• Journal of the Korean Ceramic Society
• /
• v.11 no.1
• /
• pp.19-22
• /
• 1974

The andalusite that can be found in mica shist near YunChun deposits were studied by means of an optical microscope, X-ray diffraction, thermal analysis of DTA and TGA, chemical analysis and refractoriness test to find out an appropriate method of concentration and purification for the utilization as a raw material of high alumina refractories, with the results: 1. The andalusite are has chiefly contained andalusite, muscovite and biotitei in addition to small amounts of chlorite, kyanite, disapore, quartz, alumandite adn pyrite, which vary from sample to sample. 2. Most of andalusite have occurred as light-red colored columns which are estimated to be an average of 4 by 0.5m/m in length. 3. Samples of andalusite which were dressed by cobbing and hand picking in the deposits have contained an average of 42% andalusite.

• Journal of the Korean Ceramic Society
• /
• v.23 no.5
• /
• pp.86-92
• /
• 1986

As there is a growing trend to make high quality steel improving production efficiency and utilizing slag as resources the technologies of hot metal pretreatment have been progressed to meet these demands. Although mill scale $Na_2CO_3$ and CaO used as fluxes proved to be excellent agents then can severely corrode refractories such as chamotte and high alumina for torpedo or open ladle car. Thus it was considered necessary to develop new refractories which can endure suchy conditions. Desulfurization fluxes vastly used in POSCO are $CaCO_3$ and CaO Recent trials have been made by testing phenol resin bonded $Al_2O_3-SiC-C$ bricks in torpedo ladle car for hot metal pretreatment. The results showed that the life of this brick became about 1.2 times longer than that of foreign products. And the crushing strength M.O.R corrosion resistance and oxidation resistance were tested.

• Journal of the Korean Ceramic Society
• /
• v.11 no.3
• /
• pp.33-38
• /
• 1974

The possibility of the sources for the manufacture of mullite-rich refractories from the modified domestic alunite was studied. The modifying method of alunite studied were performed by calcination, wet ballmilling, and washing with water. For synthesis of mullite-rich refractories, the modified alunite with the addition of alumina and Fe2O3 as mineralizer was fired at 1350$^{\circ}$-155$0^{\circ}C$, and the following results were obtained: 1) The suitable firing temperature range was 1450$^{\circ}$-150$0^{\circ}C$, and adequate amounts of Al2O3 and Fe2O3 were below 30% and 3~4%, respectively. 2) Thermal expansion coefficient proportional to heating temperature was about 5$\times$10-6~10$\times$10-6cm/cm.deg. 3) The mineralogical compositions of the sintered specimens were found as mainly mullite and corundum.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2000.04a
• /
• pp.115.2-115.2
• /
• 2000

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.1
• /
• pp.40-46
• /
• 2024

A novel approach is presented to address issues associated with the use of strong acidic solutions for the leaching of magnesium oxide (MgO) from spent magnesia-carbon refractories. An ultrasonic flotation and separation process is employed, with a mildly acidic solvent, acetic acid, used to selectively chelate MgO from the spent refractories. When using 2 M acetic acid as a solvent, the recovery of the graphite exhibited 99.7 % with high purity of 72.7 %, showing a significant improvement compared to using water as the solvent. Furthermore, the technology presented in this study offers a method for producing magnesium acetate through the reaction of MgO in spent refractory with acetic acid, providing a means for the purification and separation of graphite.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.196-196
• /
• 2003

• Proceedings of the Korean Ceranic Society Conference
• /
• 2000.04a
• /
• pp.107.2-107.2
• /
• 2000

• Proceedings of the Korean Ceranic Society Conference
• /
• 2002.10a
• /
• pp.155.2-155
• /
• 2002

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2017.05a
• /
• pp.69-70
• /
• 2017

• Korean Journal of Materials Research
• /
• v.19 no.2
• /
• pp.115-118
• /
• 2009

The use of dolomite refractories has increased during the past several years in the manufacturing of clean steel during the stainless steelmaking process. However, at the same time, the use of dolomite refractories has led to what is known as the skull formation. In the present work, to understand the skull formation, the wetting characteristics of dolomite substrates by liquid Fe-19wt%Cr-10wt%Ni alloys in various oxygen partial pressures were initially investigated at 1753K using the sessile drop technique. For comparison, the wetting characteristics of alumina substrates were investigated with the same technique. It was found that the wetting index, (1+$cos{\theta}$), of dolomite is approximately 40% higher compared to those of alumina. In addition, the oxygen partial pressure to generate the surface oxide, which may capture the liquid metal on the refractory surface, for dolomite is much lower than that for alumina. From this study, it was concluded that the use of dolomite is much more closely associated with the skull formation compared to the use of alumina due to the stronger wettability and the surface oxide formation at a lower oxygen partial pressure of dolomite.