• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.1
• /
• pp.50-55
• /
• 2009

The monitoring efficiency of the aircraft noise monitoring stations is decided to the reference noise level and the infringement of each monitoring stations. We calcurates the monitoring efficiency of three noise monitoring station among twelve in the vicinity of Gimpo Int'l Airport. As a result, the monitoring efficiency shows that the noise monitoring stations No#3, No#5 and No#6 are 14.3%, 18.5% and 29.3% respectively, Among them No#6 staion looks higher efficiency than another two stations because of underneath the flight trackas.

• Nutrition Research and Practice
• /
• v.16 no.sup1
• /
• pp.37-46
• /
• 2022

The Korea National Health and Nutrition Examination Survey of 2013 to 2017 reported that the average protein consumption of the Korean population is above the current recommended nutrient intake of protein proposed by the Dietary Reference Intakes for Koreans. Some health professionals and the media often advise consuming diets high in protein for promoting metabolic regulation, weight control, and muscle synthesis. However, due to lack of scientific evidence, the validity and safety of high protein consumption are yet to be fully ascertained. The present review assesses recent evidence published in 2014-2020 from human studies, focusing on adequate protein intake and protein sources for the prevention of chronic diseases, particularly metabolic disorders and sarcopenia.

• Advances in concrete construction
• /
• v.5 no.5
• /
• pp.451-468
• /
• 2017

The problem of reducing the self-weight of reinforced concrete structures is very important issue. There are two approaches which may be used to reduced member weight. The first is tackled through reducing the cross sectional area by using voids and the second through using light weight materials. Reducing the weight of slabs is very important as it constitutes the effective portion of dead loads in the structural building. Eleven slab specimens was casted in this research. The slabs are made one way though using two simple supports. The tested specimens comprised three reference solid slabs and eight styropor block slabs having (23% and 29%) reduction in weight. The voids in slabs were made using styropor at the ineffective concrete zones in resisting the tensile stresses. All slab specimens have the dimensions ($1100{\times}600{\times}120mm$) except one solid specimens has depth 85 mm (to give reduction in weight of 29% which is equal to the styropor block slab reduction). Two loading positions or cases (A and B) (as two-line monotonic loads) with shear span to effective depth ratio of (a/d=3, 2) respectively, were used to trace the structural behavior of styropor block slab. The best results are obtained for styropor block slab strengthened by minimum shear reinforcement with weight reduction of (29%). The increase in the strength capacity was (8.6% and 5.7%) compared to the solid slabs under loading cases A and B respectively. Despite the appearance of cracks in styropor block slab with loads lesser than those in the solid slab, the development and width of cracks in styropor block slab is significantly restricted as a result of presence a mesh of reinforcement in upper concrete portion.

• PNF and Movement
• /
• v.17 no.1
• /
• pp.93-101
• /
• 2019

Purpose: This study aimed to investigate lower extremity muscle activation to the variable weight shift on the affected side of patients with hemiplegia. Methods: Eighteen patients with chronic hemiplegia volunteered to participate in this study. All participants performed three types of weight shift (sideways, forward, and backward) in limits of stability on the affected side. Muscle activation in a paralyzed leg was measured with electromyography on the gluteus medius, tensor fasciae latae, rectus femoris, and biceps femoris; furthermore, the attached area was recommended by SENIAM projects. Each weight shift was performed three times, and then the mean value of the three measurements was analyzed. The data were analyzed by measuring the symmetrically standing position with the reference voluntary contraction (RVC) and was standardized with the percentage of RVC method. Results: No significant difference in lower extremity muscle activation occurred according to the three types of variable weight shift. However, significant differences in lower extremity muscle activation did occur with each weight shift position. In addition, activation increased at the rectus femoris and decreased at the gluteus medius and tensor fasciae latae. Conclusion: Hip abductor muscle strength training and variable weight shifts on the affected side must increase to improve patients'balance and limits of stability.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.3
• /
• pp.164-172
• /
• 2004

This paper presents the comparison results of some kinds of control method in circumstance of eccentric load. The plant to be controlled is a computed tomography(CT) driven by a permanent magnet synchronous motor. In a CT system, many units are attached on the rotationally part of a gantry such as x-ray tube, detector, heat exchanger, and data acquisition unit etc. Therefore keeping many components to balance which have different weight is not easy; this is inescapable problem in the all CT systems. To solve this problem against eccentric load, some kinds of control method have been compared and analysed by using protype CT. From the experimental results it is vilified that the CT drive system with model reference control method indicates higher speed regulation ability regardless of variable eccentric weight and uncertain position, and also in the limit condition of constant eccentric weight and fixed position, the compensation method with sinusoidal form is a strong candidate in view of speed ripple reduction.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.314-320
• /
• 2014

Field balancing is required in any kind of phase information for the determination location balancing mass toward a rotor unbalance mass. Phase or phase angle is a measurement of the relationship of how one vibration signal which relates to another vibration signal and is commonly used to calculate the placement of balance weight. In this paper, A right guideline shows the photo optical speed sensor as the external keyphasor is a very useful when diagnosing machinery vibration problems on considering a phase lag comparing to the laser optical speed sensor. Some experimental results generate the interesting phase errors when appling to a wrong conditions. So, Usage of photo optical speed sensor which is used primarily to measure the shaft rotating speed serves as a reference for measuring vibration phase information has effect on the placement of phase angle how it was misunderstood. This paper will help a right method to search for the position of balancing weight and serves as baseline for further measurements using low cost and much easier user convenience. It is concluded that the propose baseline is likely to be applicable to apply to the practical field balancing weight.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.2
• /
• pp.101-107
• /
• 2015

Field balancing is required in any kind of phase information for the determination location balancing mass toward a rotor unbalance mass. Phase or phase angle is a measurement of the relationship of how one vibration signal which relates to another vibration signal and is commonly used to calculate the placement of balance weight. In this paper, A right guideline shows the photo optical speed sensor as the external KeyPhasor is a very useful when diagnosing machinery vibration problems on considering a phase lag comparing to the laser optical speed sensor. Some experimental results generate the interesting phase errors when appling to a wrong conditions. So, Usage of photo optical speed sensor which is used primarily to measure the shaft rotating speed serves as a reference for measuring vibration phase information has effect on the placement of phase angle how it was misunderstood. This paper will help a right method to search for the position of balancing weight and serves as baseline for further measurements using low cost and much easier user convenience. It is concluded that the propose baseline is likely to be applicable to apply to the practical field balancing weight.

• Korean Journal of Organic Agriculture
• /
• v.24 no.1
• /
• pp.115-122
• /
• 2016

The main purpose of the current study was to compare quality of eggs 1) produced from hens housed in battery cages vs. free range, 2) from young vs. old hens, and 3) tagged with the lowest vs. the highest price in a local franchised mart. The ages of hens, at which their eggs were used for the analysis of quality, were 70 weeks old in the experiment 1, 22 and 47 weeks old in the experiment 2, and were unknown in the experiment 3. Eggs were analyzed for weight, albumen height, Haugh unit, shell color, shell strength, shell thickness, shell weight, yolk color, yolk weight, and egg white weight. In the experiment 1, significant differences were detected between two housing systems in shell color, shell weight, yolk color, and yolk weight (P<0.05), but not in egg weight, albumen height, Haugh unit, shell strength, shell thickness, and egg white weight (P>0.05). Although egg weight was slightly but not significantly higher in battery cages by 2.2 g than in free range, yolk weight was significantly higher in battery cage (P<0.05). On the contrary, shell color was greatly increased in free range system by 68.5% compared with battery cage. In the experiment 2, there were significant differences between young and old hens in egg weight, albumen height, Haugh unit, shell strength, shell weight, yolk color and yolk weight (P<0.05). Egg weight, shell weight, yolk color and yolk weight were increased in old hens than young hens while albumen height, Haugh unit, and shell strength were decreased. In the experiment 3, egg weight, albumen height, Haugh unit, shell weight, and egg white weight were significantly higher in the highest priced eggs than the lowest ones (P<0.05), whereas shell strength and yolk color were lower (P<0.05) but shell color, shell thickness and yolk weight were not different (P>0.05). So, egg freshness was clearly higher in the highest priced ones than in the lowest (P<0.05). Due to the limited information on raising and husbandry of laying hens whose eggs were tested for egg quality in the current study, the present results should be cautiously interpreted while contributing to the future study as a basis in this field.

• Journal of radiological science and technology
• /
• v.41 no.1
• /
• pp.13-24
• /
• 2018

Liver size is an important component in the diagnosis and follow-up of diffuse liver disease when testing for liver disease using ultrasonography. However, difficulties lies in determining the presence of hepatomegaly and liver atrophy because the method used for measuring liver size differs from one examiner to another and there is no relevant standard based on body build. The present study aims to propose a more objective method for liver size measurement and a reference range based on body build. A total of 260 normal adults (130 males, 130 females) participated in the study. Ultrasonography was performed in all participants to measure the size of the right lobe, left lobe, quadrate lobe, and caudate lobe of liver. Based on Physique Index(PI), a value derived from multiplying weight(kg) by height($m^2$), size of physique was divided into three groups including Group I with PI<150, Group II with $150{\leq}PI{\leq}250$, and Group III with PI>250. Thus, mean liver size by PI and a reference range with 95% reliability were suggested. The superoinferior diameter of right lobe was $12.34{\pm}1.18cm$ in males and $11.07{\pm}0.93cm$ in females, and its reference range was 10.64~11.0cm for Group I, 11.78~12.12cm for Group II, and 13.02~13.84cm for Group III. The anteroposterior diameter(T) of left lobe was $5.93{\pm}1.09cm$ in males and $5.18{\pm}0.99cm$ in females, and its reference range was 4.77~5.17cm for Group I, 5.49~5.79cm for Group II, and 6.68~7.44cm for Group III. The transverse diameter was $3.51{\pm}0.60cm$ in male participants and $3.42{\pm}0.49cm$ in female participants and its reference range was 3.29~3.51cm for Group I, 3.36~3.55cm for Group II, and 3.52~4.0cm for Group III. The caudate lobe index was $11.65{\pm}2.88cm^2$ in males and $9.62{\pm}2.18cm^2$ in females and its reference range was $8.83{\sim}9.75cm^2$ for Group I, $10.62{\sim}11.47cm^2$ for Group II, and $11.89{\sim}14.26cm^2$ for Group III. As a basic measurement method of liver size, the present study suggests measuring the superoinferior diameter for right liver lobe, the anteroposterior diameter for left liver lobe, the transverse diameter for quadrate lobe, and the caudate lobe index for caudate lobe. It is expected that this method along with its relevant reference range can be used as useful indicators in determining hepatomegaly and liver atrophy upon the diagnosis and follow-up testing of diffuse liver disease.

• Journal of Nutrition and Health
• /
• v.55 no.1
• /
• pp.10-20
• /
• 2022

This article evaluated levels of Estimated Average Requirements (EARs), Reference Nutrient Intakes (RNIs), and Acceptable Macronutrient Distribution Ranges (AMDRs) of protein using the recently revised Dietary Reference Intakes (DRIs) for Koreans (2020). Dietary protein requirements are based on amounts sufficient to satisfy physiological demands to accomplish nitrogen equilibrium. The same principle was applied to estimate EARs and RNIs, for adults in DRIs conducted in 2015 and 2020 in Koreans. EAR was estimated to be 0.73 g/kg body weight/day, according to data (0.66 g/kg body weight/day) obtained using the nitrogen balance method and adjusted by efficiency of protein use (90%). RNI was calculated as EAR increased by an amount equal to twice the standard deviation of an age group so as to cover 97.5% of the group and was found to be 0.91 g/kg body weight/day. For weaned infants, children, and adolescents, growth requirement was added to estimate EAR. In particular, growth requirement was adjusted by efficiency of protein use in the revised EAR, which led to higher EARs for weaned infants, children, and adolescents of both genders as compared with 2015 DRIs. The AMDR for protein was set at 7%-20% of energy intake, which was the same as 2015 DRIs. Current, average protein intake by the Korean population is almost twice times the EAR, which suggests it might be better to increase the minimal margin for AMDR. However, it was not adjusted in this revision due to lack of evidence.