• Elastomers and Composites
• /
• v.58 no.1
• /
• pp.32-43
• /
• 2023

The worldwide use of polyurethane foam products generates large amounts of waste, which in turn has detrimental effects on the surroundings. Hence, finding an economical and environmentally friendly way to dispose of or recycle foam waste is an utmost priority for researchers to overcome this problem. In that sense, the glycolysis of waste flexible polyurethane foam (WFPF) from automotive seat cushions using different industrial-grade glycols and potassium hydroxide as a catalyst to produce recovered polyol was investigated. The effect of different molecular weight polyols, catalyst concentration, and material ratio (PU foam: Glycols) on the reaction conversion and viscosity of the recovered polyols was determined. The obtained recovered polyols are obtained as single or split-phase reaction products. Besides, the foaming characteristics and physical properties such as cell morphology, thermal stability, and compressive stress-strain nature of the regenerated flexible foams based on the recovered polyols were discussed. It was observed that the regenerated flexible foams displayed good seating comfort properties as a function of hardness, sag factor, and hysteresis loss compared to the reference virgin foam. With the growing demand for a sustainable and circular economy, a global valorization of glycolysis products from polyurethane scraps can be realized by transforming them into profitable substances.

• Geomechanics and Engineering
• /
• v.29 no.4
• /
• pp.471-486
• /
• 2022

The effect of segmental joints is one of main importance for the segmental lining design when tunnels are excavated by a mechanized process. In this paper, segmental tunnel linings are analyzed by two numerical methods, namely the Beam-Spring Method (BSM) and the Solid-Interface Method (SIM). For this purpose, the Tehran Subway Line 6 Tunnel is considered to be the reference case. Comprehensive 2D numerical simulations are performed considering the soil's calibrated plastic hardening model (PH). Also, an advanced 3D numerical model was used to obtain the stress relaxation value. The SIM numerical model is conducted to calculate the average rotational stiffness of the longitudinal joints considering the joints bending moment distribution and joints openings. Then, based on the BSM, a sensitivity analysis was performed to investigate the influence of the ground rigidity, depth to diameter ratios, slippage between the segment and ground, segment thickness, number of segments and pattern of joints. The findings indicate that when the longitudinal joints are flexible, the soil-segment interaction effect is significant. The joint rotational stiffness effect becomes remarkable with increasing the segment thickness, segment number, and tunnel depth. The pattern of longitudinal joints, in addition to the joint stiffness ratio and number of segments, also depends on the placement of longitudinal joints of the key segment in the tunnel crown (similar to patterns B and B').

• Journal of Korean Biological Nursing Science
• /
• v.25 no.1
• /
• pp.73-85
• /
• 2023

Purpose: This study focused on identifying the interaction effects of genetic and lifestyle-environmental factors on the development of type 2 diabetes mellitus (T2D). Methods: Study subjects were selected from the Korean Genome and Epidemiology Study (KoGES) from 2001 to 2014. Data on genetic variations, anthropometric measurements, biochemical data, and seven lifestyle factors (diet, physical activity, alcohol drinking, smoking, sleep, depression, and stress) were obtained from 4,836 Koreans aged between 40 and 59 years, including those with T2D at baseline (n = 1,209), newly developed T2D (n= 1,298) and verified controls (n = 3,538). The genetic risk score (GRS) was calculated by using 11 single-nucleotide polymorphisms (SNPs) related to T2D development and the second quartile was used as the reference category. A Cox proportional hazards regression model was used to evaluate the associations of GRS and lifestyle factors with T2D risk, controlling for covariates. Results: Multivariate regression analysis revealed that GRS was the strongest risk factor for T2D, and body mass index (BMI), smoking, drinking, and spicy food preference also increased the risk. Lifestyle/environmental factors that showed significant interactions with GRS were BMI, current smoking, current drinking, fatty food preference, and spicy food preference. Conclusions: Interactions between genetic factors and lifestyle/environmental factors were associated with an increased risk of T2D. The results will be useful to provide a new perspective on genetic profiling for the earlier detection of T2D risk and clues for personalized interventions, which might be more effective prevention strategies or therapies in individuals with a genetic predisposition to T2D.

• Journal of the Korean Society of School Health
• /
• v.36 no.3
• /
• pp.113-125
• /
• 2023

Purpose: The purpose of this study is to develop a model for predicting mental health risk among adolescents based on health behavior information by employing a hybrid machine learning method. Methods: The study analyzed data of 51,850 domestic middle and high school students from 2022 Youth Health Behavior Survey conducted by the Korea Disease Control and Prevention Agency. Firstly, mental health risk levels (stress perception, suicidal thoughts, suicide attempts, suicide plans, experiences of sadness and despair, loneliness, and generalized anxiety disorder) were classified using the k-mean unsupervised learning technique. Secondly, demographic factors (family economic status, gender, age), academic performance, physical health (body mass index, moderate-intensity exercise, subjective health perception, oral health perception), daily life habits (sleep time, wake-up time, smartphone use time, difficulty recovering from fatigue), eating habits (consumption of high-caffeine drinks, sweet drinks, late-night snacks), violence victimization, and deviance (drinking, smoking experience) data were input to develop a random forest model predicting mental health risk, using logistic and XGBoosting. The model and its prediction performance were compared. Results: First, the subjects were classified into two mental health groups using k-mean unsupervised learning, with the high mental health risk group constituting 26.45% of the total sample (13,712 adolescents). This mental health risk group included most of the adolescents who had made suicide plans (95.1%) or attempted suicide (96.7%). Second, the predictive performance of the random forest model for classifying mental health risk groups significantly outperformed that of the reference model (AUC=.94). Predictors of high importance were 'difficulty recovering from daytime fatigue' and 'subjective health perception'. Conclusion: Based on an understanding of adolescent health behavior information, it is possible to predict the mental health risk levels of adolescents and make interventions in advance.

• Journal of Oriental Neuropsychiatry
• /
• v.35 no.1
• /
• pp.15-26
• /
• 2024

Objectives: The objective of this study is to develop a specialized clinical research protocol for acupuncture treatment specifically designed for disaster survivors based on insights from an expert survey. Methods: An expert panel comprising specialists in neuropsychiatry, acupuncture, and clinical research methodology was assembled. Initial data to inform the clinical research protocol design was collected utilizing open-ended responses, multiple-choice questions, and a 5-point Likert scale to gauge agreement levels. Next, this data was disseminated to a panel of experts. A cohesive clinical research protocol was then formulated during a core panel meeting by integrating insights from a panel of 10 experts. Results: The protocol developed herein entails a non-randomized controlled study involving participants aged 19~64 years old who have been identified as high-risk or cautious according to the National Trauma Center screening test. The study design includes the establishment of an active control group, which allows for the assessment of an additional effect through comparison with conventional therapy. The selected acupuncture approach involves a combination of manual acupuncture and ear acupuncture. For clinical outcome assessment, the Clinician-Administered Posttraumatic Stress Disorder Scale for DSM-5 was proposed to gauge trauma symptoms. Representative scales for various domains such as depression, anxiety, anger, insomnia, pain, and quality of life were also provided for reference. Conclusions: The developed protocol is anticipated to streamline the swift design and initiation of clinical trials during disaster scenarios. It is also designed to be scalable, thereby enabling its application in both non-randomized control group studies and single-group before-and-after comparisons.

• Steel and Composite Structures
• /
• v.51 no.3
• /
• pp.243-260
• /
• 2024

Thirteen self-compacting recycled concrete filled aluminium tubular (SCRCFAT) columns were tested under concentric compression loads. The effects of the replacement ratio of the recycled concrete aggregate (RCA) and steel fibre (SF) reinforcement on the structural performance of the SCRCFAT columns were studied. A control specimen (C000) was cast with normal concrete without SF to be reference for comparison. Twelve columns were cast using RCA, six columns were cast using concrete incorporating 2% SF while the rest of columns were cast without SF. Failure mode, ductility, ultimate load capacity, axial deformation, ultimate strains, stress-strain response, and stiffness of the SCRCFAT columns were studied. The results showed that, the peak load of tested SCRCFAT columns incorporating 5-100 % RCA without SF reduced by 2.33-11.28 % compared to that of C000. Conversely, the peak load of tested SCRCFAT columns incorporating 5-100% RCA in addition to 2% SF increased by 21.1-40.25%, compared to C000. Consequently, the ultimate axial deformation (Δ) of column C100 (RCA=100% and SF 0%) increased by about 118.9 % compared to C000. The addition of 2% SF to the concrete mix decreased the axial deformation of SCRCFAT columns compared to those cast with 0% SF. Moreover, the stiffness of the columns cast without SF decreased as the RCA % increased. In contrast, the columns stiffness cast with 2% SF increased by 26.28-89.7 % over that of C000. Finally, a theoretical model was proposed to predict the ultimate loads tested SCRCFAT columns and the obtained theoretical results agreed well with the experimental results.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.2
• /
• pp.117-131
• /
• 2006

A coupled T-H-M(Thermo-Hydro-Mechanical) analysis was carried out for KENTEX (KAERI Engineering-scale T-H-M Experiment for Engineered Barrier System), which is a facility for validating the coupled T-H-M behavior in the engineered barrier system of the Korean reference HLW(high-level waste) disposal system. The changes of temperature, water saturation, and stress were estimated based on the coupled T-H-M analysis, and the influence of the types of mechanical constitutive material laws was investigated by using elastic model, poroelastic model, and poroelastic-plastic model. The analysis was done using ABAQUS, which is a commercial finite element code for general purposes. From the analysis, it was observed that the temperature in the bentonite increased sharply for a couple of days after heating the heater and then slowly increased to a constant value. The temperatures at all locations were nearly at a steady state after about 37.5 days. In the steady state, the temperature was maintained at $90^{\circ}C$ at the interface between the heater and the bentonite and at about $70^{\circ}C$ at the interface between the bentonite and the confining cylinder. The variation of the water saturation with time in bentonite was almost same independent of the material laws used in the coupled T-H-M processes. By comparing the saturation change of T-H-M and that of H-M(Hydro-Mechanical) processes using elastic and poroelastic material mod31 respectively, it was found that the degree of saturation near the heater from T-H-M calculation was higher than that from the coupled H-M calculation mainly because of the thermal flux, which seemed to speed up the saturation. The stresses in three cases with different material laws were increased with time. By comparing the stress change in H-M calculation using poroelasetic and poroelasetic-plastic model, it was possible to conclude that the influence of saturation on the stress change is higher than the influence of temperature. It is, therefore, recommended to use a material law, which can model the elastic-plastic behavior of buffer, since the coupled T-H-M processes in buffer is affected by the variation of void ratio, thermal expansion, as well as swelling pressure.

• Women's Health Nursing
• /
• v.1 no.2
• /
• pp.200-221
• /
• 1995

The confusion of the sense of value on sex is increasing because of the rapid change in social-cultural environment. Also due to a rise in the standard of living, the age of adolescence is getting lower, and so the second sexual marks appear to primary schoolers. At this time in the aspect of the education for the whole man, it's very important for primary schoolers to acquire right knowledge and desirable attitude on sex so that can overcome psychological instability caused by physical growth, be responsible for their behaviors and lead happy lives. This study was made to find out the effects of sex education for the primary schoolers' knowledge and attitude about sex. The study was designed as simulated control group pretest-posttest design, which only pretest was practiced to control group and after sex education only posttest was practiced to experimental group. The data was collected for 18 days from March 13, 1995 to March 31, 1995. The subjects of this study were 130 six-graders in a private primary school in seoul. The control group and experimental group were composed of 65 pupils, each. Sex education consisted of lecture and discussion and the materials were this researcher's own made, 'How do I grow? and related OHP film and video. This education was practiced 40 minutes at a time, at intervals of 2-4 days' six times during 3weeks. For sex knowledge tools, 20 item questionaries on the base of related reference books and contents of this study were used. For sex attitude tools, this researcher's own made 13 item questionaries were used which were revised and complemented and laying stress on the reference books. The data was analyzed through pc-SAS program. The homogeneity test in terms of the general characteristics of experimental and control group was analyzed through $x^2$-test and t-test. And the difference in the primary schoolers' score on knowledge and attitude about sex before and after the sex education was analyzed through t-test and ANCOVA. The results of this study are as follows : 1. The result of the homogeneity test in terms of the general characteristics of the experimental and control group showed that there were significant differences in economic standard($x^2$=2.92, P=0.052) and brotherly ties($x^2$=3.78, P=0.052). 2. Hypothesis 'After sex education, the score of primary schoolers' sex knowledge will be higher than before. 'showed statistically significant difference.(t=11.99, P=.0001) Sex education was practiced under control over subjective view of economic standard and brotherly ties which showed significant difference at the homogeneity test in terms of the general characteristics between the two groups. After this education, the results of comparing the score of primary schoolers' sex knowledge also showed significant difference between the two groups. So hypothesis I was supported since primary schoolers to have education showed noticeable results in the sex knowledge score. (F=16.52, P=.0001) 3. Hypothesis 'After sex education, primary schooler's sex attitude score will be higher than before' showed statistically significant(t=5.08, P=.0001) Sex education was practiced, too, under control over subjective view of economic standard and brotherly ties which showed significant difference at the homogeneity test in terms of the general characteristics between the two groups. Bat this time the results of comparing the primary schoolers' sex attitude showed no significant difference between the two groups. So hypothesis II was rejected since for primary schoolers to have sex education showed no noticeable results in sex attitude score. (F=3.52, P=.0628) These results of the study show that sex education gives affirmative change to the primary schooler's sex knowledge, bat short periods' sex education doesn't give any change to the sex attitude. For the establishment of the pupils' desirable sex attitude, systematic and concrete sex education fit for the pupils' developing stage should be practiced over a long period of time.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.252-252
• /
• 2017

Nowadays water shortage is becoming one of the biggest problems in the Korea. Many different methods are developed for conservation of water. Soil water management has become the most indispensable factor for augmenting the crop productivity especially on soybean (Glycine max L.) because of their high susceptibility to both water stress and water logging at various growth stages. The farmers have been using irrigation techniques through manual control which farmers irrigate lands at regular intervals. Automatic irrigation systems are convenient, especially for those who need to travel. If automatic irrigation systems are installed and programmed properly, they can even save you money and help in water conservation. Automatic irrigation systems can be programmed to provide automatic irrigation to the plants which helps in saving money and water and to discharge more precise amounts of water in a targeted area, which promotes water conservation. The objective of this study was to determine the possible effect of automatic irrigation systems based on soil moisture on soybean growth. This experiment was conducted on an upland field with sandy loam soils in Department of Southern Area Crop, NICS, RDA. The study had three different irrigation methods; sprinkle irrigation (SI), surface drip irrigation (SDI) and fountain irrigation (FI). SI was installed at spacing of $7{\times}7m$ and $1.8m^3/hr$ as square for per irrigation plot, a lateral pipe of SDI was laid down to 1.2 m row spacing with $2.3L\;h^{-1}$ discharge rate, the distance between laterals was 20 cm spacing between drippers and FI was laid down in 3m interval as square for per irrigation plot. Soybean (Daewon) cultivar was sown in the June $20^{th}$, 2016, planted in 2 rows of apart in 1.2 m wide rows and distance between hills was 20 cm. All agronomic practices were done as the recommended cultivation. This automatic irrigation system had valves to turn irrigation on/off easily by automated controller, solenoids and moisture sensor which were set the reference level as available soil moisture levels of 30% at 10cm depth. The efficiency of applied irrigation was obtained by dividing the total water stored in the effective root zone to the applied irrigation water. Results showed that seasonal applied irrigation water amounts were $60.4ton\;10a^{-1}$ (SI), $47.3ton\;10a^{-1}$ (SDI) and $92.6 ton\;10a^{-1}$ (FI), respectively. The most significant advantage of SDI system was that water was supplied near the root zone of plants drip by drip. This system saved a large quantity of water by 27.5% and 95.6% compared to SI, FI system. The average soybean yield was significantly affected by different irrigation methods. The soybean yield by different irrigation methods were $309.7kg\;10a^{-1}$ from SDI $282.2kg\;10a^{-1}$ from SI, $289.4kg\;10a^{-1}$ from FI, and $206.3kg\;10a^{-1}$ from control, respectively. SDI resulted in increase of soybean yield by 50.1%, 7.0% 9.8% compared to non-irrigation (control), FI and SI, respectively. Therefore, the automatic irrigation system supplied water only when the soil moisture in the soil went below the reference. Due to the direct transfer of water to the roots water conservation took place and also helped to maintain the moisture to soil ratio at the root zone constant. Thus the system is efficient and compatible to changing environment. The automatic irrigation system provides with several benefits and can operate with less manpower. In conclusion, improving automatic irrigation system can contribute greatly to reducing production costs of crops and making the industry more competitive and sustainable.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.6
• /
• pp.21-30
• /
• 2014

The purpose of this study was to evaluate human thermal comfort in summer by the type of greenery in parks and to explore planning solutions to supply a comfortable thermal environment in parks. The research was conducted in three different land cover types: a park with multi-wide-canopied trees(WOODLAND), park with grass(LAWN) and park with pavement(PAV) as reference sites in Hamyang-Gun SangrimPark. Field measurements of air temperature, relative humidity and wind velocity, short-wave and long-wave radiation from six directions(east, west, north, south, upward and downward) were carried out in the summer of 2014(August 21-23 and 29-30). Mean Radiant Temperature($T_{mrt}$) absorbed by a human-biometeorological reference person was estimated from integral radiation and the calculation of angular factors. The thermal comfort index PET was calculated by Rayman software, UTCI, OUT_SET$^*$ were calculated using the UTCI Calculator and the Thermal Comfort Calculator of Richard DeDear. The results showed that the WOODLAND has the maximum cooling effect during daytime, reduced air temperatures/$T_{mrt}$ by up to $5.9^{\circ}C/35^{\circ}C$ compared to PAV and lowered heat stress values despite increasing relative humidity values and decreasing wind velocity. While the LAWN had very slight cooling effects during daytime, reduced air temperatures/$T_{mrt}$ by up to $0.9^{\circ}C/3^{\circ}C$ compared to PAV, the improvement effects of the thermal comfort index was very slight. However, during nighttime the microclimatic and radiant conditions of WOODLAND, LAWN, and PAV were similar owing to the absence of solar radiation, reduction of wind velocity and an increase in relative humidity. Because the shading and evapotranspiration effects of the WOODLAND were much greater than the evapotranspiration effects of the LAWN, it can be said that the solutions for supplying comfortable thermal environment in parks are to amplify the green volumes rather than green areas. This study was undertaken to evaluate the human thermal comfort in summer of WOODLAND/LAWN parks and to determine the improvement effects of thermal comfort index. These results can contribute to the provision better thermal comfort for park users during park planning.