• Journal of Digital Convergence
• /
• v.16 no.1
• /
• pp.147-152
• /
• 2018

Recently, as the demand for transmission of ultra-high quality media data such as UHD, AR, and VR increases, various technologies for this have been actively developed and IEEE 802.11ad standard have been commercialized. In this paper, a test bed is constructed to analyze the indoor wireless environment using the IEEE 802.11ad standard based on mmWave, and the experimental results of various indoor wireless environments are introduced and analyzed. We compared the data from the module by data transmission, such as signal to noise ratio(SNR) and throughput. And we measured the beam pattern and width of the module and compared the effects on the indoor environment of the corridor and the office. This shows that the signal reflection of the wall shows higher SNR values and is more suitable to use for indoor than outdoor. It is confirmed that the loss when not in line of sight(LoS) is not enough to compensate the wall reflected signal. As a result, it is judged to be suitable for the indoor use of the mmWave LAN and can be usefully used for further experiments.

• Korean Journal of Materials Research
• /
• v.21 no.10
• /
• pp.573-579
• /
• 2011

Highly textured Ag, Al and Al:Si back reflectors for flexible n-i-p silicon thin-film solar cells were prepared on 100-${\mu}m$-thick stainless steel substrates by DC magnetron sputtering and the influence of their surface textures on the light-scattering properties were investigated. The surface texture of the metal back reflectors was influenced by the increased grain size and by the bimodal distribution that arose due to the abnormal grain growth at elevated deposition temperatures. This can be explained by the structure zone model (SZM). With an increase in the deposition temperatures from room temperature to $500^{\circ}C$, the surface roughness of the Al:Si films increased from 11 nm to 95 nm, whereas that of the pure Ag films increased from 6 nm to 47 nm at the same deposition temperature. Although Al:Si back reflectors with larger surface feature dimensions than pure Ag can be fabricated at lower deposition temperatures due to the lower melting point and the Si impurity drag effect, they show poor total and diffuse reflectance, resulting from the low reflectivity and reflection loss on the textured surface. For a further improvement of the light-trapping efficiency in solar cells, a new type of back reflector consisting of Ag/Al:Si bilayer is suggested. The surface morphology and reflectance of this reflector are closely dependent on the Al:Si bottom layer and the Ag top layer. The relationship between the surface topography and the light-scattering properties of the bilayer back reflectors is also reported in this paper.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.2
• /
• pp.253-259
• /
• 2016

This paper introduces a new variable power divider circuit with an arbitrary power division ratio ranging from $1:{\infty}$ to ${\infty}:1$. The proposed power divider circuit consists of one branch-line coupler to be a good input matching characteristic, two variable phase shifters with 90-degree phase variation to be connected two output paths of the branch-line coupler, and one ring-hybrid coupler to combine output signals of two variable phase shifter. The power division ratio between the two output ports of the proposed power divider can be easily controlled by the phase variation of the two phase shifter. The proposed power divider circuit fabricates on laminated RF-35 (h = 20 mil, er=3.5; Taconic) with a center frequency of 2 GHz. The power division ratio of the fabricated prototype varies from about 1:1000 to 5000000:1, with an input reflection characteristic(S11) of below -20 dB, an insertion loss of about -1.0 dB, and an isolation characteristic of below -17 dB between two output ports in the range 1.9-2.1 GHz.

• Journal of the Korean Magnetics Society
• /
• v.18 no.3
• /
• pp.120-125
• /
• 2008

In this study, NiCoZn ferrites with the variation of sintering temperature and chemical composition were prepared by the coprecipitation. Microstructures Crystal structure of NiCoZn ferrites were analyzed by XRD and their electric magnetic characteristics were analyzed by LCR meter and their morphology observed by SEM. We identified that these powders have a typical NiCoZn spinel structure and nanoparticles average size of 40 nm. The impurity, the initial permeability and the Q factor value are the lowest of sintered NiCoZn ferrite at $1250^{\circ}C$. Also, we measured S-parameter for $(Ni_{0.4}Co_{0.1}Zn_{0.5})Fe_2O_4$ which showed a maximum reflection loss of -3.1 dB at 6 GHz for the 2 mm thick sample. From this result, we found that the NiCoZn ferrite can be used in ferrite microwave-absorbing application at a higher frequency region (> 6 GHz).

• Journal of Korean Academy of Nursing Administration
• /
• v.8 no.3
• /
• pp.431-439
• /
• 2002

Purpose : Nursing profession has been rapidly changed due to the development of bioscience and the change of medical service environment. Nursing profession that has been focused on only care giver's role like mother's in tradition, is required careful reflection new nursing role to cope properly to the change of medical service environment. In nursing profession, the concept of the role was used without an accurate definition, as a results, the concept of the role was mixed with the concept of the "activity", "job" and "function". Therefore, concept analysis of the role in nursing profession is needed to remove conceptual ambiguous and make confirm the true meaning of the role. Concept analysis is a strategy that examine the characteristics of a concept. It is a formal linguistic exercise to determine those defining attributes. The basic purpose of concept analysis is to clarify ambiguous concept in theory, and propose operational definition which reflects the theoretical base of the concept. Method : In this study, the concept of the role in nursing profession which was analyzed based on the steps of concept analysis by Walker & Avant(1988). Results : The attributes of the concept of the role in nursing profession are : 1. Basic factors to construct social structure. 2. Expected attitudes, values, behavior patterns according to the social status and position in social structure. 3. Perceptive attitudes, values, behavior patterns in order to social interaction. 4. Acquiring through continuous communication and learning. 5. Not fixative but changeable. The antecedents of the role in nursing profession are : 1. The social status and position which is possessed by a person. 2. Expected attitudes, values, behavior patterns according to the social status and position in social structure. 3. Acquiring through continuous interaction, communication, and learning process. And the consequences of the role in nursing profession are : 1. The role maintenance and the role expansion as a positive consequences. 2. The role conflict and the role loss as a negative consequences. Conclusion : Through this concept analysis, the concept of the role in nursing profession is defined as As basic factors to construct social structure, person's attitudes, values, behavior patterns which are expected from other social members according to person's social status and position, and perceived and acquired through continuous interaction, communication, and leaning process.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.3
• /
• pp.236-244
• /
• 2010

In this paper, a planar structure negative group delay circuit(NGDC) is proposed to overcome the limited availability of the component values required for the prototype lumped element(LE) NGDC design. From the prototype LE circuit analysis, general design equations and the conditions to obtain the NGD are derived and illustrated. Then the LE circuit is converted into the planar structure by applying the transmission line resonator(TLR) theory. As a design example, the LE NGDC and the proposed planar structure NGDC are designed and compared. To estimate the commercial applicability, 2-stage reflection type planar NGDC with -5.6 ns of total group delay, -0.2 dB of insertion loss, and 30 MHz of bandwidth together with 0.1 dB and 0.5 ns of the magnitude and group delay flatness, respectively, for Wideband Code Division Multiple Access(WCDMA) downlink band is fabricated and demonstrated. Also, to show the applicability of the proposed NGDC, we have configured a simple signal cancellation loop and obtained good loop suppression performance.

• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.331-337
• /
• 2003

This paper represents 50 ㎓ narrow band pass filters for fiber optical communication fabricated by dual ion beam sputtering method. We have analyzed the characteristics of the TA$_2$ $O_{5}$ and $SiO_2$ single layers in order to optimize the process conditions for the 50 ㎓ narrow band pass filters, and controlled the film thickness uniformity to less than 0.1 nm deviation by dual peak spike filter pre-deposition. We designed and fabricated 50 ㎓ narrow band pass filters that consist of 216 layers including 4 cavities based on quarter wave optical thickness. Class substrates with high thermal expansion coefficients were used to reduce the film stress. Anti-reflection coating at the rear side of the substrate was also needed to reduce the optical thickness errors of the Optical Monitoring System caused by multiple beam interference between the front side and the rear side of substrate. The optical characteristics of this 50 ㎓ narrow band pass filters are insertion loss of 0.40 ㏈, pass band ripple of 0.20 ㏈, and pass bandwidth at -0.5 ㏈ of 0.20 nm. and isolation bandwidth at -25 ㏈ of 0.6 nm, which satisfy specifications of dense WDM system in fiber optical communications.tions.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.3
• /
• pp.181-189
• /
• 2019

In this study, a triple-band antenna that can be used in WLAN(Wireless Local Area Network) at 2.4 GHz, 5.8 GHz, and 5G at 3.5 GHz is fabricated. The proposed antenna uses a parasitic element to show the triple band, and the reflector is used at a distance of ${\lambda}/4$ from the antenna to reduce the Specific Absorption Rate(SAR). Its dimensions are $100{\times}75{\times}1.6mm^3$ and each parameter value is optimized for better performance and a lower SAR value. As a result, we obtained a bandwidth of 540 MHz(2.02~2.56 GHz), 390 MHz(3.39~3.78 GHz), and 1,210 MHz(5.56~6.77 GHz) based on the reflection loss factor of -10 dB. In addition, the SAR values of the antenna with reflector are observed to reduce below the SAR value of international standard.

• The Journal of the Korea Contents Association
• /
• v.19 no.5
• /
• pp.163-177
• /
• 2019

This study is concerned with "fiction" as a new form of writing over the limits of the post-modernist theater/arts. Fiction is not something illusory that demands the audience's empathy but something that unveils form's disinterest in content. Thus, in this paper, I examine a fiction as the opposition of any representational norm and words' old mimesis. Rebutting the crisis of post-modern art and the end of images, philosopher Jacque $Ranci{\grave{e}}re$ mentions the possibility of appropriating similarity in an imitative way by twisting Platonic mimesis. The image of this similarity wanders alongside the loss of signification, unmasking the form's indifference to content. These wandering words represent their own truth "in a way fossils or grooved stones encapsulate histories" as hieroglyphics. This "fiction" as an alternative of post-modernist plays is not any confrontation of reality but the "movement of thinking" that allows the human spirit to play in a way of shaping "some substantiality." In this sense, I examines works by two French writers, $Jo{\ddot{e}}l$ Pommerat (1963~) and Jean-Claude Grumberg (1939~ ) who have carried out their writing practices of appropriating similarity that dissolves any simple "immediate reflection" for non-intermediate relations between the producing and the produced. Their writing is a cross of literary creation and "le politique" as a new aesthetic practice of writing and reveals the movement of thinking, departing from the preexisting concept of fiction.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.7
• /
• pp.193-203
• /
• 2019

Family films with insight of the society are now recognized as significant texts to communicate with audience from the beginning of the history of film and to reflect various viewpoints on changes of the times and socio-cultural context. In such aspect, the films of Hirokazu Kore-eda are very significant in that they suggest very sharp view on modern society through family narrative. His family narratives not only presented a profound reflection on the modern society and human relations through themes on death, loss, severance, and alienation, but also formed a public sympathy based on success in the box-office numbers despite his heavy subjects. His such achievement is closely related to the format of spatial representation to record 'time' and 'daily life' as well as the family film as a narrative form to draw the meaning of a family. Therefore, this study analyzes the family narrative and the format of spatial representation in the films of Hirokazu Kore-eda, and could find the film form where life and space closely communicate each other to reach the topic. This study, concentrating on the spatial representation and the roles and meanings of formal factors in family narrative, can find its own value in its expansion out of the previous studies which adopted macro perspectives on the trend of the times.