• 전자공학회논문지T
• /
• 제35T권1호
• /
• pp.99-104
• /
• 1998

본 연구는 통신용 안테나로서 횡 특성과 외부 도체와 거리 영향을 받지 아니하는 슬리트 안테나를 연구 개발하였다. 개발방법은 슬리트 동축선 구조에 대한 누설 전자장 특성을 이용하여 전자통신시스템용 이동통신 주파수대역(800-900㎒) 안테나로 개발 설계하며, 전용소프트웨어를 사용한 컴퓨터 시뮬레이션 하였다. 안테나의 사용 대역 851㎒에서 반사계수 S11이 0.21과 지향성 2.9 및 주파수 대역 1.5㎒을 갖는 우수한 결과를 보인다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.358-360
• /
• 2007

For large scaled solar cells and photosensors CdS thin films of $2{\mu}m$ thickness have deposited on ITO glass substrate by chemical bath deposition methode in $300^{\circ}C$ electric furnace. The surface roughness and resistance of cadmium sulphide(CdS) thin films with different microstructures and morphologies was investigated by using a x-ray diffraction (XRD), a scanning electron microscope (SEM), an atomic force microscope (AFM), and a near-field scanning microwave microscope (NFMM). As the different substrate heat temperatures, the microwave reflection coefficient $S_{11}$ and intensity of the (002) diffraction peak was changed, and the surface morphology also has shown differently.

• 한국전자파학회논문지
• /
• 제23권12호
• /
• pp.1337-1342
• /
• 2012

본 논문에서는 RF 스위치 역할을 하는 핀-다이오드를 이용하여 정합 회로의 형상을 변경하는 새로운 형태의 재구성 안테나를 제안하였다. 개발된 안테나는 HSDPA 대역(2.1~2.2 GHz), WiBro WiFi 대역(2.3~2.5 GHz)에서 Mode 1과 Mode 2의 두 가지 모드로 동작할 수 있도록 하였으며, polyarcylate 기판의 양면을 이용하여 제작 및 측정을 하였다. 측정 결과, Mode 1과 Mode 2의 동작 주파수에서 547 MHz($S_{11}$ <-3 dB, 2.035~2.582 GHz), 600 MHz($S_{11}$ <-3 dB, 2.2~2.8 GHz)의 대역폭을 보였으며, 각각 -4.4 dBi, -4.5 dBi의 x-y 평면 평균 수직 복사 성능을 보였다.

• Journal of electromagnetic engineering and science
• /
• 제16권2호
• /
• pp.134-142
• /
• 2016

This paper proposes a technique for improving the conventional conical horn antenna for the X-band frequency using metamaterial on a wire medium structure. The main idea of this research is the application of the wire medium metamaterial to the conical horn's aperture for the enhancement of the horn's gain; this is done without changing the antenna's dimensions. The results show that the wire medium structure can increase the gain of a conventional conical horn antenna from approximately 17.7 dB to 20.9 dB (an increase of approximately 3.2 dB). A prototype antenna was fabricated, and its fundamental parameters including its reflection coefficient ($S_{11}$), radiation patterns, and directive gain were measured. The simulated and measured results were very good. The wire medium structure of the proposed antenna improved the radiation pattern, enhanced the directivity, increased the gain, and reduced the side lobe level using a simple integrated wire medium structure.

• 대한전자공학회논문지SD
• /
• 제41권12호
• /
• pp.7-12
• /
• 2004

본 논문에서는 0.1 $\mum$ InGaAs/InAlAs/GaAs Metamorphic HEMT (High Electron Mobility Transistor)를 이용하여 DC~45 GHz 대역의 광대역 MIMIC(Millimeter-wave Monolithic Integrated Circuit) 분산 증폭기를 설계 및 제작하였다. MIMIC 증폭기의 제작을 위해 Metamorphic HEMT(MHEMT)를 설계 및 제작하였으며, 제작된 MHEMT는 드레인 전류 밀도 442 mA/mm, 최대 전달컨덕턴스(Gm)는 409 mS/mm를 얻었다. RF 특성으로 fT는 140 GHz fmax는 447 GHz의 양호한 성능을 나타내었다. 광대역 MIMIC 분산 증폭기의 설계를 위해 MHEMT의 소신호 모델과 CPW 라이브러리를 구축하였으며, 이를 이용하여 MIMIC 분산 증폭기를 설계하였다. 설계된 분산 증폭기는 본 연구에서 개발된 MHEMT MIMIC 공정을 이용하여 제작하였으며, MIMIC 분산 증폭기의 측정결과, DC ~ 45 GHz대역에서 6 dB 이상의 S21 이득을 얻었으며, 입력반사 계수는 45 GHz에서 -10 dB, 출력반사계수는 -7 dB의 특성을 나타내었다. 제작된 분산 증폭기의 칩 크기는 2.0 mm$\times$l.2 mm다.

• Journal of electromagnetic engineering and science
• /
• 제18권2호
• /
• pp.117-128
• /
• 2018

In this paper, compact linear dual polarized series-fed $1{\times}2$ linear and $2{\times}2$ planar arrays antennas for airborne SAR applications are proposed. The proposed antenna design consists of a square radiating patch that is placed on top of the substrate, a quarter wave transformer and $50-{\Omega}$ matched transformer. Matching between a radiating patch and the $50-{\Omega}$ microstrip line is accomplished through a direct coupled-feed technique with the help of an impedance inverter (${\lambda}/4$ impedance transformer) placed at both horizontal and vertical planes, in the case of the $2{\times}2$ planar array. The overall size for the prototype-1 and prototype-2 fabricated antennas are $1.9305{\times}0.9652{\times}0.05106{{\lambda}_0}^3$ and $1.9305{\times}1.9305{\times}0.05106{{\lambda}_0}^3$, respectively. The fabricated structure has been tested, and the experimental results are similar to the simulated ones. The CST MWS simulated and vector network analyzer measured reflection coefficient ($S_{11}$) results were compared, and they indicate that the proposed antenna prototype-1 yields the impedance bandwidth >140 MHz (9.56-9.72 GHz) defined by $S_{11}$<-10 dB with 1.43%, and $S_{21}$<-25 dB in the case of prototype-2 (9.58-9.74 GHz, $S_{11}$< -10 dB) >140 MHz for all the individual ports. The surface currents and the E- and H-field distributions were studied for a better understanding of the polarization mechanism. The measured results of the proposed dual polarized antenna were in accordance with the simulated analysis and showed good performance of the S-parameters and radiation patterns (co-pol and cross-pol), gain, efficiency, front-to-back ratio, half-power beam width) at the resonant frequency. With these features and its compact size, the proposed antenna will be suitable for X-band airborne synthetic aperture radar applications.

• 한국통신학회논문지
• /
• 제39C권11호
• /
• pp.1209-1215
• /
• 2014

기하학적 균일 회절 이론(UTD)은 특정 주파수에서 장애물에 의해 전파가 불연속적인 특성을 가질 때, 전자기학적으로 접근하여 회절 계수와 반사 계수 등을 계산하여 전파를 분석하는 기법이다. 본 논문에서는 실내 무선 채널 환경에서 사용자가 단말기 주변에 있을 때, 사용자에 의한 쉐도잉(Shadowing) 효과를 기하학적 UTD을 통하여 분석하였다. 사용자가 통화를 하고 있는 상황(Head Model)과 가슴 앞쪽에 단말기를 위치하여 사용하는 상황(Chest Model)으로 나누고, 각각에 대하여 복사 모델(Radiation Model)과 산란 모델(Scattering Model)에 적용하여 비교 및 분석하였다.

• Membrane and Water Treatment
• /
• 제7권3호
• /
• pp.193-207
• /
• 2016

Boron is one of the most problematic inorganic pollutants and is difficult to remove in water. Strict standards have been imposed for boron content in water because of their high toxicity at high concentrations. Technologies using membrane processes such as reverse osmosis (RO) and nanofiltration (NF) have increasingly been employed in many industrial sectors. In this work, removal of boron from model water solutions was investigated using polyamide reverse osmosis and nanofiltration membranes. RO-AG, RO-SG, NF-90 and NF-HL membranes were used to reduce the boron from model water at different operational conditions. To understand the boron separation properties a characterization of the four membranes was performed by determining the pure water permeability, surface charge and molecular weight cut-off. Thereafter, the effect of feed pressure, concentration, ionic strength, nature of ions in solution and pH on the rejection of boron were studied. The rejection of boron can reach up to 90% for the three membranes AG, SG and NF-90 at pH = 11. The Spiegler-Kedem model was applied to experimental results to determine the reflection coefficient of the membrane ${\sigma}$ and the solute permeability $P_s$.

• 마이크로전자및패키징학회지
• /
• 제12권3호
• /
• pp.267-274
• /
• 2005

This paper presents the fabrication of surface acoustic wave (SAW)-based pressure sensor for long-term stable mechanical compression force measurement. SAW pressure sensor has many attractive features for practical pressure measurement: no battery requirement, wireless pressure detection especially at hazardous environments, and easy other functionality integrations such as temperature, humidity, and RFID. A $41^{\circ}$ YX $LiNbO_3$ piezoelectric substrate was used because of its high SAW propagation velocity and large values of electromechanical coupling factors $K^2$. A silicon substrate with $\~200{\mu}m$ deep cavity was bonded to the diaphragm with epoxy, in which gold was covered all over the inner cavity in order to confine electromagnetic energy inside the sensor, and provide good isolation of the device from its environment. The reflection coefficient $S_{11}$ was measured using network analyzer. High S/N ratio, sharp reflected peaks, and clear separation between the peaks were observed. As a mechanical compression force was applied to the diaphragm from top with extremely sharp object, the diaphragm was bended, resulting in the phase shifts of the reflected peaks. The phase shifts were modulated depending on the amount of applied mechanical compression force. The measured $S_{11}$ results showed a good agreement with simulated results obtained from equivalent admittance circuit modeling.

• 한국통신학회논문지
• /
• 제22권6호
• /
• pp.1251-1258
• /
• 1997

Generally, it is very important to study selective coupling between cavities of the filter structure using multimode cavity resonator. In this paper, we have manufactured 5-pole bandpass filter(BPF) using dual and triple-mode cavity resonator. To do so, we have derived the formulas for coupling coefficient about coupling between TE-modes from TM/TE-mode's tangential and lognitudinal field intensities each other. To implement the Chebyshev response, the intercabity slot combining dual-mode and triple-mode is designed to couple one H-field of TE-mode parallel to slot plate. In this paper, specially it is derived the formulas for T $E_{11p}$-mode from TE-modes, and determined after obtaining location and size of intercabity slot from the equation. In this ppaer, based on this result, we designed and implmented teh bandpass filter operated at the center frequency of 14.5GHz with a Chebyshev response. For the manufactured cavity filter, dual-mode and triple-mode cavity are resonted by two orthogonal T $E_{113}$-modes, and by two orthogonal T $E_{113}$-modes and one T $M_{012}$-mode, respecitively. The 2-stage 5-pole BPF proposed in this paper has the insertion loss of -2.32dB, the reflection loss of -15dB in the passband, and the out-or-rejection of -67dB.