• 한국안광학회지
• /
• 제2권1호
• /
• pp.91-95
• /
• 1997

균일하지 않게 코팅된 적분구의 효율성에 대한 일반적인 방정식이 제시되었다. 제시한 가정은 적분구 내부는 완전한 구형이고 모든 구내벽은 입사된 광선에 대해 완전하게 확산적으로 반사한다는 것이다. 제시한 방정식을 절대반사율 측정과 반구 반사율 측정이 혼합된 적분구에 대해서 기본적인 응용성을 시험하였다.

• 산업융합연구
• /
• 제21권3호
• /
• pp.189-194
• /
• 2023

최근에 유연 전자소자에 대한 다양한 연구가 이루어지고 있다. 본 연구에서 유연 전자소자용 금속기반의 투명 전도막으로 Ag 나노와이어로 그 가능성을 평가하였다. 이를 위해 신개념의 브러시 코팅법과 상압플라즈마 기반의 아르곤 플라즈마 증발법으로 Ag 나노 물질을 글라스에 형성시켰다. 먼저 브러시로 Ag 용액을 글라스에 코팅하고, 남아있는 용매는 상압플라즈마로 제거한다. 이 용매 증발 과정에서 상압플라즈마와 용매의 반응에 의해 소리가 발생하기 때문에 용매의 남아있는 정도를 확인할 수 있다. 막의 코팅 횟수에 따른 반사도, 투과도, 흡수도와 같은 광특성 및 전기적인 결과들을 관찰하기 위하여 최대 5번 코팅하여 그 결과들을 분석하였다. 광에 의한 Ag 나노와이어와의 상호작용을 조사할 목적으로 빛의 파장을 200nm부터 800nm까지 변화시키면서 반사도 및 투과도를 측정하였으며, 반사도와 투과도 모두 5번 코팅한 샘플에서 가장 큰 변화를 나타내었다. 특히 흡수도의 경우 반사도나 투과도의 데이터와는 다르게 코팅에 따라 Ag 나노와이어의 빛에 대한 흡수도 증가 추이를 명확하게 확인할 수 있었다. 전기적인 특성은 4번 이상 코팅했을 때부터 큰 변화가 있었으며, 특히 5번 진행시 kΩ/cm2보다 낮아진 저항값을 보였다. 이러한 광 및 전기적인 결과들을 기반으로, 향후 전자소자에 적용하여 투명 전도막으로의 가능성을 검증할 계획이다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 추계학술대회 논문집
• /
• pp.179-182
• /
• 1994

We have investigated the optical and electrochromic properties of molybdenum oxide(MoO$_3$) films by thermal evaporation. The MoO$_3$films deposited at substrate temperatures below 200$^{\circ}C$ are found to be amorphous and annealed films at temperature 300$^{\circ}C$ for 1 hour in air are crystalline. The optical energy gap calculated from the transmittance and reflectance spectra of MoO$_3$ films is near 2.75 eV and 3.25 eV for amorphous films and crystalline films, respectively. The MoO$_3$ thin films exhibit light blue to dark blue optical modulation on lithium intercalation and have a uniform transmittance modulation over a wavelength range of 300∼1100 nmcompared to tungsten oxide films.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1346-1348
• /
• 1998

Tungsten oxide($WO_3$) thin films were prepared by reactive magnetron sputtering in an $Ar/O_2$ atmosphere from a compressed powder $WO_3$ target and their electrochromic(EC) phenomena were investigated. PEO-$LiClO_4$-PC polymer electrolyte can easely be formed into thin films and showed high transmittance. Such electrolyte have electrochromic properties suitable for large-scale electrochromic devices. For the devices using $WO_3$ thin films of 1500, 2500, $4000{\AA}$ thickness with glass/ITO/$WO_3$/PEO-$LiClO_4$-PC/ITO/glass structure, an optical modulation of $50{\sim}60%$ were obtained at a potential range of $1{\sim}2V$. It has shown that transmittance and reflectance of light could be electrically controlled by low applied voltage.

• Current Photovoltaic Research
• /
• 제10권3호
• /
• pp.73-76
• /
• 2022

BIPV (Building Integrated Photovoltaic) supplemented the minimum area problem required when installing existing solar modules. However, in order to apply it to buildings, research was needed to increase the aesthetics of solar modules and use them as a design. Accordingly, modules with color applied to the entire surface of the photovoltaic module were being developed, but there was a disadvantage of low power. Therefore, by dividing and bonding the cell strips, it was possible to improve the output power by applying a shingled technology in which other divided cells overlap in a busbar region where light couldn't be received. Shingled technology was advantageous for color modules because the front busbar part that degrades aesthetics was removed. In this research, four color shingled solar modules (Green, Yellow, Blue, Gray) were manufactured and power degradation was analyzed by measuring transmittance and reflectance. Gray color had 80.83% transmittance, which was 31.31% higher than Yellow, resulting in a power difference of 4.45 W.

• 전기학회논문지
• /
• 제62권3호
• /
• pp.365-370
• /
• 2013

Generally, photovoltaic modules consist of glass, EVA, Solar Cell, back sheet and ribbon. But EVA, solar cell, ribbon affect electric output with temperature. EVA is a change in the transmittance of light from the sun. In addition, the solar cell output is decreased with temperature and the ribbon increases resistance. Transmittance and reflectance of glass and EVA were measured. In this paper, the characteristics of the components of PV module as EVA and Glass, ribbon were studied by variable temperature. effects on material properties investigated. As a result, glass is independent in temperature variation. EVA was the reduction 1~4% in transmittance. Solar cell decrease 0.469[%/$^{\circ}C$] in electric output by temperature variation. Other factors was controlled in solar cell..

• 한국산업융합학회 논문집
• /
• 제4권1호
• /
• pp.35-40
• /
• 2001

A spectral measurement system for reflection and transmission properties by using an optical fiber and an ellipsoidal mirror was newly developed. The hemispherical reflectance and transmittance spectra of several heating resisting ceramics materials were measured from visible to middle infrared region. The directional characteristics of reflection and transmission were also investigated in consideration of the absorptance. The measured data were analyzed by using a four flux model of radiation transfer, The radiation properties could be estimated by the obtained scattering and absorption coefficient spectra.

• Journal of the Optical Society of Korea
• /
• 제2권1호
• /
• pp.30-33
• /
• 1998

We present the analysis of phase-shifted fiber Bragg gratings by coupled-mode equations. The transmission is expressed as that of a Fabry-Perot resonator with complex reflectance and complex transmittance. The transmission spectrum, the effective cavity length, and the behaviors with different phase-shifts are investigated. A very flattered transmission peak is obtained by introducing three phase-shifts in a grating.

• 대한전자공학회논문지
• /
• 제24권2호
• /
• pp.238-241
• /
• 1987

ITO thin film was prepared by the electroless deposition technique. ITO thin film had a high transmittance in the visible region and a high reflectance in the near infrared region. The energy gap of the thn film (Sn/Im=0.1) was 4.05 eV, the carrier concentration was 2x10**21 cm**-3, and the electric resistivity was 1.5x10**-3 ohm-cm. We confirmed that ITO thin film was a degenerated n-type semiconductor.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1419-1424
• /
• 2006

We could reduce the reflection from PET(polyethylene terephthalate) film surface by natural plasma etching which does not use etch masks. The plasma etched PET film showed lower reflectance and higher transmittance which is resulted by making subwavelength structure(SWS) on the film surface by the plasma etch rate difference between the amorphous and crystalline region in the surface of PET film.