• 대한의용생체공학회:의공학회지
• /
• 제13권4호
• /
• pp.299-306
• /
• 1992

For quantitative measurement of reflected light from a clinical diagnostic scrip, a prototype of reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate re(leclance parameters. The strop was illuminated at $45^{\circ}C$ through optical fiber and the intensity of reflected light was determined at rectangulat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/dl about glucose, a saturation state of absorbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm.

• 전자공학회논문지S
• /
• 제34S권6호
• /
• pp.21-29
• /
• 1997

In this paper, we propose a new approach for recovering 3-D shape and extracting the reflectance properties of surface from intensity images. Photometric stereo method(PSM) is genrally based on the direct illumination. In this paper, the reflectance function is derived by interoduceing the indirect diffuse illumination in PSM and then applied to hybrid reflectance model which consists of two components; the lambertian and the specular reflectance. Under the hybrid reflectance model and the indirect diffuse illumination circumstance, the reflectance properties of sample surface can be extracting by normal sampler and then 3-D shape of an object can be recovered based on extracting reflectance properties. This method is rapid because of using the reference table and simplifies the restriction condition about the reflectance function existing in prior studies. Th erecovery efficiency in our method is better than that in prior studies. Also, this method is applied to various types of surfaces by defining general reflectance function.

• 폴리머
• /
• 제35권3호
• /
• pp.272-276
• /
• 2011

선택 반사를 보여주는 콜레스테릭 액정의(cholesteric liquid crystal; CLC) planar 배열이 유도되는 메카니즘을 CLC 셀의 선택 반사율과 FTIR $C{\equiv}N$ 피크 세기를 측정하여 조사하였다. 배향막을 사용한 경우보다는 planar 배열 유도가 완전하지는 않았지만 shear force를 이용하거나 또는 고분자 기판을 연신하여 배향막을 사용하지 않은 상태에서 planar 배열을 유도하였다. CLC의 planar 배열이 유도되는 메카니즘은 기판 표면에 접촉하는 액정분자들이 한 방향으로 늘어서면, 그 액정분자 위에 CLC의 나선 구조들이 기판에 수직으로 형성되며 planar 배열이 유도되는 것이다.

• 로봇학회논문지
• /
• 제16권2호
• /
• pp.94-102
• /
• 2021

This study addresses a method for 3D reconstruction using acoustic data with heterogeneous sonar devices: Forward-Looking Multibeam Sonar (FLMS) and Profiling Sonar (PS). The challenges in sonar image processing are perceptual ambiguity, the loss of elevation information, and low signal to noise ratio, which are caused by the ranging and intensity-based image generation mechanism of sonars. The conventional approaches utilize additional constraints such as Lambertian reflection and redundant data at various positions, but they are vulnerable to environmental conditions. Our approach is to use two sonars that have a complementary data type. Typically, the sonars provide reliable information in the horizontal but, the loss of elevation information degrades the quality of data in the vertical. To overcome the characteristic of sonar devices, we adopt the crossed installation in such a way that the PS is laid down on its side and mounted on the top of FLMS. From the installation, FLMS scans horizontal information and PS obtains a vertical profile of the front area of AUV. For the fusion of the two sonar data, we propose the probabilistic approach. A likelihood map using geometric constraints between two sonar devices is built and a monte-carlo experiment using a derived model is conducted to extract 3D points. To verify the proposed method, we conducted a simulation and field test. As a result, a consistent seabed map was obtained. This method can be utilized for 3D seabed mapping with an AUV.

• 방송공학회논문지
• /
• 제22권2호
• /
• pp.207-213
• /
• 2017

다수의 조명을 이용한 멀티스펙트럴 이미징을 정확히 수행하기 위해서는 영상 내 조명의 세기가 균일해야 한다. 멀티스펙트럴 이미징이 아니더라도 정확한 색 정보가 필요한 영상 획득에서는 조명이 정확해야 하고, 정확한 조명 특성을 위해 평면 광원을 사용하거나 조명 캘리브레이션을 수행한다. 본 논문에서는 조명의 세기가 균일하지 않은 영상을 조명의 세기가 균일하도록 색상을 보정하는 방법을 제안한다. 우선 비균일 조명에서 얻은 두 영상으로 멀티스펙트럴 이미징을 수행하여 반사 스펙트럼을 획득하고 획득한 반사 스펙트럼을 형광등이나 태양광과 같은 평면광에서 획득한 영상의 조명 특성으로 재조명한다. 재조명으로 얻은 영상과 평면광 영상의 조도 분포의 차이를 이용해서 비균일 조명 영상을 균일한 영상에서 획득한 영상처럼 색상 보정을 수행한다. 실험 결과로 조명의 비균일성이 균일하게 보정되었는지 확인하고, 이 결과를 통해 영상의 색 정보를 취득하는 데 조명의 제약사항을 줄일 수 있을 것으로 기대된다.

• Composites Research
• /
• 제13권1호
• /
• pp.89-97
• /
• 2000

광섬유센서를 이용한 복합적층판의 피로손상 감지 및 진동측정, 그리고 스틸 보에 대한 충격위치 검출에 관한 연구가 수행되었다. 피로과정중의 신호는 복합재료 내에 삽입된 광섬유와 표면에 부착한 광강도형 광섬유센서, 그리고 스트레인게이지로부터 동시에 측정되었다. 진동감지 실험은 복합재료 보의 표면에 광섬유센서를 부착하여 자유진동 및 강제진동 신호를 취득하였다. 충격위치 검출에 관한 실험에서 충격위치는 충격에 의해 발생된 구조물의 진동이 두 센서에 도달하는 시간의 차를 이용하여 구할 수 있다. 광강도형 광섬유센서를 이용하여 반복 피로 신호를 잘 취득할 수 있었으며 스트레인게이지에 비하여 피로저항성이 우수함이 확인되었다. 광섬유센서는 갭센서와 동일하게 진동신호를 감지하였고 구조물에 가해진 충격위치를 비교적 정확히 검출할 수 있었다.

• 한국축산식품학회지
• /
• 제24권3호
• /
• pp.310-318
• /
• 2004

Eating quality is a reflection of consumer satisfaction, while beef quality grade describes carcass characteristics of chiller assessment which are largely influenced by production systems including breeding and feeding schemes. On the other hand, it should be emphasized that high palatability of beef is a function of production and processing components including breed, nutrition, animal handling, post-slaughter intervention and cookery. Numerous efforts have been made by Korean beef industry and research institutes to deliver high quality beef with which domestic beef consumers are satisfied. However, majority of studies have tended to focus on improvement of intramuscular fat content with little attention on its effect on consumer-based eating quality. Furthermore, there is very limited accessible information(if any) on relative importance of eating characteristics (eg, tenderness, juiciness and flavor intensity) to consumer satisfactory rate and palatability grade. On this regard, our recent results indicated, for example, that when m. longissimus was prepared by a thin-slice style BBQ, relative weightings of tenderness, juiciness and flavor intensity for consumer satisfactory rate were 0.4, 0.35 and 0.25, respectively. When eating quality was graded into 4 groups by a sum of tenderness, juiciness and flavor intensity after multiplying these coefficients, consumers responded that the palatability score for high quality beef should be higher than 79 points. Based on our recent experiments, the current report is intended to highlight relative importance of eating quality characteristics on consumer satisfactory rate, and threshold of eating quality grade. In addition, post-slaughter intervention techniques such as electrical stimulation and tenderstretch are given as examples of critical control points of palatability assurance program of Hanwoo beef.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 추계종합학술대회
• /
• pp.268-270
• /
• 2007

NIR을 이용하여 시간 변화에 따른, 소 등심육의 부위별(살코기와 지방)특성을 조사 하였다. 소 등심육의 특성은 분광분석법을 사용하여 측정하였다. 육질은 총 세 가지 종류의 Sample로 구분 하여 각각의 Sample 마다 3Point 씩 Point를 정하여 측정 하였고, 냉동상태와, 20분경과 후 그리고 해동 40분경과 후를 측정 하였다. 측정결과 Moglobin의 분포에 따라 광도의 변화가 발생하였고, 이를 통해 소 등심육의 살코기와 지방 분포에 따라 고기 육질의 품질 판별 및 특성의 파악이 가능할 것으로 예상된다.

• 정보저장시스템학회논문집
• /
• 제9권1호
• /
• pp.10-16
• /
• 2013

Through the rapid development of LED TV, a large-area edge-lit backlight unit is widely researched in the display industry for enhancing the optical efficiency, luminous uniformity and slim design. In addition, an edge-lit backlight unit includes many optical sheets such as reflection sheet, prism sheet and diffuser sheet. However the function can be replaced by the carefully patterned light guide plate (LGP). Micro patterns which located on the top and bottom surface of light guide plate was designed by ray-tracing optical simulation. The designed patterns improved the light characteristics of LGP, including optical extraction efficiency and intensity distribution uniformity. These results suggest that it is very effective method to design edge-lit LGP with micro-patterns on both sides for large-area display and to reduce the fabrication cost.

• 센서학회지
• /
• 제17권6호
• /
• pp.447-453
• /
• 2008

Respiration rate is one of the important vital signs. Photo-plethysmography (PPG) measurement especially on a finger has been widely used in pulse oximetry and also used in estimating respiration rate. It is well known that PPG contains respiration-induced intensity variation (RIIV) signal. However, the accuracy of finger PPG method has been controversial. We introduced a new technique of enhancing motion artifact by respiration. This was achieved simply by measuring PPG on the thorax. We examined the accuracy of these two PPG methods by comparing with two existing methods based on thoracic volume and nostril temperature changes. PPG sensing on finger tip, which is the most common site of measurement, produced 6.1 % error. On the other hand, our method of PPG sensing on the thorax achieved 0.4 % error which was a significant improvement. Finger PPG is sensitive to motion artifact and it is difficult to recover fully small respiratory signal buried in waveform dominated by absorption due to blood volume changes. Thorax PPG is poor to represent blood volumes changes since it contains substantial motion artifact due to respiration. Ironically, this inferior quality ensures higher accuracy in terms of respiration measurement. Extreme low-cost and small-sized LED/silicon detector and non-constrained reflection measurement provide a great candidate for respiration estimation in ubiquitous or personal health monitoring.