• Medical Lasers
• /
• v.9 no.2
• /
• pp.119-125
• /
• 2020

Photobiomodulation forms the basis of photomedicine and is defined as the effect of coherent or non-coherent light sources, such as low-level lasers and light-emitting diodes, on cells and tissues. This treatment technique affects cell functions, proliferation, and migration, and plays an important role in tissue regeneration. Mesenchymal stem cells (MSCs) are known to be beneficial for tissue regeneration, and the combination of stem cell therapy and laser therapy appears to positively affect treatment outcomes. In general, a low-power laser has a positive effect on MSCs, thereby facilitating improvements in different disease models. This study elucidates the mechanisms and effects of low-power laser irradiation on the proliferation, migration, and differentiation of various MSCs that have been examined in different studies.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.8
• /
• pp.1151-1157
• /
• 2012

Ocean Thermal Energy Conversion(OTEC) technology is one of the new and renewable energy that utilizes the natural temperature gradient that exists in the tropical ocean between warm surface water and the deep cold water, to generate electricity. The selection of working fluid and the OTEC cycle greatly influence the effect on the system operation, and it's energy efficiency and impacts on the environment. Working fluids of the OTEC are ammonia, R22, R407C, and R410A. In this paper, we compared boiling pressure to optimize OTEC system at $25^{\circ}C$. Also, this paper showed net-power and efficiency according to working fluids for closed cycle and regeneration cycle.

• Journal of Drive and Control
• /
• v.7 no.2
• /
• pp.25-32
• /
• 2010

• Journal of Drive and Control
• /
• v.7 no.2
• /
• pp.12-18
• /
• 2010

• The Journal of Pediatrics of Korean Medicine
• /
• v.32 no.3
• /
• pp.90-99
• /
• 2018

Objectives Hwangnyeonhaedok-tang is a Korean herbal medical treatment that removes toxic heat, fever and inflammation. The purpose of this study was to investigate the effect of Hwangnyeonhaedok-tang treatment on the relief of atopic dermatitis (AD) through regeneration of skin lipid barrier. Methods Male NC/Nga mice (20 g, 6 week age) were used. Each 10 mice were allocated to the control group (Ctrl), the AD-induced with no treatment group (AE), and the group which induced AD after administering Hwangnyeonhaedok-tang extract (HT). To induce AD-like skin lesions, sodium dodecyl sulfate (SDS) (Sigma-Aldrich, USA) was rubbed on the back of each mouse to remove the lipid lamella of the stratum corneum, and Dermatophagoides (D.) farinae crude extract was applied. HT group was orally administered Hwangnyeonhaedok-tang after induction of AD. IL-4 IL-13, $p-I{\kappa}B$, iNOS, Sudan Black B (SB), loricrin, and filaggrin were observed to confirm the effect. Results In HT group, AD skin score was decreased by 46%. The cytokine IL-4 and IL-13, which can identify Th2 differentiation, was reduced by 73% and 58% each. Anti-inflammatory effects were observed in $p-I{\kappa}B$ and iNOS by 69% and 54%, respectively. Finally, SB showed that the regeneration of the lipid layer and the increase of the regeneration power of loricrin and filaggrin were increased by 437% and 464%, respectively. Conclusions From the study result, we observed that Hwangnyeonhaedok-tang treatment alleviates AD by decreasing skin score, reducing Th2 differentiation, inducing anti-inflammatory, and increasing skin lipid barrier regeneration. Thus, Hwangnyeonhaedok-tang treatment would be considered as an effective AD relieving treatment.

• KIEAE Journal
• /
• v.9 no.5
• /
• pp.85-96
• /
• 2009

This study analyzed a characteristic by types of urban regeneration helping the establishment of urban identity under social condition change. It will be foundation of sustainable urban development with strategy that secures world-wide competitive power. For this, sample cases that established identity from urban regeneration were reviewed about the main subject and the supporting subject in business side and hardware, software, system, and finance in design factors. 4samples each in inheritance intensification type and change creation type were selected and analyzed. The result said it is most effective to establish urban identity when inheritance intensification type is the private-centered for urban regeneration. And it is better to do the project that the main subject and the supporting subject are taken by the private or the private-leading partnership. It is necessary to manage the region and plan events with software design factors more than hardware design factors. In addition, for urban identity, it was found to be desirable to utilize and preserve fully current resources such as historical scenery and activate the communities than making new facilities. On the contrary, the project based on change creation type needs to be under the public management with innovative idea. Also, when it comes to design factors, facilities related to culture and art and community spaces should open and run actively. It is important for the region to improve its image by New design style such as TOD. In software side, it is important to manage the region by monitoring about urban regeneration business and solve social mix and employment problem. On the other hand, in terms of system and administration, both types don't show a difference in urban identity establishment, since it is same that both should make partnership and get a support of subsidy to be most effective.

• KEPCO Journal on Electric Power and Energy
• /
• v.4 no.1
• /
• pp.33-38
• /
• 2018

This study applied upgrades to the processes of a 10 MW wet amine $CO_2$ capture pilot plant and conducted performance evaluation. The 10 MW $CO_2$ Capture Pilot Plant is a facility that applies 1/50 of the combustion flue gas produced from a 500 MW coal-fired power plant, and is capable of capturing up to 200 tons of $CO_2$. This study aimed to quantitatively measure efficiency improvements of post-combustion $CO_2$ capture facilities resulting from process upgrades to propose reliable data for the first time in Korea. The key components of the process upgrades involve absorber intercooling, lean/rich amine exchanger efficiency improvements, reboiler steam TVR (Thermal Vapor Recompression), and lean amine MVR (Mechanical Vapor Recompression). The components were sequentially applied to test the energy reduction effect of each component. In addition, the performance evaluation was conducted with the absorber $CO_2$ removal efficiency maintained at the performance evaluation standard value proposed by the IEA-GHG ($CO_2$ removal rate: 90%). The absorbent used in the study was the highly efficient KoSol-5 that was developed by KEPCO (Korea Electric Power Corporation). From the performance evaluation results, it was found that the steam consumption (regeneration energy) for the regeneration of the absorbent decreased by $0.38GJ/tonCO_2$ after applying the process upgrades: from $2.93GJ/ton\;CO_2$ to $2.55GJ/tonCO_2$. This study confirmed the excellent performance of the post-combustion wet $CO_2$ capture process developed by KEPCO Research Institute (KEPRI) within KEPCO, and the process upgrades validated in this study are expected to substantially reduce $CO_2$ capture costs when applied in demonstration $CO_2$ capture plants.

• Korean Chemical Engineering Research
• /
• v.61 no.3
• /
• pp.368-377
• /
• 2023

Natural Gas Combined Cycle(NGCC) recently receives lots of attention as an attractive form of power plants by virtue of its low carbon emission compared with coal-fired power plant. Nevertheless, it also needs carbon capture process since it is difficult to completely suppress carbon emission even for the NGCC. A simulation study has been performed to optimize operating condition of a carbon capture process using MEA considering low partial pressure of carbon dioxide in NGCC emission gas. For accurate optimization, overall process model including both NGCC and the carbon capture process has been built with a simulation software. Then, optimization in which various performance indices such as carbon dioxide absorption rate, solvent regeneration rate and power loss in the NGCC are simultaneously reflected has been done. Especially, it is noticeable that this study focuses on not only the amount of energy consumption but also the absorption and regeneration performance of carbon capture process. The best result considering all the performance indices has been achieved when the reboiler temperature is 120 ℃ and the reason has been analyzed.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.5 no.4
• /
• pp.1-9
• /
• 2008

In this paper, an energy regeneration algorithm is proposed to make the maximum use of the regenerative braking energy for a parallel hybrid electric vehicle(HEV) equipped with a continuous variable transmission(CVT). The regenerative algorithm is developed by considering the battery state of charge(SOC), vehicle velocity and motor capacity. The hydraulic module consists of a reducing valve and a power unit to supply the front wheel brake pressure according to the control algorithm. In order to evaluate the performance of the regenerative braking algorithm and the hydraulic module, a hardware-in-the-loop simulation (HILS) is performed. In the HILS system, the brake system consists of four wheel brakes and the hydraulic module. Dynamic characteristics of the HEV are simulated using an HEV simulator. In the HEV simulator, each element of the HEV powertrain such as internal combustion engine, motor, battery and CVT is modelled using MATLAB/$Simulink^{(R)}$. In the HILS, a driver operates the brake pedal with his or her foot while the vehicle speed is displayed on the monitor in real time. It is found from the HILS that the regenerative braking algorithm and the hydraulic module suggested in this paper provide a satisfactory braking performance in tracking the driving schedule and maintaining the battery state of charge.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.158-166
• /
• 2018

Contrary to urban development, urban regeneration is a process of land development through conservation, restoration, and management. In particular, ecologically based urban regeneration is an attempt to improve the quality of life in an area, establish a stable settlement space, and revitalize the local economy by considering the ecological environment. In this regard, the objectives of this study were to establish theoretical concepts and analyze the successful foreign cases of ecologically based urban regeneration, and propose a direction of socio-economic regeneration along with the physical-environmental regeneration of urban areas in Korea. The study results suggest the following. First, strategies must be developed to coordinate public transportation, such as buses and subways, by considering the importance of bicycle riders, along with the sustainable-commuting system. Second, both the importance of planning parks and trails around water systems in various scales while maintaining the existing natural environment as well as using natural elements, such as electric vehicles and wind-power generation systems, were emphasized. Third, urban regeneration for increased energy efficiency requires specific architectural planning and facilities. Fourth, education and research for easy access by the public, as well as public-private partnership, will be needed in the regeneration process.