• 한국정보처리학회논문지
• /
• 제7권7호
• /
• pp.2116-2124
• /
• 2000

본 논문에서는 퍼지 모델과 유진 알고리즘을 이용한 쓰레기 소각로의 언소 제어를 제안한다. 먼저 복잡하고 비선형 시스템인 소각로의 퍼지 모델을 얻기 위해 퍼지 모델링이 수행된다. 얻어진 퍼지 모델은 주어지는 입력에 대해 소각로의 출력을 예측한다. 그리고 유전 알고리즘을 이용하여 원하는 소각로 츨려에 대해 모든 가능한 해 집합 안에서 최적 제어입력 값을 탐색하고 얻어진 최적 제어입력은 소각로에 인가되어 제어가 행해진다. 제안된 방법의 성능을 평가하기 휘해, 증발량을 출력으로 하는 소각로 연소제어의 컴퓨터 시뮬레이션이 수행되었다. 그 결과, 소각로의 퍼지 모델의 성능 평가지수 ISE(오차제곱 적분)는 0015로 매우 작았으며, 연소제어 시 증발량은 설정값 주위에서 일정하게 유지되고, 제안된 방법에 의한 성능지수 ITAE는 352로 수동운전에 의한 결과 1275보다 우수하였다.

• 한국지반공학회지:지반
• /
• 제13권2호
• /
• pp.65-76
• /
• 1997

난지도 쓰레기 매립지 뿐만 아니라 대도시 주변 매립지의 사후활용 방안에 대한 관심이 점차로 고조되고 있다. 본 논문에서는 난지도 쓰레기 매립지에서 2년여간 계측된 침하자료를 분석하여 침하양상을 규명하고자 하였다. 침하분석결과 난지도 쓰레기 매립지의 침하양상은 미국내 24개 매립지에 대해 분석된 침하경향과 유사함을 알 수 있었다. 계측된 침하자료에 대한 해석을 근거로 할 경우, Bjarngard와 Edgers의 침하모델이 난지도 매립지의 장기침하량 예측에 적합한 것으로 사료된다. 10년 후 장기침하량을 예측할 때 Bjarngard와 Edgers의 침하모델은 Power Creep Model과 상당한 예측의 차이를 보였다. 난지도 쓰레기 매립지 침하양상에 대한 분석이 이루어지지 않은 상황에서 단지 기존의 침하모델만을 사용하는 것은 장기침하량 예측시 상당한 오류를 범할 수 있음을 알 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2615-2620
• /
• 2007

This paper describes on pressure drop in a circular pipe of refuse collecting system. The flow characteristics inside the circular pipe are analyzed by three-dimensional Navier-Stokes analysis. In numerical analysis, an organic waste is modeled using the data obtained by site survey. Pressure drop obtained by numerical simulation is compared to the value obtained by experimental measurements for the two kinds of pipe; straight and bended type. The pressure drop obtained by numerical simulation has a good agreement with that of experiments. It is noted that the accurate prediction of pressure drop in the waste pipe is very important to determine the performance of turbo blower used in making a suction pressure in the waste pipe. Especially, the pressure drop for an organic waste is analyzed according to the mass flow rate of waste.

• 제어로봇시스템학회논문지
• /
• 제8권7호
• /
• pp.556-562
• /
• 2002

This paper studies the identification of a combustion model, which is used to design a linear controller of a steam generation quantity and harmful exhaust gases of a Refuse Incineration Plant(RIP). Even though the RIP has strong nonlinearities and complexities, it is identified as a MIMO parametric ARX model from experimental input-output data sets. Unknown model parameters are decided from experimental input-output data sets, using system identification algorithm based on Instrumental Variables(IV) method. It is shown that the identified model well approximates the input-output combustion characteristics.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.187.1-187.1
• /
• 2011

RDF(Refuse-Derived Fuel) is a fuel of pelletized form made of combustible solid wastes and can not only be used as alternative energy to fossil fuel but also solve troubles in thermal uses of incinerator. As the first stage for obtaining elementary data required to develop criteria of raw materials appropriate to RDF combustion facilities actively spread recently in Korea, preliminary experiments were conducted on CO, SOx, NOx and HCl production and reduction characteristics in combustion of RDF. RDF samples weighing 2~3 g per a sample were manufactured in a lab-scale way and combustion tests of RDF were carried out in electric furnace with quartz tube of 50 mm inside diameter.

• 대한기계학회논문집B
• /
• 제24권3호
• /
• pp.354-362
• /
• 2000

This paper identifies a discrete-time linear combustion model of Refuse Incineration Plant(RIP) which characterizes steam generation quantity, where the RIP is considered as a MIMO system with thirteen-inputs and one-output. The structure of RIP model is described as an ARX model which are analytically obtained from the combustion dynamics. Furthermore, using the Instrumental Variable(IV) identification algorithm, model structure and unknown parameters are identified from experimental input-output data sets, In result, it is shown that the identified ARX model well approximates the input-output combustion characteristics given by experimental data sets.

• 동력기계공학회지
• /
• 제3권2호
• /
• pp.34-41
• /
• 1999

This paper identifies a linear combustion model of Refuse Incineration Plant(RIP) which characterizes its combustion dynamics, where the proposed model has thirteen-inputs and one-output. The structure of the RIP model is given as an ARX model which obtained from the theoretical analysis. And then, some unknown model parameters are decided from experimental input-output data sets, using system identification algorithm based on Instrumental Variables(IV) method. In result, it is shown that the proposed model well approximates the input-output combustion characteristics riven by experimental data sets.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.613-616
• /
• 2007

A pilot scale circulating fluidized bed for refuse derived fuel is developed and constructed in order to demonstrate efficient and safe utilization of waste fuel. The capacity of the facility is 8 steam tons per hour with the steam quality of $450^{\circ}C$ and 38atm. The quantity and the quality of the produced steam is sufficient to produce 1MWe power capacity. The test operation proved the high combustion efficiency of 99% and up. The emissions of NOx, SOx in flue gas are below 100, 60ppm respectively with out any emission control. HCl emissions were above 400ppm at the combustor exit but reduced below 10ppm after scrubber.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 1996년도 사용종료 매립지의 안정화 에 관한 국제 세미나
• /
• pp.97-101
• /
• 1996

Municipal and sanitary landfills can pose environmental problems due to leachate, landfill gas md unstable geotechnical properties. Most governmental bodies delay the correction of landfill problems or landfill replacement until a crises stage is reached. The replacement of a landfill is often made difficult due to costly regulatory controls, public opposition to siting and the high cost of closure for the previous landfill unit. Solutions to extending landfill life and capacity Involve waste minimization by recycling, refuse compaction and waste-to-energy incineration. Incineration can reduce the volume of refuse by 50-95%. The largest installed bases of municipal waste Incinerators are located in Japan and the U.S. The volume of waste contained in a landfill can be estimated by load count tabulations, weight-and-volume measurements or a material balance analysis based on the trash profile of user categories. for an existing landfill, core samples may be collected and analyzed for use in a material balance analysis. Newly generated refuse contains approximately 50% of the heating value of coal. However, landfill properties vary significantly due to the waste profile of the contributors and biodegradation due to time and weathering. The volume of the Nanji-do landfill

• 한국안전학회지
• /
• 제15권2호
• /
• pp.97-102
• /
• 2000

This paper presents the design, construction and performance of ground treatment to support road embankment on refuse landfill. Long-term settlement of refuse landfill is analysised by Sower and Yen/scanlon. As a results of site test, predicting settlement excess the allowable settlement and ultimate bearing capacity is not satisfied. The effectiveness of DDR(Deep Dynamic Replacement) is monitered by field tests (SPT, PBT, PMT) before, during and after construction of the stone columns. The ultimate bearing capacity for reinforced landfill by stone columns obtained from the in-situ test results has been compared with the existing theories. In municipal wastes landfill, settlement after treatment using stone column is satisfied to allowable residual settlement. Therefore, long-term stability can be gain in these cases.