• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.9
• /
• pp.35-43
• /
• 2002

In this paper, microstrip ring with a narrow gap is characterized and used as a tunable microwave bandgap (MBG) structure. The center frequency of MBG is mainly determined by the mean circumference of the ring and coincides with odd mode resonance frequency of the ring resonator. The stop band formation by the proposed microstip MBG ring is due to the reflection of electromagnetic waves at the narrow gap introduced in the ring, and the reactive component mounted on the gap makes the stop band vary according to its value. The mounting of capacitor (inductor) is observed to decrease (increase) the center frequency of the stop band. The varactor-mounted microstrip MBG ring is expected to be useful in microwave switches and microwave amplifier circuits.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.9
• /
• pp.1633-1640
• /
• 2016

In this paper, we propose a open-ended rectangular microstirp patch antenna with fork-shaped feeding structure. This antenna extends the effective bandwidth by transforming single or multi resonant frequency and is designed planar monopole structure with microstrip line to satisfy the WLAN bands (2.4 - 2.484, 5.15 - 5.35, 5.25-5.825 GHz). The substrate is printed in 0.8 mm thickness on an FR-4 board. A commercial 3D simulation tool was used to analyze surface current and electromagnetic field distribution in order to analyze the operation mode and reconfiguration principle of antenna. According to the lengths of individual patches, simulated reflection loss was compared to obtain optimized values. When it was designed with the optimized values, it satisfied WLAN bands (2.380 - 2.710, 4.900 - 5.950 GHz), if the switch is off, and 2.4 WLAN band (2.380 - 2.710 GHz). From the fabricated and measured results, measured results of return loss, gain and radiation patterns characteristics displayed for operating bands.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.11
• /
• pp.1281-1286
• /
• 2008

The PSK carrier signal recovery circuit using a six-port phase correlator was analyzed and the circuit structure is proposed in this paper. The proposed carrier signal recovery circuit that is made of reflection element and six-port phase correlator, which is comprised of a power divider and three hybrid branch line couplers, give a simple structure and can be fabricated without no difficulty. The circuit recovers the carrier signal of BPSK and QPSK modulation signal. The proposed scheme can be utilized as a basis structure for high-mode PSK carrier signal recovery. By simulation results, the recovered signal by the proposed circuit shows a good carrier signal characteristic with CW signal of a constant phase($23.4^{\circ}$) and ${\pm}0.8^{\circ}$ phase error due to glitch conditions.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.1
• /
• pp.59-69
• /
• 1997

The growth and microstructural characterization of epitaxial yttrium silicide ($YSi_2$) on the (100)Si substrate are investigated. The $YSi_2$ film grow epitaxilly through the solid phase reaction during vacuum annealing above $400^{\circ}C$. The epitaxial relationships between the hexagonal $YSi_2$ film and the (100)Si substrate are [0001]$YSi_2$//[011]Si and [0001]$YSi_2$//[011]Si in the (1100)$YSi_2$//(100)Si plane relation. The YSi$_2$ film consists of the two types of domains which have two different azimuthal orientations making an angle of $90^{\circ}$ to each other. The two types of domains in the $YSi_2$film are equivalent in volume fraction and crystalline quality, which has been proved from the equivalent integrated intensities of (2201) asymmetric reflection of X-ray diffraction. The formation of a double -domain structure is discussed on the basis of geometrical matching at interface between the (1100)$YSi_2$ film and the (100)Si substrate, and growth model is proposed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6D
• /
• pp.539-547
• /
• 2012

Increasing the mode transfer volume between public transportation modes has known to be necessary for efficiency improvement of public transportation system operation and it is also found to be important to have relevant transfer point selection with reflection of current travel pattern. This study is in regards to providing a selection guideline for the location of transfer point between public transport modes. This case study has been carried out for Daegu Metropolitan City especially for public transportation users behaviour by analysis of daily usage of transportation card to identify the transfer travel pattern. A cluster analysis was applied to categorize the pattern of transfer stop which induces many users and a discriminant analysis also utilized for grouping the stops by number of transfer trip. This research produces the estimation result of transfer volume for urban railway system no.3 in Daegu City which is currently under construction. In addition, the locations of transfer center has also been proposed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.4
• /
• pp.736-742
• /
• 2003

This paper presents the propagation path loss in a tunnel which is a kinds of underground environments. To predict propagation path loss more accurately, we choose a straight tunnel with rectangular cross-section. The simulated receiver powers that are using a hybrid waveguide model and a Ray-Tracing method, are compared with the measured ones as a function of distance between TX and RX antennas in tunnel. The attenuation value of regression analysis for measured power in the tunnel is 0.0238dB/m which is similar to the one of the EH1.2 mode, 0.0246dB/m in hybrid waveguide model. By comparing simulation with measurement in tunnels, it has been shown that the measured values are approximate to the simulated results of ray-tracing model. In the analysis of wide-band channel characteristics of the tunnel, the more the distance between TX and RX antennas in tunnel increases, RMS delay spread increases and coherence bandwidth decreases.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.398-398
• /
• 2013

The electronic properties and the local structure of tantalum oxide thin film with variation of oxygen flow rate ranging from 9.5 to 16 sccm (standard cubic centimeters per minute) have been investigated by X-ray photoelectron spectroscopy (XPS), Reflection Electron Energy Loss Spectroscopy (REELS), and X-ray absorption spectroscopy (XAS). The XPS results show that the Ta4f spectrum for all films consist of the strong spin-orbit doublet $Ta4f_{7/2}$ and $Ta4f_{5/2}$ with splitting of 1.9 eV. The oxygen flow rate of the film results in the appearance of new features in the Ta4f at binding energies of 23.2 eV, 24.4 eV, 25.8, and 27.3 eV, these peaks attribute to $Ta^{1+}$, $Ta^{2+}$, $Ta^{4+}$/$Ta^{2+}$, and $Ta^{5+}$, respectively. Thus, the presence of non-stoichiometric state from tantalum oxide ($TaO_x$) thin films could be generated by the oxygen vacancies. The REELS spectra suggest the decrease of band gap for tantalum oxide thin films with increasing the oxygen flow rate. The absorption coefficient ${\mu}$ and its fine structure were extracted from the fluorescence mode of extended X-ray absorption fine structure (EXAFS) spectra. In addition, bond distances (r), coordination numbers (N) and Debye-Waller factors (${\sigma}^2$) each film were determined by a detailed of EXAFS data analysis. EXAFS spectrapresent both the increase of coordination number of the first Ta-O shell and a considerable reduction of the Ta-O bond distance with the increase of oxygen flow rate.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.51
• /
• pp.3-54
• /
• 2011

The important and main purpose of revision of Incoterms rules are to adapt it to contemporary commercial practice in world trade, and to contribute to great service to foreign trade. Incoterms$^{(R)}$ 2010 revision basically focuses on trade terms to be used for any mode or modes of transport at compared Incoterms 2000 gouping in four basically different categories, and presents trade terms to be used for traditionally seaborn trade. Therefore the former is for trading in manufactured goods involved in containerization, the latter is for trading in community. This study focuses on a motive of revisions and main features of the Incoterms$^{(R)}$ 2010 rules, an outline, the problems and alternative of them. In conclusion, I would like present as follows; (1) Although they only concerned the models of delivery and critical point, they only say a few of the many factors of a sale contract, that is to say for the devision of fuctions, costs and risks between the contracting parties as supplement law, but the guestion of the legal position of Incoterms rules is various in different countries and scholars. in spite of that, it must focus on the practical application and the wide acceptance of Incoterms rules in world trade. (2) Although they present more simple and clear, unfricative, than Incoterms 2000 rules, in order to help users, the need to unify consistently and fully explanate in contents and expression. (3) Introduction and guidance note of Incoterms$^{(R)}$ 2010 rules basically focuses on the understanding of a motive of revisions as compared Incoterms 2000 rules. But it is well advised to do this on the assumption of understanding the various basic meaning of terms. (4) finally, trade concerned regulations take account of the reflection for the application to domestic and international trade according to formally reconization of availability for both trade.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.3
• /
• pp.296-304
• /
• 2013

PURPOSE. The aim of this study was to evaluate the effect of polishing and glazing on the color and spectral distribution of monolithic zirconia. MATERIALS AND METHODS. Forty-five monolithic zirconia specimens ($16.3mm{\times}16.4mm{\times}2.0mm$) were fabricated and divided into 5 groups according to the number of A2-coloring liquid applications (Group I to V). Each group was divided into 3 subgroups according to the method of surface treatments (n=3): N: no treatment; P: polishing; G: glazing. Color and spectral distribution of five different areas of each specimen were measured according to CIELAB color space in the reflectance mode relative to the standard illuminant D65 on a reflection spectrophotometer. Data were analyzed using one-way ANOVA followed by Tukey's HSD test, Pearson correlation and regression analysis (${\alpha}$=.05). RESULTS. There was a significant difference in CIE $L^*$ between Subgroup N and P, and in CIE $b^*$ between Subgroup P and G in each group. Spectral reflectance generally decreased in Subgroup P and G in comparison with Subgroup N. Color differences between Subgroup P and G were within the perceptibility threshold (${\Delta}E{^*}_{ab}$ < 3.7) in most groups. Highly significant correlation was found between CIE $b^*$ and each subgroups as the number of coloring liquid applications increased ($R^2$ >0.88, P<.001). CONCLUSION. A perceptible color difference can be detected after polishing of monolithic zirconia. Polishing decreases the lightness, and glazing also decreases the lightness, but increases the yellowness of monolithic zirconia.

• International Journal of Ocean System Engineering
• /
• v.1 no.2
• /
• pp.60-67
• /
• 2011

This paper presents an in-situ correction method to compensate for the position error of an autonomous underwater vehicle (AUV) near the sea floor. AUVs generally have an inertial navigation system assisted with auxiliary navigational sensors. Since the inertial navigation system shows drift in position without the bottom reflection of a Doppler velocity log, external acoustic positioning systems, such as an ultra short baseline (USBL), are needed to set the position without surfacing the AUV. The main concept of the correction method is as follows: when the AUV arrives near the sea floor, the vehicle moves around horizontally in a circular mode, while the USBL transceiver installed on a surface vessel measures the AUV's position. After acquiring one data set, a least-square curve fitting method is adopted to find the center of the AUV's circular motion, which is transferred to the AUV via an acoustic telemetry modem (ATM). The proposed method is robust for the outlier of USBL, and it is independent of the time delay for the data transfer of the USBL position with the ATM. The proposed method also reduces the intrinsic position error of the USBL, and is applicable to the in-situ calibration as well as the initialization of the AUVs' position. Monte Carlo simulation was conducted to verify the effectiveness of the method.