• Journal of Mechanical Science and Technology
• /
• 제15권4호
• /
• pp.441-447
• /
• 2001

Ultrasonic wave generation and propagation were modeled to simulate an ultrasonic test. A ray model was used for the modeling. Actual sound pressure distribution of the incident wave from an angle probe was analyzed using an ultrasonic visualization method to incorporate the actual sound pressure distribution in the model. In this method, the sound pressure was expressed by the density of rays and the reflection coefficient of ultrasonic beams. Reflection and mode conversion of rays were computed by the Snells law. Simulation programs for the problem of ultrasonic testing of a butt joint are built using this ray modeling. Simulation results for ultrasonic wave scattering from a defect and A-scan display in ultrasonic testing agreed with the actual experiment results.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.505-509
• /
• 2008

This paper studied the efficient noise prediction method for new apartment house near the road traffic noise. Three noise prediction software were compared by each prediction noise level using the simple model which is included the road, soundproofing wall and building. Two foreign national calculation models(RLS-90 and NMPB) were verified by comparison of measured sound level. Frequency of sound level was predicted by NMPB and compared by measured data. The sphere of noise source and facade reflection were proposed to accurate predict the road traffic noise in new apartment house.

• Environmental Engineering Research
• /
• 제20권4호
• /
• pp.383-391
• /
• 2015

Transparent type noise barrier is a desirable facility since it provides a secure view to drivers and passengers. However, reflection from this type of barrier could annoy dwellers on the sides of the road. To reduce reflection noise by transparent type barrier, modification can be made to the shapes on the front side and hence get effects by distortion of sound transmission. To achieve this, we have conducted simulation by which the effects of patterned screens of noise barrier on high-ways were investigated. The reduction effects of reflected sounds were evaluated for swelling, swelling with curved, rectangular and V-shaped screen type barriers, compared to the planar panel. The emitting noise was generated by 6-lane road and the patterned noise barriers had shown the reduction effects, especially in swelling and swelling with curved type for middle height dwellers, and the V-shaped screen type for higher elevation dweller. The swelling-type showed a decrease of 0.7~1.2 dB, performing the best diminution effect among the tested noise barriers.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1997년도 영남지회 학술발표회 논문집 Acoustic Society of Korean Youngnam Chapter Symposium Proceedings
• /
• pp.68-74
• /
• 1997

Ship radiated noise is an infortant parameter which dtermines Anti Submarine Warfare(ASW) countermeansure or passive Sonar detection and classification performance. Its measurement should be performed under controlled ocean acoustic environment. In data reduction of the measured data from hydrophone array, theeffect fo ambient noise, surface reflection and bottom reflection etc. should be compensated to obtain the source level of the ship radiated noise. This study describes the measurement hydrophone array design criteria based on the analysis of transimission anomaly due to the surface reflection.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2021년도 제63차 동계학술대회논문집 29권1호
• /
• pp.269-271
• /
• 2021

본 논문에서는 실제 현실에서 표현되는 소리의 특징인 파동(Sound wave)과 흐름(Sound flow) 그리고 회절(Diffraction of sound)을 가상환경에서 실시간으로 표현할 수 있는 방법을 제안한다. 우리의 접근 방식은 소리가 재생되는 위치로부터 장애물 여부를 판단하고, 장애물이 존재할 시, 장애물로 인해 반사와 회절된 새로운 소리 위치를 계산한다. 이 과정에서 레이트레이싱 기반으로 장애물과의 충돌 여부를 판단하고, 충돌에 의해 굴절된 벡터를 이용하여 장애물 너머에서 들리는 소리의 크기를 계산하며, 충돌된 레이의 개수에 따라 소리의 크기를 감쇠시킨다. 본 논문에서 제안하는 방법을 이용한 소리의 회절은 물리 기반 접근법에서 나타나는 회절 형태를 실시간으로 표현했으며, 장애물에 따라서 회절 패턴이 변경되고, 이에 따라 소리의 크기가 자연스럽게 조절되는 결과를 보여준다. 이 같은 실험은 실제 현실에서 나타나는 소리의 퍼짐과 같은 특징을 거의 유사하게 복원해냈다.

• 대한조선학회논문집
• /
• 제59권6호
• /
• pp.362-371
• /
• 2022

As considerable interests in noise emission from the ships have been increased, International Maritime Organization (IMO) standardized the Underwater Radiated Noise (URN) measurement process of commercial ships in deep seas by enacting the related ISO standard ISO 17208-1 and classification societies responded with the enactment or revision of corresponding notations. According to this trend, a new hybrid underwater sound propagation model based on underwater sound propagation theories was developed and its accuracy on analysis was verified through the result comparison with the results of other generally used models. Using the verified model, each URN propagation characteristics adjusted by the correction methods proposed in the ISO standard and class notations were analyzed and compared in two assumed URN measurement cases. The results showed that the effects of transmission loss corrections in the circumstances with less bottom reflections generally similar but they had rather large differences in the model analysis results with bottom-reflection-dominant conditions. It was concluded that the deep consideration of effective bottom-reflection-correction method should be made in future revisions of ISO standard and class notations.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.1235-1238
• /
• 1998

In television stereo system, to produce the sound image for spatial impression is too difficult because of the narrow distence between two speakers. A method of widening the sound image using precedence effect was introduced but it didn't work effectively in low frequency band. In this paper, we propose a new method to produce an expanded sound image in full band of audio requency in band sound is expanded by phase shifting method and a higher frequency band sound is expanded by reflection. In simulation and experiment, the proposed system guarantees useful effect of sound image expansion in television stereo system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.699-704
• /
• 2002

A method using beamforming algorithm has been developed to measure oblique incidence reflection coefficients of sound absorption materials. MUSIC(Multiple Signal Classification) method detects the angles of incidence and reflection. By separating the incident and reflected waves using beamforming method, the reflection coefficient is calculated. Spatial smoothing technique is also used to reduce the coherence between the incident and reflected waves. The test materials were modeled as a locally reacting surface. Numerical and experiment results are performed to verify the acuracy of proposed method.

• 한국소음진동공학회논문집
• /
• 제13권6호
• /
• pp.438-444
• /
• 2003

A method using beamforming algorithm has been developed to measure oblique incidence reflection coefficients of sound absorption materials. MUSIC(multiple signal classification) method detects the angles of incidence and reflection. By separating the incident and reflected waves using beamforming method, the reflection coefficient is calculated. Spatial smoothing technique Is also used to reduce the coherence between the incident and reflected waves. Numerical and experiment results are performed to verify the accuracy of proposed method.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.253-256
• /
• 2000

This paper describes a DSP implementation of a real-time 3D sound localization algorithm with the use of a low power embedded DSP. A distinctive feature of this implementation is that the audible frequency band is divided into three, in accordance with the sound reflection and diffraction phenomena through different media from a certain sound source to human ears, and then in each subband a specific implementation procedure of the 3D sound localization is devised so as to operate real-time at a low frequency of 50MHz on a 16bit fixed-point DSP. Thus out DSP implementation can provide a listener with 3D sound effects through a headphone at low cost and low power consumption.