• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 추계학술대회 논문집
• /
• pp.225-228
• /
• 2008

The electricity supply and demand to be stable to a system link increase of the variance power supply and operation are requested in jeju Island electricity system. A short-term Load forecasting which uses the characteristic of the Load is essential consequently. We use the interrelationship of the electricity Load and change of a summertime temperature and data refining in the paper. We presented a short-term Load forecasting algorithm of jeju Island and used the correlation coefficient to the criteria of the refining. We used each temperature area data to be refined and forecasted a short-term Load to an exponential smoothing method.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.305-305
• /
• 2007

고경도 및 내침식재료가 새로운 기계구조 및 기계 절삭공구재료로서 각광을 받고 있으며 질화붕소(BN)는 고융점, 고경도의 물리적 특성으로 다이아몬드 대체 물질로 주목되고 있다. 원하는 질화붕소의 합성을 위해서는 출발 원료와 합성법에 의존하는 것으로 보고되고 있다. 본 연구에서는 붕소 산화물과 환원제로써 활성 탄소를 출발 원료로 하였으며 치환제로써 질소를 사용하여 기상 반응로에서 질화붕소를 합성하였다. 합성된 시료는 XRD, SEM, PSA 등으로 물성을 측정하였고 합성 변수에 따라 순도의 차이를 보였으며, 본 연구를 통하여 최적의 합성 조건을 제시할 수 있었다.

• 펄프종이기술
• /
• 제35권4호
• /
• pp.1-7
• /
• 2003

In this study, fiber mechanical pretreatment before refining was executed with the addition of papermaking addiditives to find synergistic effects on fiber property improvement. Three fiber furnishes (SwBKP, KOCC, and BCTMP), and five different additives (CMC, CPAM, PEO, NaOH, $Na_2O_2$) were used. It was confirmed again that fiber mechanical pretreatment using Hobart mixer was a special way to modify fiber properties, where fiber WRV (water retention value) increases without losing fiber length. For SwBKP, addition of small amount of CMC (0.2％ OD basis), and for KOCC, PEO (0.2％ OD basis) caused additional significant improvement of the fiber furnish properties, respectively. Other additives did not cause adverse effects on the mechanical pretreatment, or better. For BCTMP, NaOH addition followed by mechanical pretreatment caused more than 20％ improvement in tensile and tear strength simultaneously, compared to the control. The yellowing caused by the treatment of NaOH on BCTMP could be minimized by using $Na_2O_2$ without losing the positive effect of NaOH.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.479-484
• /
• 2006

The pore structures of paper were modified by the application of the blending of pulp, refining, and filler particle size and ash content. It was conformed that the reflectivity of paper can be modified by the combination of above parameters. It was also found that the modifications of reflectivity of paper were very close relation with pore structure, such as average pore size, pore size distribution and porosity. The average pore size was decreased with addition of HwBKP, but showed smaller particle size than those made from 100% HwBKP. Refining of pulp decreased both average pore size and the reflectivity of paper. The pore size distribution of filled paper can be varied by the combination of filler particle size and ash content.

• 식품과학과 산업
• /
• 제51권2호
• /
• pp.100-113
• /
• 2018

To obtain an edible grade oil from crude oil extracted from oil-bearing materials, it is generally necessary to carry out a refining process composed with degumming, deacidification, bleaching, and deodorization, to remove undesirable matters which affect the quality and shelf life of oils. The main purpose of degumming is to remove gum material mainly consisted with phospholipids. Phospholipases convert nonhydratable phospholipids into their hydratable forms which can be removed by centrifugation. In comparison with conventional water and acid degumming processes, enzymatic degumming can result the lower phosphatide content in oil than conventional processes. The enzymatic degumming can be conducted with the reduced amount of acid, and contributes to generate less amount of wastewater, decrease of operating cost, and increase oil recovery yield. The phospholipases used in enzymatic degumming process are phospholipase A1, A2, B, and C.

• 대한금속재료학회지
• /
• 제47권3호
• /
• pp.182-187
• /
• 2009

The molten salt electrolysis is applied to reduce titanium dioxide to titanium metal using calcium chloride as an electrolyte and the reaction mechanism of the reduction process is examined by analyzing the reaction products. The process conditions to obtain titanium metal for $900^{\circ}C$ correspond to 2.9~3.2 V and 24 hours. The reaction products for 2.9 V at $900^{\circ}C$ include irregular-shaped titanium oxides such as $Ti_4O_7$, $Ti_3O_5$ and $Ti_2O_3$ and polyhedral $CaTiO_3$. Using these microstructure analysis, the sequential reaction mechanism for the electrochemical reduction of titanium dioxide to titanium is proposed.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.49-49
• /
• 2003

• 석유와에너지
• /
• 5호통권75호
• /
• pp.106-116
• /
• 1987

이 논문은 PEL Pacific Ltd & Joe Raeber Associates 주관으로 지난 4월 23일부터 25일까지 싱가포르에서 열린 「Asia-Pacific Refining and Trading Opportunities 」관한 Workshop에 참석하여 주제 발표자들의 발표논문 중에서 주요 내용만을 요약 작성하였음을 밝혀둔다. <필자 주>

• 열처리공학회지
• /
• 제22권3호
• /
• pp.169-176
• /
• 2009

• 한국막학회:학술대회논문집
• /
• 한국막학회 1999년도 춘계 총회 및 학술발표회
• /
• pp.75-77
• /
• 1999