• v.22 no.10
• /
• pp.1406-1411
• /
• 2012

5,5'-Dithiobis(2-nitrobenzoic acid) (DTNB) was selected as an electron transfer mediator and was covalently immobilized onto high porosity carbon cloth to employ as a working electrode in an electrochemical $NAD^+$-regeneration process, which was coupled to an enzymatic reaction. The voltammetric behavior of DTNB attached to carbon cloth resembled that of DTNB in buffered aqueous solution, and the electrocatalytic anodic current grew continuously upon addition of NADH at different concentrations, indicating that DTNB is immobilized to carbon cloth effectively and the immobilized DTNB is active as a soluble one. The bioelectrocatalytic $NAD^+$ regeneration was coupled to the conversion of L-glutamate into ${\alpha}$-ketoglutarate by L-glutamate dehydrogenase within the same microreactor. The conversion at 3 mM monosodium glutamate was very rapid, up to 12 h, to result in 90%, and then slow up to 24 h, showing 94%, followed by slight decrease. Low conversion was shown when substrate concentration exceeding 4 mM was tested, suggesting that L-glutamate dehydrogenase is inhibited by ${\alpha}$-ketoglutarate. However, our electrochemical $NAD^+$ regeneration procedure looks advantageous over the enzymatic procedure using NADH oxidase, from the viewpoint of reaction time to completion.

• Journal of Energy Engineering
• /
• v.28 no.4
• /
• pp.8-12
• /
• 2019

Thermal amine scrubbing is the most advanced CO₂ capture technique but its largescale application is hindered due to the large heat requirement during solvent regeneration step. The addition of a solid metal oxide catalysts can optimize the CO₂ desorption rate and thus minimize the energy consumption. Herein, we evaluate the solvent regeneration performance of Monoethanolamine (MEA) and Diethanolamine (DEA) solvents without and with two metal oxide catalysts (TiO₂ and V₂O₅) within a temperature range of 40-86℃. The solvent regeneration performance was evaluated in terms of CO₂ desorption rate and overall amount of CO₂ desorbed during the experiments. Both catalysts improved the solvent regeneration performance by desorbing greater amounts of CO₂ with higher CO₂ desorption rates at low temperature. Improvements of 86% and 50% in the CO₂ desorption rate were made by the catalysts for MEA and DEA solvents, respectively. The total amount of the desorbed CO₂ also improved by 17% and 13% from MEA and DEA solvents, respectively. The metal oxide catalyst-aided regeneration of amine solutions can be a new approach to minimize the heat requirement during solvent regeneration and thus can remove a primary shortfall of this technology.

• Horticultural Science & Technology
• /
• v.17 no.6
• /
• pp.765-767
• /
• 1999

Experiments were conducted to find out the optimum cultural conditions for adventitious shoot regeneration from leaf segments of Gypsophila paniculata L. Thidiazuron (TDZ) was remarkably effective for the regeneration of leaf segment in Gypsophila paniculata compared with BA and kinetin. TDZ showed the highest rate of regeneration at $3.0mg{\cdot}L^{-1}$, while kinetin did not affect the regeneration. BA in the medium increased vitrification. Shoot formation efficiency was much higher on $0.3mg{\cdot}L^{-1}$ of IAA-containing media than NAA-containing media. Regeneration of leaf segments was induced with the agar concentrations of 1.0, 1.2 and 1.6%. Dark treatment at the initial stage of the culture increased the rate of regeneration up to 75%. The leaf explants from the 3rd subcultured stock plants after meristem culture, showed the highest adventitious shoot regeneration efficiency.

• KSBB Journal
• /
• v.23 no.6
• /
• pp.474-478
• /
• 2008

UDP-glucose regeneration system using metabolic engineeringis unique and efficient strategy for oligosaccharide synthesis. To exploit the efficient UDP-glucose regeneration system, we introduced four enzymes, which would be important in partitioning the flux of UDP regenerationsuch as UDP-glucose pyrophosphorylase, UDP-Kinase gene, UDP-galactose 4-epimerase, and $\beta$-1, 4-galactasyltrasnsferase, into E. coli AD202. To determine the optimal expression level for UDP-regeneration, LacNAc concentration was compared depending on IPTG concentration. 0.5 mM IPTG induction showed the higher oligosaccharides synthesis. Using metabolic engineering under optimal IPTG induction, LacNAc synthesis of AD202/pQNGLU increased until 16 h and showed the 1.34 mM. This concentration is 10 times higher than that of control strain at same reaction time. Lactose of AD202/pQNGLU showed the maximum synthesis of 0.39 mM at 16 h and showed the 2.6 times higher than that of control strain.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.2
• /
• pp.57-66
• /
• 2009

In this paper, the steering characteristics of tracked vehicles are studied for the improvement of steering performance. The important design factor of military vehicles is high mobility. It is influenced by weight of a vehicle, engine capacity, power-train, and steering system. The military vehicle, which is equipped with caterpillar, has unique steering characteristics and is quite different from that of a wheeled vehicle. The steering of tracked vehicles is operated in the power pack due to different speeds of both sprockets. Under cornering conditions, power split and power regeneration are happened in the power pack. In case of power regeneration, power is transferred outside track after adding engine power and power inputted inside track from the ground. However, excessive power regeneration is transferred in the power pack. It damages mechanical elements. Therefore, it is necessary to analyze the steering system and check mentioned problem above. In this study, the detailed dynamic model of steering system is presented, which includes slippage between track and roadwheel, inertia force, and inertia moment. Finally, our model is compared with the Kitano model and we verified the validity of the model.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.8
• /
• pp.1151-1157
• /
• 2012

Ocean Thermal Energy Conversion(OTEC) technology is one of the new and renewable energy that utilizes the natural temperature gradient that exists in the tropical ocean between warm surface water and the deep cold water, to generate electricity. The selection of working fluid and the OTEC cycle greatly influence the effect on the system operation, and it's energy efficiency and impacts on the environment. Working fluids of the OTEC are ammonia, R22, R407C, and R410A. In this paper, we compared boiling pressure to optimize OTEC system at $25^{\circ}C$. Also, this paper showed net-power and efficiency according to working fluids for closed cycle and regeneration cycle.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.2
• /
• pp.80-86
• /
• 2008

Uncontrolled regeneration characteristics of two different type SiC DPFs(diesel particulate filters) were investigated by DPF test rig devised to facilitate DPF evaluation, especially for regeneration and MSL(maximum soot loading) test similar to engine dynamometer test. In order to estimate the limits of maximum filter temperature and temperature gradient causing filter fracture, such as crack or whitening, the temperature distributions inside the filter were measured by thermocouples. The maximum filter temperature was observed near the rear plane of central filter region due to heat accumulation by exothermic reaction of PM but the maximum temperature gradient occurred at the boundary of high filter temperature. These two parameters induced the different SiC DPFs to fracture with different modes, whitening and crack.

• Journal of Institute of Convergence Technology
• /
• v.1 no.2
• /
• pp.33-36
• /
• 2011

Ionic liquids based on formate and hydrogen carbonate anions were synthesized for use as solvents for the effective dissolution of cellulose and the regenerated cellulose was in the native lattice.

• Bulletin of the Korean Chemical Society
• /
• v.13 no.2
• /
• pp.184-187
• /
• 1992

Regeneration methods of oximes, hydrazones, and N,N-dimethylhydrazones to the related carbonyl compounds were effected using various dicarbonyl compounds which are activated with electron withdrawing substituents such as trifluoromethylated $\beta-diketones$, $\beta-acylpyruvates$, and $\alpha-diketones$ via an equilibrium exchange reaction. The chemical transformations of the dicarbonyl compounds in the exchange reaction were investigated by various spectroscopic methods.

• Proceedings of the Korean Society of Plant Biotechnology Conference
• /
• 2005.04a
• /
• pp.6-9
• /
• 2005

Plant biotechnology involving genetic modification has been rather controversial. However, the major issues related to safety are being addressed by continued improvements in technology. Some of the related facts will be highlighted to set the tone for a scientific discussion on the possibilities of using the technology for crop improvement. Our main research interest is to understand the molecular regulation of shoot bud regeneration in plant tissue culture, which is essential for crop improvement by biotechnology. We have isolated and characterized some genes that are associated with adventitious shoot regeneration. These include a MADS-box cDNA (PkMADS1) from paulownia kawakamii, which regulates vegetative shoot development and in vitro shoot regeneration from leaf explants. Another gene we have characterized from petunia codesfor a cytokinin binding protein (PETCBP). Preliminary functional analysis of this gene indicated that this also affects adventitious shoot bud initiation. Also, the antisense suppression of this gene in petunia causedexcessive branching. Results from our work and selected other publications will be used to highlight the possibilities of manipulation of such genes to improve crop species.