• Proceedings of the KWS Conference
• /
• 2003.05a
• /
• pp.193-195
• /
• 2003

Micro-structure and shear properties with reflow conditions, reflow temperature and time, for In-48Sn solder on BGA package were examined at the temperature between 140 and 170$^{\circ}C$ for 10 to 3600sec. With increasing reflow temperature and time, the thickness of intermetallic compound formed between solder and pad increased. Shear test indicated shear force increased in the range to a critical value of reflow time, and decreased over a critical reflow time. With increasing reflow temperature and time, the crater occurred on fracture surface because of a increase of crater by voids and IMC particles precipitated in solder.

• Journal of the Semiconductor & Display Technology
• /
• v.5 no.3 s.16
• /
• pp.29-32
• /
• 2006

Because of new requirements related to the employment of SMT(Surface Mounting Technology) manufacturing and the diversity of components on high density PCB(Printed Circuit Boards), Thermal control of the reflow process is required in order to achieve acceptable yields and reliability of SMT assemblies. Accurate control of the temperature distribution during the reflow process is one of the major requirements, especially in lead-free assembly. This study has been performed for reflow process using the commercial CFD(Computational Fluid Dynamics) tool for predicting flow and temperature distributions. Porous plate was installed to prevent leakage flow which was one of the major problem of temperature uniformity in the reflow process. There is a separation region where the flow is turned. Outside wall made of porous plate is to prevent and minimize separation region for acquiring uniform temperature during operation. This paper provided design concept from CFD results of the steady state temperature distribution and flow field inside a reflow oven.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.561-564
• /
• 2006

Because of new requirements related to the employment of SMT(Surface Mounting Technology) manufacturing and the diversity of components on high density PCB(printed circuit boards), Thermal control of the reflow process is required in oder to achieve acceptable yields and reliability of SMT assemblies. Accurate control of the temperature distribution during the reflow process is one of the major requirements, especially in lead-free assembly. This study has been performed for reflow process using the commercial CFD tool(Fluent) for predicting flow and temperature distributions. There was flow recirculation region that had a weak point in the temperature uniformity. Porous plate was installed to prevent and minimize flow recirculation region for acquiring uniform temperature in oven. This paper provided design concept from CFD results of the steady state temperature distribution and flow field inside a reflow oven.

• Korean Journal of Materials Research
• /
• v.9 no.5
• /
• pp.538-543
• /
• 1999

The theory of the reflow applied to metallization process was studied, and the factors affecting the reflow and the relation between the reflow and the grain growth were investigated. The driving force for the metal reflow is the difference in chemical potentials along the metal surface, and it causes the atom movement. On condition that metal interconnect is fabricated for semiconductor devices, surface diffusion is the primary atom movement mechanism. The metal reflow is influenced by reflow temperature, reflow time, reflow ambient, thin film thickness, thin film material, underlayer material, pattern size, and aspect ratio. It is supposed that the reflow characteristic varies according to the grain growth during the reflow, so the effect of the grain growth on the reflow should be considered.

• Journal of the Korean institute of surface engineering
• /
• v.38 no.1
• /
• pp.28-36
• /
• 2005

In this study, the reflow characteristics of copper thin films which is expected to be used as interconnection materials in the next generation semiconductor devices were investigated. Cu thin films were deposited on the TaN diffusion barrier by metal organic chemical vapor deposition (MOCVD) and annealed at the temperature between 250℃ and 550℃ in various ambient gases. When the Cu thin films were annealed in the hydrogen ambience compared with oxygen ambience, sheet resistance of Cu thin films decreased and the breakdown of TaN diffusion barrier was not occurred and a stable Cu/TaN/Si structure was formed at the annealing temperature of 450℃. In addition, reflow properties of Cu thin films could be enhanced in H₂ ambient. With Cu reflow process, we could fill the trench patterns of 0.16～0.24 11m with aspect ratio of 4.17～6.25 at the annealing temperature of 450℃ in hydrogen ambience. It is expected that Cu reflow process will be applied to fill the deep pattern with ultra fine structure in metallization.

• Korean Journal of Optics and Photonics
• /
• v.20 no.2
• /
• pp.118-122
• /
• 2009

An optical sheet with microlens array (MLA) is designed and fabricated as a substitute for the prism sheets of LCD backlight. Using photoresist thermal reflow, MLAs were fabricated on PET film with thickness of $100{\mu}m$, and we measured the change of MLA profile in terms of exposure time, reflow temperature and reflow time.

• Proceedings of the KWS Conference
• /
• 2006.05a
• /
• pp.36-38
• /
• 2006

We investigated that the metallurgical, mechanical and electrical properties of the Sn-3.SAg/Cu ball grid array (BGA) solder joints at a reflow temperature of $255^{\circ}C$ for different reflow times of 10, 60, 300 and 1800 s. Two different intermetallic compound (IMC) layers, consisting of scallop-shaped $Cu_6Sn_5$ and very thin $Cu_3Sn$, formed at the solder/substrate interface, and their thicknesses increased with increasing reflow time. The shear force peaked after reflow for 60 s, and then significantly decreased with increasing reflow time. The fracture occurred along the solder ball in the initial reflow, but the fraction of the brittle fracture increased with increasing reflow time. The IMC growth and the volume of Cu dissolved in the solder balls affected the electrical property.

• Journal of the Korean institute of surface engineering
• /
• v.39 no.6
• /
• pp.255-262
• /
• 2006

Pd-Cu alloy membrane for hydrogen separation was fabricated by sputtering and Cu reflow process. At first, the Pd and Cu was continuously deposited by sputtering method on oxidized Si support, the Cu reflow process was followed. Microstructure of the surface and permeability of the membrane was investigated depending on various reflow temperature, time, Pd/cu composition and supports. With respect to our result, Pd-Cu thin film (90 wt.% Pd/10 wt.% Cu) deposited by sputtering process with thickness of $2{\mu}m$ was heat-treated for Cu reflow The voids of the membrane surface were completely filled and the dense crystal surface was formed by Cu reflow behavior at $700^{\circ}C$ for 1 hour. Cu reflow process, which is adopted for our work, could be applied to fabrication of dense Pd-alloy membrane for hydrogen separation regardless of supports. Ceramic or metal support could be easily used for the membrane fabricated by reflow process. The Cu reflow process must result in void-free surface and dense crystalline of Pd-alloy membrane, which is responsible for improved selectivity oi the membrane.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.1
• /
• pp.17-24
• /
• 2012

Recently, flip chip interconnection has been increasingly used in microelectronic assemblies. The common Flip chip interconnection is formed by reflow of the solder bumps. Lead-Tin solders and Tin-based solders are most widely used for the solder bump materials. However, the flip chip interconnection using these solder materials cannot be applied to temperature-sensitive components since solder reflow is performed at relatively high temperature. Therefore the development of low temperature bonding technologies is required in these applications. A few bonding techniques at low temperature of $150^{\circ}C$ or below have been reported. They include the reflow soldering using low melting point solder bumps, the transient liquid phase bonding by inter-diffusion between two solders, and the bonding using low temperature curable adhesive. This paper reviews various low temperature bonding methods.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2000.04a
• /
• pp.17-17
• /
• 2000

The issue of reflow profiling continues to be a complex topic. The pains often associated with profiling can be reduced greatly if certain guidelines are followed and if there is a strong understanding of the variables that can be encountered during the reflow process. This paper shall discuss the appropriate guidelines and trouble shooting methods for reflow profiling, and in particular shall focus upon the benefits of implementing the linear ramp-to-spike profile. Delta T(T) is defined as the variation of temperature found on an assembly during the reflow process. Too large of a T can result in soldering defects, so to combat T a Ramp-Soak-Spike(RSS) reflow profile often is utilized. However, when using a newer-style reflow oven, the T often is minimized or eliminated, thus, the soak zone of the reflow profile becomes an unnecessary step. Because of this, the implementation of a linear Ramp-To-Spike(RTS) reflow profile should be considered. Benefits such as reduced energy costs, reduced solder defects, increased efficiency, improved wetting, and a simplification of the reflow profile process may be experienced when using the RTS profile. Included in this paper are the suggested process parameters for setting up the RSS and RTS profiles and the chemical and metallurgical reactions that occur at each set point of these profiles. The paper concludes with a discussion and pictures of several profile-related defects. Each of these defects is described, analyzed, and instructions are given for troublshooting these defects.