• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.63-68
• /
• 2004

Since rotor position information is necessary to drive the SRM, absolute-encoder, resolver and incremental-encoder is used to detect a poor position. But, it is not desirable to use a high priced encoder and high efficient microprocessor under the condition of the simple driving system when precision control is not demanded. In this paper, Only using the reflective type 2 photosensors replace the conventional opto interrupter and slotted disk, which not only remove a slotted disk section but drive 3-phase 6/4 SRM bidirectionally. Moreover, as control circuit only is composed of common analog device economy is maximized.

• 한국전기전자재료학회논문지
• /
• 제21권5호
• /
• pp.474-480
• /
• 2008

In order to make full color cholesteric displays, color filter-less R, G, B sub-pixel structured cholesteric LC cells have been studied. To make R, G, B colors, UV induced pitch variant chiral dopant was added to cholesteric LC mixtures. The concentration of the photo-sensitive chiral dopant was adjusted so that the initial state showed blue color and the color was changed from blue to green and red with increase of UV irradiation to the cholesteric cells. To prevent the mixing of R, G, B reflective sub-pixel liquid crystals, separation walls were formed using negative photo resister in boundary area between sub-pixels, Through the optimization of the material concentrations and UV irradiation condition, vivid R, G, B colors were achieved.

• 한국의류학회지
• /
• 제21권2호
• /
• pp.455-470
• /
• 1997

The importance of uniform is getting increased in the present society because it is one of symbols which represent a company and give customers the image of it. Uniform shows the kind of companies, one's position, and sometimes the actual job which one does. And workers who put on the same kind of uniform feel companionship among them, the security of their position and responsibility for their job, all of which elevate the efficiency of their job and the company. To enhance the functions of uniforms such as representativeness, esthetics, convenience and economization, the followings were studied. 1) Through survey on the present condition of seven different types of company uniforms, we analyzed preference of workers, staffs and consumers and did the factor analysis of uniform constitution. 2) It presented the relative importance among the uniform constitution. 3) The reflective condition of the uniform constitution was estimated. 4) It investigated the working condition and working movement.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.822-825
• /
• 2006

We propose a transflective In-Plane Switching mode in which patterned retarder is placed only on the reflective area of the upper substrate side. By selecting optic axes of Half Wavelength Plate and Liquid Crystal as 24 and 90 degree with respect to polarizer, condition of low reflectance for visible wavelength range at black state is found.

• 농업과학연구
• /
• 제41권4호
• /
• pp.283-290
• /
• 2014

This experiment had been conducted to determine optimal culture conditions for the growth and cut flowers of Calla (Zantedeschia 'Black Magic' 'Golden Affair') in highlands. Tubers of calla 'Black Magic' was treated with 0, 100, and $200mg{\cdot}L^{-1}$ concentration of $GA_3$. ABA content in tubers and roots were twice higher ($20-25pmol{\cdot}mL^{-1}$) in control than in $GA_3$ treated tubers and roots. ABA contents in tubers was not consistent but ABA contents in roots increased with increasing $GA_3$ concentration. However ABA is in inverse proportion to GA. It was mean that GA of high contents was ABA of low contents. Calla 'Golden Affair' was treated with different mulching materials (Control, black PE, Reflective film, Rice hull) and $GA_3$ concentrations (0, 50, 100 and $200mg{\cdot}L^{-1}$). It was largest in the length of flower at mulching of reflective film, Rice hull and it was greatest in the number of cut flowers at the treated with $200mg{\cdot}L^{-1}$ $GA_3$, Therefore the proper condition was at $200mg{\cdot}L^{-1}$ $GA_3$ with reflective film mulching.

• 한국전기전자재료학회논문지
• /
• 제25권6호
• /
• pp.451-455
• /
• 2012

To compare an electrical and optical characteristics of indium tin oxide (ITO) and carbon nanotube (CNT) electrode on flexible and reflective display, we fabricate two charged particle-type display panels under the same panel condition of which the width of ribs is 10 ${\mu}m$, the cell size is $300{\mu}m{\times}300{\mu}m$, the q/m value of the white particles is -4.3 ${\mu}C/g$ and that for the black is +1.3 ${\mu}C/g$, and the cell gap is 75 ${\mu}m$, 125 ${\mu}m$, and 175 ${\mu}m$. We use plastic substrates coated with ITO and CNT electrode. To evaluate optical property, we measure a response time of particles using a laser and a photodiode. Threshold and driving voltages of CNT electrode according to the sheet resistance of 300, 600, 1,000 (ohm/sq) are compared with ITO electrode of 10 (ohm/sq). A response time of the CNT panel is similar to that of ITO panel, but the threshold and driving voltages of CNT panel are higher than that of ITO panel, inducing a large bombardment of the particles and shortening the lifetime of the panel. High difference of a threshold and a driving voltage of CNT panel will induce an particle clumping, resulting degradation of the panel. A bending radius of the fabricated CNT panel is 18 ${\mu}m$.

• 설비공학논문집
• /
• 제28권9호
• /
• pp.350-354
• /
• 2016

Although fibrous insulations are generally used with resistive insulation type, metallic insulation is proper matter to satisfy low head-loss and equipment life when considering the specific condition, especially for Nuclear power plant. Common insulation is resistance insulation with a low thermal conductivity. but RMI is made of sheet plate with low emissivity and closed air space. Thermal radiation is blocked by stainless steel with low emissivity. Thermal conductivity and thermal convection are blocked by closed air space. This study shows the changes and effects of the heat loss according to shape and method of stacking sheet plates inserted into the insulation and analyzed the most optimized way for thermal insulation performance. The result shows that using sheet plate structure through raised and protruding shape processing was the appropriate model to optimize thermal performance. Additionally, insulating performance of RMI improved by placing the sheet plate in a high temperature region intensively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.394-395
• /
• 2007

In order to make full color cholesteric displays, color filter-less R, G, B sub-pixel structured cholesteric LC cells have been studied. To make R, G, B colors, UV induced pitch variant chiral dopant was added to cholesteric LC mixtures. The concentration of the photo-sensitive chiral dopant was adjusted so that the initial state showed blue color and the color was changed from blue to green and red with increase of UV irradiation to the cholesteric cells. To prevent the mixing of R, G, B reflective sub-pixel liquid crystals, separation walls were formed using negative photo resister in boundary area between sub-pixels. Through the optimization of the material concentrations and UV irradiation condition, vivid R, G, B colors were achieved.

• Coupled systems mechanics
• /
• 제12권4호
• /
• pp.365-389
• /
• 2023

Dynamic analysis of a typical concrete gravity dam-reservoir system is formulated by FE-(FE-TE) approach (i.e., Finite Element-(Finite Element-Truncation Element)). In this technique, dam and reservoir are discretized by plane solid and fluid finite elements. Moreover, the H-W (i.e., Hagstrom-Warburton) high-order condition imposed at the reservoir truncation boundary. This task is formulated by employing a truncation element at that boundary. It is emphasized that reservoir far-field is excluded from the discretized model. The formulation is initially reviewed which was originally proposed in a previous study. Thereafter, the response of Pine Flat dam-reservoir system is studied due to horizontal and vertical ground motions for two types of reservoir bottom conditions of full reflective and absorptive. It should be emphasized that study is carried out under high order of H-W condition applied on the truncation boundary. The initial part of study is focused on the time harmonic analysis. In this part, it is possible to compare the transfer functions against corresponding responses obtained by FE-(FE-HE) approach (referred to as exact method). Subsequently, the transient analysis is carried out. In that part, it is only possible to compare the results for low and high normalized reservoir length cases. Therefore, the sensitivity of results is controlled due to normalized reservoir length values.

• 한국진공학회지
• /
• 제19권2호
• /
• pp.148-154
• /
• 2010

본 논문에서는 유기발광다이오드의 보호막 적용을 위하여 TCP-CVD를 이용한 실리콘 산화막 형성에서 산화막의 특성에 영향을 미치는 Power, 가스종류 및 유량, 소스와 기판거리 및 공정온도 등의 공정조건에 따른 증착된 산화막의 특성을 나타내는 증착률, 굴절률을 제어하고자 한다. 그 결과 $SiH_4$ : $O_2$ = 30 : 60 [sccm], 70 [mm]의 source와 기판 거리, Bias를 인가하지 않은 조건에서 80 [$^{\circ}C$] 이하의 공정온도를 보였으며 투과율 90% 이상, 높은 증착률 및 굴절률 1.4~1.5인 안정된 $SiO_2$ 산화박막을 제조할 수 있었다.