• 제목/요약/키워드: Reflection

검색결과 5,927건 처리시간 0.025초

경사지형에서 파군에 의해 생성된 장파의 Bragg 반사 (Bragg Reflection of Long Waves Generated by Short Wave Groups on a Sloping Beach)

  • 정재상;조용식
    • 한국수자원학회논문집
    • /
    • 제36권3호
    • /
    • pp.413-422
    • /
    • 2003
  • 본 연구에서는 Boussinesq 방정식을 이용하여 유도된 장파를 지배하는 한창의 상미분방정식을 이용하여, 완만히 변하는 일정경사면의 정현파형 지형에서의 Bragg 반사를 해석하였다. 입사파는 위상이 다른 두 단파의 중첩에 의해 생성된 파군을 사용하였다. Bragg 반사 조건에서 해저지형의 경사가 장파의 반사에 미치는 영향에 대하여 검토하였으며, 해저지형의 경사가 클수록 반사는 크게 나타났다. 이는 수심의 감소로 인해 비선형성이 증가하였으며, 이로 인한 파랑의 천수효과로 입사파의 파고가 상승하여, 반사 역시 크게 나타난 것으로 판단된다.

2차원 유한요소법을 이용한 불투과성 사각형 수중방파제의 Bragg 반사 해석 (Analysis of Bragg Reflection of Waves due to Rectangular Impermeable Submerged Breakwaters with Two-Dimensional Finite Element Method)

  • 조용식;정우창
    • 한국수자원학회논문집
    • /
    • 제36권3호
    • /
    • pp.447-454
    • /
    • 2003
  • 본 연구에서는 유한요소법을 이용하여 일정 수심상에서 사각형 형상의 불투과성 수중방파제에 의한 파랑의 Bragg 반사를 수치적으로 고찰하였다. 유한요소법에 의해 계산된 반사율은 수리모형실험을 통해 얻어진 결과와 비교하였을 때 비교적 잘 일치하였으며, 고유함수전개법에 의한 결과와도 좋은 일치를 나타내었다. 그밖에 본 연구에서 개발된 모형은 불투과성 수중방파제의 폭과 길이의 변화에 따른 반사율 계산에 적용되었다.

UCA 기반 OAM 다중모드 전송시스템에 대한 지면 반사의 영향 (Ground Reflection Effect on OAM Multi-Mode Transmission System Based on Uniform Circular Arrays)

  • 유정웅;손해원
    • 한국전자파학회논문지
    • /
    • 제29권1호
    • /
    • pp.28-31
    • /
    • 2018
  • 본 논문에서는 균일원형배열(UCA) 안테나를 이용한 궤도각운동량(OAM) 다중모드 전송시스템의 채널용량에 대하여지면 반사가 미치는 영향을 수치적으로 분석하였다. 지면 반사는 OAM 다중모드 간 간섭을 유발하고 시스템의 심각한 성능 저하를 가져온다. 전송거리가 증가함에 따라 OAM 다중모드 채널용량은 지면 반사의 영향으로 인하여 매우 작아진다. 지면 반사의 영향을 줄이기 위해서는 UCA의 높이를 높이고, 배열 소자의 지향성을 높이는 것이 필요하다.

100 W급 LED 보안 등기구용 비대칭 배광의 2차 렌즈 설계 (Secondary Optics Design of Dissymmetrical Light Distribution for 100 W LED Safety Luminaires)

  • 신익태;양종경;이동진;박대희
    • 한국전기전자재료학회논문지
    • /
    • 제23권6호
    • /
    • pp.471-476
    • /
    • 2010
  • This paper has studied dissymmetrical light distribution design using the secondary optics in the simulation. fundamental Lambertian radiation distribution based on LED has been cut off by the secondary optics, and the first surface slope of lens and second surface slope of total reflection area have been calculated through formula. PMMA (the index of refraction: 1.49361) which is material of lens has been selected. critical angle($42.02993^{\circ}$) between Air and PMMA has been calulated by snell's law, and total reflection angle slope has been selected about $16.67^{\circ}$ to occur the total reflection. when the first surface slope and the second surface slope has been set up, Rays of all total reflection area have generated the total reflection. finally, designed LED Module has been estimated by Korean Industrial Standards for LED safety street lighting. dissymmetrical light distribution have been analyzed with reached effect of road illuminance, and average road illuminance which are each 70.6 lx, 40.35 lx, and 25.88 lx have been satisfied with Korean Industrial Standards for LED safety street lighting.

Radiation-Laminar Free Convection in a Square Duct with Specular Reflection by Absorbing-Emitting Medium

  • Byun, Ki-Hong;Im, Moon-Hyuk
    • Journal of Mechanical Science and Technology
    • /
    • 제16권10호
    • /
    • pp.1346-1354
    • /
    • 2002
  • The purpose of this work is to study the effects of specularly reflecting wall under the combined radiative and laminar free convective heat transfer in an infinite square duct. An absorbing and emitting gray medium is enclosed by the opaque and diffusely emitting walls. The walls may reflect diffusely or specularly. Boussinesq approximation is used for the buoyancy term. The radiative heat transfer is evaluated using the direct discrete ordinates method. The parameters under considerations are Rayleigh number, conduction to radiation parameter, optical thickness, wall emissivity and reflection mode. The differences caused by the reflection mode on the stream line, and temperature distribution and wall heat fluxes are studied. Some differences are observed for the categories mentioned above if the order of the conduction to radiation parameter is less than order of 10$\^$-3/ fer the range of Rayleigh number studied. The differences at the side wall heat flux distributions are observed as long as the medium is optically thin. As the top wall emissivity decreases, the differences between these two modes are increased. As the optical thickness decreases at the fixed wall emissivity, the differences also increase. The difference of the streamlines or the temperature contours is not as distinct as the side wall heat flux distributions. The specular reflection may alter the fluid motion.

직립벽 앞에 놓인 일정깊이 잠긴 슬릿판에 의한 반사율 해석 (On an Analysis of Reflection Coefficients by a Partially Immersed Slotted Plate with a Back Wall)

  • 조일형
    • 한국해안해양공학회지
    • /
    • 제15권3호
    • /
    • pp.143-150
    • /
    • 2003
  • 고유함수전개법을 사용하여 수직벽 앞에 일정깊이 잠긴 슬릿판과 규칙파의 상호작용문제를 살펴보았다. 슬릿판에 의한 반사율에 영향을 미치는 주요 설계변수들은 공극율, 잠긴깊이, 챔버길이, 입사각도, 입사파의 주파수임을 확인하였다 슬릿판의 공극율이 0.1일 때 반사율이 전주파수에 걸쳐서 최소가 됨을 밝혔다. 반사율에 대한 해석결과와 Zhu(2001) 모형실험결과를 챔버길이와 잠긴깊이 그리고 입사파의 주기를 변화시키면서 비교한 결과, 두 결과는 서로 잘 일치하였다. 본 해석방법은 슬릿판 후면에서 발생한 박리에 의한 에너지 손실을 정확히 고려할 수 있으므로 슬릿 케이슨 방파제 제작에 필요한 설계정보를 제공할 것이다.

유전박막이 도포된 나노원뿔 패턴된 단결정 Si 기판의 광특성 (Optical Characteristics of Nanocone-patterned c-Si Wafers Coated with Dielectric Thin Films)

  • 김은아;박지민;고은지;김동욱
    • Current Photovoltaic Research
    • /
    • 제5권2호
    • /
    • pp.55-58
    • /
    • 2017
  • We investigated the influences of dielectric thin film coating on the optical characteristics of c-Si wafers with nanocone (NC) arrays using finite-difference time-domain (FDTD) simulations. Dielectric thin films on high-refractive-index surface can lower optical reflection and reflection dips appear at the wavelengths where destructive interference occurs. The optical reflection of the NC arrays was lower than that of the dielectric-coated planar wafer in broad wavelength range. Remarkable antireflection effects of the NC array could be attributed to beneficial roles of the NCs, including the graded refractive index, multiple reflection, diffraction, and Mie resonance. Dielectric thin films modified the optical reflection spectra of the NC arrays, which could not be explained by the interference alone. The optical properties of the dielectric-coated NC arrays were determined by the inherent optical characteristics of the NC arrays.

1D Wavelet Filtering for Groundroll Suppression in Land Seismic-Reflection Data

  • Sa, Jin-Hyeon;Lee, Jae-Eun;Kim, Sung-Soo;Kim, Ji-Soo
    • 지질공학
    • /
    • 제27권4호
    • /
    • pp.513-518
    • /
    • 2017
  • Groundroll is a coherent noise showing dispersive behavior in land seismic-reflection records and its rejection has been a stubborn problem in data processing because they severely degrade the continuities and resolution of reflection signals. Conventional processing schemes of attenuating noises are the kind of frequency filtering (i.e., bandpass and f-k) that uses the Fourier transform (FT) along the entire trace in the time domain. To suppress them in this study, 1D wavelet filtering (WT) that can control time-varying frequency properties is tested and performed in the land-based synthetic and field seismic data. The results are compared to the ones from conventional filtering techniques in terms of continuities and resolution of reflection events. This filtering technique enhanced the reflection events by effectively eliminating the dispersive groundroll and random noises with control of time-scale function on wavelet domain.

봄철 강릉지역에서 발생하는 강풍에 대한 연구 (Severe Downslope Windstorms of Gangneung in the Springtime)

  • 장욱;전혜영
    • 대기
    • /
    • 제18권3호
    • /
    • pp.207-224
    • /
    • 2008
  • Severe downslope windstorms observed at Gangneung, Korea in the springtime during the last 30 years are studied to understand their generation mechanisms. 92 severe wind cases are selected for which the maximum instantaneous wind speeds exceed two standard deviation of total mean plus ($18.7ms^{-1}$). They are categorized into the three mechanisms (hydraulic jump, partial reflection, and critical-level reflection) proposed in previous studies based on the flow condition, which is calculated using the wind and temperature profile observed at one upstream rawinsonde station, Osan. Among the three, partial reflection is found to be the most frequent mechanism for the last 30 years (1976 - 2005). To understand the role of inversion in generating severe downslope windstorms, horizontal velocity perturbation was calculated analytically for the atmosphere with an inversion layer. It turned out that the intensity of downslope wind was increased by inversion layer of specific heights, which are well matched with the observations. For better understanding the generation mechanisms, two-dimensional numerical simulations are conducted for the 92 severe wind cases using the ARPS model. In most simulations, surface wind speed exceeds the value of the severe-wind criterion, and each simulated case can be explained by its own generation mechanism. However, in most simulations, the simulated surface wind speed is larger than the observed, due to ignoring the flow-splitting effect in the two-dimensional framework.

평면 LED 램프에서의 초음파 센서의 반사특성을 고려한 위치측정 기법 (Location Measurement method Depending on Reflection Characteristics of Ultrasonic Sensors for The Flat LED Lamp)

  • 허영록;윤장희;염정덕
    • 조명전기설비학회논문지
    • /
    • 제27권12호
    • /
    • pp.38-43
    • /
    • 2013
  • In this paper, the location measurement method for the reliable location data using ultrasonic sensors is proposed for the dimming control of the LED flat lamp. The measurement errors depending on the reflection angle of the object have to be considered to obtain the reliable location data in the ultrasonic sensors. In the experiment, the cause of the measurement errors depending on reflection angle is analyzed and velocity change of ultrasonic wave depending on reflection angle is measured. And the location measurement method depending on velocity change of ultrasonic wave is proposed. From the results, the average absolute deviation of the x-coordinates was 1.47cm when the location measurement method was considered, and it was closer to the true values than the average absolute deviation of the x-coordinates which was 5.89cm without regard to the reflection angle.