• Journal of Electrical Engineering and Technology
• /
• 제8권3호
• /
• pp.544-558
• /
• 2013

This paper proposes a simplified and efficient control scheme for Unified Power Quality Conditioner (UPQC) based on three-level (NPC) inverter capable to mitigate source current harmonics and compensate all voltage disturbances perturbations such us, voltage sags, swells, unbalances and harmonics. The UPQC is designed by the integration of series and shunt active filters (AFs) sharing a common dc bus capacitor. The dc voltage is maintained constant using proportional integral voltage controller. The shunt and series AF are designed using a three-phase three-level (NPC) inverter. The synchronous reference frame (SRF) theory is used to get the reference signals for shunt and the power reactive theory (PQ) for a series APFs. The reference signals for the shunt and series APF are derived from the control algorithm and sensed signals are injected in tow controllers to generate switching signals for series and shunt APFs. The performance of proposed UPQC system is evaluated in terms of power factor correction and mitigation of voltage, current harmonics and all voltage disturbances compensation in three-phase, three-wire power system using MATLAB-Simulink software and SimPowerSystem Toolbox. The simulation results demonstrate that the proposed UPQC system can improve the power quality at the common connection point of the non-linear load.

• 한국통신학회논문지
• /
• 제34권2C호
• /
• pp.181-185
• /
• 2009

프레임 단위로 식별 데이터베이스에 저장된 참조 신호의 특징 벡터와 유사성을 비교하여 입력 신호를 식별하는 경우에, 참조 신호의 특징 벡터로 데이터베이스를 어떻게 구성하는가에 따라 식별 성능은 영향을 받을 수 있다. 즉, 식별 데이터베이스의 구성 방법에 따라 데이터베이스의 크기와 식별을 위한 계산량, 식별 성능 등이 결정되며, 이것은 실제로 수중 천이신호 식별 시스템을 구성할 때 중요한 문제이다. 본 논문에서는 LBG 벡터 양자화 기법을 이용하여 식별 데이터베이스의 크기를 줄여 줌으로써 프레임 기반 수중 천이신호 식별 기법의 효율성을 증가시킬 수 있는 방법을 제안하고, 실험을 통하여 제안한 방법의 타당성을 검증하였다.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 2002년도 춘계학술대회 논문집
• /
• pp.76-79
• /
• 2002

고스트제거기는 수직공백구간 내에 삽입된 고스트제거기준신호 라인을 포획하여 송출된신호가 채널을 경유하면서 겪은 왜곡을 정확히 추정 하여야한다. 그런데 고스트가 심해지면 동기분리가 제대로 되지 않기 때문에 채널추정을 위한 데이터를 포획할 수 없게 된다. 본 논문에서는 이와 같은 문제점을 해결하고자 고스트제거기준신호의 상관특성을 활용해 프리 런(free run)하는 클록신호로 효과적으로 데이터를 획득하는 방법을 제안하고 컴퓨터 시뮬레이션을 동하여 검증하고자 한다. 고스트제거기준신호는 컬러 버스트를 제거하고 신호대잡음비를 개선하고자 4 필드에 걸쳐 그 각성이 반전되기 때문에 데이터 획득과정에서 수반되는 타이밍 지터 문제를 해결하는 방안도 제안한다. 시뮬레이션 결과 타이밍 지터 문제를 샘플간격의 약 4% 이하가지 고스트제거기준신호를 제대로 포획할 수 있음을 알 수 있었다.

• 정보처리학회논문지C
• /
• 제16C권1호
• /
• pp.51-56
• /
• 2009

무선 센서 네트워크에서의 시간 동기 알고리즘은 위치 추적, 데이터 암호화, 중복 이벤트 감지 인식, 정밀한 TDMA 스케줄링 등의 다양한 응용을 위해서 필수적이다. 본 논문에서는 두 노드 사이에서 시간 보정을 위한 클럭 표류율과 기준 신호를 이용한 시간 동기 알고리즘인 CDRS을 제안한다. CDRS는 시간 동기를 위해 두 단계로 구성된다. 첫 번째 단계에서는 LTS를 이용하여 시간 보정 값인 노드간의 시간 차이와 클럭 표류율을 구한다. 이 단계가 끝나면 두 노드는 시간이 맞추어진 상태가 되고 클럭 표류율로 시간 차이를 보정할 수 있게 된다. 두 번째 단계에서는 동기 노드는 주기적으로 기준 신호를 전송한다. 비동기 노드는 수신된 신호를 사용하여 두 노드간 시간 차이를 측정하고, 시간 차이가 최대 허용 오차 범위를 초과하면 다시 첫 번째 단계를 수행한다. 시뮬레이션을 통한 성능 분석 결과, CDRS는 LTS 대비 시간 정확도가 향상된다. 또한 메시지 발생량이 LTS 대비 50% 감소하고, 기준 신호는 타임스탬프를 사용하지 않기 때문에 CDRS는 LTS에 비하여 시간 동기에 사용되는 에너지가 2.5배 정도 적게 사용된다.

• 한국멀티미디어학회논문지
• /
• 제20권8호
• /
• pp.1330-1337
• /
• 2017

In off-line phase of the preliminary Cut-off indoor positioning scheme, which is one of the indoor positioning scheme using the fingerprint, relative ranks of peak RSSIs received from beacons at each reference point are stored in the fingerprint map. In some reference points, signals of multiple beacons may be received. In this case, the relative ranks may be different when constructing fingerprint and when receiving signals in real-time. To solve this problem, we propose a method to utilize only up to five beacons with high ranking when constructing a fingerprint and when receiving signals in real-time and comparing them with stored information of a fingerprint. Experiments were conducted on the estimation probabilities and the average error when using this method. Those are compared with the previous methods. Experimental results show that the estimation probabilities and the average error are improved by removing only the remaining five beacons at each reference point of the fingerprint.

• 한국소음진동공학회논문집
• /
• 제27권1호
• /
• pp.87-93
• /
• 2017

This paper investigates active noise control of tower-type air conditioners using the filtered-x least mean square (FXLMS) algorithm to reduce fan blower noise transmission. Firstly, the main components required for the active control system including the error sensor, the control speaker and the reference sensors are selected. Since the noise could significantly reduce if the reference signal includes every frequency response information, a various reference signals from accelerometers and a microphone are used. Secondly, the controller based on the FXLMS algorithm with a single-channel reference signal is implemented. Then, the control performance is examined experimentally for the different reference signals. It is found that the accelerometer signal well possesses the motor vibration related noise and a microphone signal could includes global noise. When using the reference signal with a microphone located near the motor and the fan blower, the active control system reduces the noise globally, except for several peaks.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2011년도 추계학술대회
• /
• pp.9-10
• /
• 2011

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.885-886
• /
• 2008

This paper presents a reference template design method for frame-based classification of underwater transient signals. In the proposed method, framebased feature vectors of each reference signal are clustered by using LBG clustering algorithm to reduce the number of feature vectors in each class. Experimental results have shown that drastic reduction of the reference database can be achieved while maintaining the classification performance with LBG clustering algorithm.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권10호
• /
• pp.4814-4834
• /
• 2018

This paper presents an architecture for wireless sensor networks (WSNs) with blind source separation (BSS) applied to retrieve the received mixing signals of the sink nodes first. The little-to-no need of prior knowledge about the source signals of the sink nodes in the BSS method is obviously advantageous for WSNs. The optimization problem of the BSS of multiple independent source signals with complex and noncircular distributions from observed sensor nodes is considered and addressed. This paper applies Castella's reference-based scheme to Novey's negentropy-based algorithms, and then proposes a novel fast fixed-point (FastICA) algorithm, defined as the reference-signal negentropy complex FastICA (RSNT-cFastICA) for complex-valued noncircular-distribution source signals. The proposed method for the sink nodes is substantially more efficient than Novey's quasi-Newton algorithm in terms of computational speed under large numbers of samples, can effectively improve the power consumption effeciency of the sink nodes, and is significantly beneficial for WSNs and wireless communication networks (WCNs). The effectiveness and performance of the proposed method are validated and compared with three related BSS algorithms through theoretical analysis and simulations.

• International Journal of Computer Science & Network Security
• /
• 제24권4호
• /
• pp.206-210
• /
• 2024

Industrial facilities that use modern IT technologies require the ensured reliability and security of information in automated enterprise management. Concurrently, so as to ensure a high quality of communication, it is necessary to expand the bandwidth of communication channels, which are limited by the physical parameters of the radio frequency spectrum. In order to overcome this contradiction, we propose the application of technology fundamental to ultra-wideband signals, in which the ratio between the bandwidth and its central part is greater than "one". For this reason, the information signal is emitted without a carrier frequency - simultaneously within the entire frequency band - provided that the signal level is lower than the noise level. For the transmission of information content, the method of positional-time coding is used, in which each information bit is encoded by hundreds of ultrashort pulses that arrive within a certain sequence. Mathematical models of signals and values observed in wireless communication systems with autocorrelation reception of modulated ultra-wideband signals are furthermore recommended. These assist in identifying features of the dependence of the error probability on the normalized signal-to-noise ratio and the signal base. Comparative analysis has shown that the best noise immunity of the systems considered in this paper is the communication system, which uses the time separation of the reference and information signals. During the first half of the bit interval, the switch closes the output of the transmitter directly to the generator of the ultra-wideband signal - forming a reference signal. In the middle of the bit interval, the switch alternates the output to one of two possible positions depending on the encoding signal - "zero" or "one", forming the information part of the ultra-wideband signal. It should also be noted that systems with autocorrelation reception and separate transmission of reference and information signals, provide a high level of structural signal secrecy. Furthermore, they provide the reliable transmission of digital information, especially in interference conditions.