• Journal of Korean Association for Spatial Structures
• /
• v.18 no.3
• /
• pp.125-132
• /
• 2018

The biggest impact on the cladding design of buildings is wind loads. Wind tunnel tests were conducted to examine the applicability of current wind load standards about membrane retractable roof spatial structure. A dome model with a circular shape that is retractable to the center of the dome was made (Opening ratio = 0, 10, 30, 50). In addition, height adjustable turntables were made and tested with five patterns with H/D = 0.1, 0.2, 0.3, 0.4 and 0.5. The maximum wind pressure coefficient and the minimum wind pressure coefficient for the cladding were analyzed and the experimental wind pressure coefficient were compared with the current wind load standards, KBC2016 and AIJ-RLB(2015). The experimental value and the reference value of the enclosed roof were very similar and showed possibility of application, but opened roof case was found that the reference value was underestimated.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.17 no.4
• /
• pp.159-169
• /
• 2013

The purpose of this study is to investigate the inelastic behavior of hollow reinforced concrete bridge column sections with reinforcement details for material quantity reduction and to provide the details and reference data. Among the numerous parameters, this study concentrates on the shape of the section, the reinforcement details, the diameter of the transverse reinforcement and loading types. Eighteen column section specimens were tested under quasi-static monotonic loading. In this study, the computer program RCAHEST (Reinforced Concrete Analysis in Higher Evaluation System Technology) was used. A modified lateral confining effect model was adopted for the hollow bridge column sections. This study documents the testing of hollow reinforced concrete bridge column sections with reinforcement details for material quantity reduction and presents conclusions based on the experimental and analytical findings.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.162-165
• /
• 2017

The proposed paper extracts the region of interest from the x-lay input image and compares it with the reference image. The x-ray image has the same shape, but the size, direction and position of the object are photographed differently. In this way, we measure the erection difference of darkness and darkness using the similarity measurement method for the same object. Distance measurement also calculates the distance between two points with vector coordinates (x, y, z) of x-lay data. Experimental results show that the proposed method improves the accuracy of ROI extraction and the reference image matching time is more efficient than the conventional method.

• Journal of Korean Society of Forest Science
• /
• v.95 no.5
• /
• pp.595-600
• /
• 2006

The plot design influences the budgets and the precision of forest inventory results. The objective of this study is to determine the efficiency of estimating forest variables such as tree density, basal area, volume, and species richness based on various plot sizes using fixed-area plot sampling in the natural deciduous forest of Pyeong-Chang County, Gang-won Province, Korea. In this study, 108 reference plots were established with a fixed plot size and shape of 0.09 ha ($30m{\times}30m$). In order to determine the optimal plot size for the interest of variables, each sample plot was established using different shapes (square, circle, and rectangle) and was divided into different plot sizes from 100 to $900m^2$. The mean relative difference (MRD) for the sum of the basal area and volume, and tree density per hectare decreased as plot size increased. But the MRD for three variables were only below 13% at the plot size of $500m^2$. Species richness for each reference stand observed ranging from 2 to 15 species, demonstrated highly positive significant relationships with plot size. The minimum plot size for the estimation of tree density, the sum of the BA and volume was determined to be about $400m^2$, whereas the estimation of species richness required a minimum plot size of $500m^2$.

• Journal of Sport and Applied Science
• /
• v.5 no.2
• /
• pp.55-61
• /
• 2021

Purpose: This study aims to obtain basic data for conceptual establishment of sports participation and perceived benefits by considering prior research on the effects of sports participation to derive variables for perceived benefits of sports participants. Research design, data, and methodology: This study used an integrated literature review. A conceptual model is designed with reference to a prior study by adopting a guiding theory. Based on the key words. The literature collection was conducted online, and the reference period for the literature collection was for studies published between 2015 and 2020. Results: First, a total of seven related variables were derived from the literature analysis related to sports participation and physical benefits. Second, a total of six variables were derived from the literature analysis related to sports participation and mental benefits. Third, a total of four related variables were derived through a literature analysis related to sports participation and social benefits. Conclusions: Health fitness, objectified body consciousness, and social body shape anxiety, including body composition, approach physical benefits among perceived benefits through sports participation, and physical self-efficacy and physical self-concepts are related to physical benefits but are also shown to be related to mental benefits. And successful aging is seen to be close to social benefits and related to some mental benefits. Mental and social benefits can be seen as the variables derived from the results being related to the benefits, and more in-depth exploration of perceived benefits is needed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.115-120
• /
• 2017

Moving techniques is made up the physical moving status of the flow distinction modulus (FDM) and stream distinction modulus (SDM) on the shudder moving shape. Condition of the distinction modulus by the shudder moving shape is organized the dangle moving system. As to define the physical moving of special signal on the matter, we compared a shudder value of the flow distinction modulus on the flow state. The concept of stream distinction modulus is analyzed the reference of stream distinction signal and stream distinction signal by the stream state. For detecting a variation of the FDM-SDM of the maximum-minimum and average in terms of the moving shape, and shudder moving value that is a shudder value of the top variation of the $Top-{\varepsilon}$ MAX-MIN-AVG with $(-0.817){\pm}0.15$ units, that is a shudder value of the peripheral variation of the $Per-{\varepsilon}$ MAX-MIN-AVG with $(-2.53){\pm}(-0.11)$ units, that is a shudder value of the limbus variation of the $Lim-{\varepsilon}$ MAX-MIN-AVG with $(-0.29){\pm}0.03$ units, that is a shudder value of the center variation of the $Cen-{\varepsilon}$ MAX-MIN-AVG with $(-0.09){\pm}(-0.01)$ units. The dangle moving will be to assess at the capacity of the physical moving shape for the control degree of distinction modulus on the FDM-SDM that is showed the flow and stream shape by the distinction modulus system. Dangle distinction system is adjusted of a shape by the special moving and is included a shudder data of dangle moving modulus.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.19 no.2
• /
• pp.108-111
• /
• 2015

Purpose Lately, in accordance with the increasing interest about Healthcare accreditation program and International laboratory accreditation scheme, requirements about the instrument quality management are gradually taking shape. In nuclear medicine In vitro laboratory, the most typical instruments are multi detector gamma counter and automatic dispensing system. Each laboratory continue with the quality control adequate for circumstances. The purpose of this study is to application and establish the new Calibrator[I-125]Set which is efficient at standardization of equipment quality management. Materials and Methods Deviation between detectors were measured with 12 solid samples of the Calibrator[I-125]Set. their activities differ from each other by less than 1%. Multi detector gamma counters are GAMMA-10;Shinjin medics. Inc, Goyansi, Korea(Gamma counter A), SR300;Stratec biomedical systems AG, Gewerbestr, Germany(Gamma counter B) and COBRA II; Packard Instrument Co. Inc, Meriden, USA(Gamma counter C). Evaluation of two automatic dispensing system used A, B liquid tracer of the Calibrator[I-125]Set. After dispensing and counting, calculated using the ratio of the measured value and proposed value. We used solution A for 20, 25ul and solution B for 50, 100ul. Method of data analysis and reference range was provided by kit documentation. Furthermore, we could calculate our counter efficiency indirectly. Results The CV(%) of measured values by Gamma counter A, B, C are 0.34, 0.70, 1.30. Calculated value are 1.05314, 2.10419, 4.08485. Provided reference range is less than 3. A dispensing system's calculated values are 0.986, 0.989, 1.023, 1.017 and B are 0.874, 0.725, 1.021, 0.904. Provided reference range is from 0.95 to 1.05. Also, counter's efficiency are 74.18, 72.79, 74.32% at counter A, B, C and efficiency of the one detector counter is 79.26%. Conclusion If using this Calibrator[I-125]Set after verifying whether quality assurance, is applicable to equipment quality management on behalf of the role of gold standard.

• Computational Structural Engineering
• /
• v.9 no.1
• /
• pp.33-45
• /
• 1996

A general stiffener element which includes transverse shear deformation is formulated using the p-version finite element method. Hierarchic C/sup o/-shape functions, derived from Integrals of Legendre polynomials, are used to define the assembled stiffness matrix of the stiffener with respect to the local reference frame is transformed to the plate reference system by applying the appropriate transformation matrices in order to insure compatibility of displacements at the junction of the stiffener and plate. The transformation matrices which account for the orientation and the eccentricity effects of the stiffener with respect to the plate reference axes are used to find local behavior at the junction of the stiffener and the relative contributions of the plate and stiffener to the strength of the composite system. The results obtained by the p-version finite element method are comared with the results in literatures, especially those by the h-version finite element analysis program, MICROFEAP-II.

• The Research Journal of the Costume Culture
• /
• v.13 no.5 s.58
• /
• pp.671-685
• /
• 2005

The purpose of this study was to develop a new size range and size interval for early adolescent girls. For this purpose, a total of 529 girls aged between 10 and 14 were measured and data were collected from 42 anthropometric measurements and 41 photographic measurements per a person. SAS 8.1 was used in data analysis including means, standard deviations, and frequency analysis. The stature was divided at 5cm intervals as in KS into 9 sizes from the lowest 130cm to the highest 171cm. If waist circumference were divided at the same intervals, the sizes cannot reflect the body growth of adolescent girls at these ages. Thus this study set intervals between sizes irregularly based on the mean of waist circumference by the type of body shape. Based on the results, this study proposed: for Type A - 6 sizes (140A-58, 145A-54, 145A-62, 150A-58, 150A-62, 155A-62); for Type X- 9 sizes (150X-59, 155X-63, 155X-66, 160X-59, 160X-63, 160X-66, 165X-59, 165X-63, 165X-66): and for Type H - 7 sizes (145H-68, 150H-68, 150H-70, 155H-68, 155H-73, 160H-68, 160H-73). For the sizes selected for each type, reference measurements were decided - centering on items necessary for manufacturing clothes. Reference measurements suggested for lower garments 8 items including waist circumference, hip circumference, slacks length and crotch length. The suggested sizes are distributed in a wider range, so they are considered to be helpful for students to find clothes fitting their bodies.

• Fashion & Textile Research Journal
• /
• v.15 no.3
• /
• pp.423-429
• /
• 2013

This study helps out-size consumers purchase tops and improve the fitness of unde-weight women in their 20s-30s and by the establishment of a size system. The criteria for subjects in this study were those under 18.5($kg/m^2$) of the BMI; subsequently, a total of 233 females were enrolled. The results were: First, the nominal size for female adult formal dress suggested by the KS standard is suggested in 20 sections. The sections for underweight women are 7, (34 women who accounted for 14.59% out of 233 in total). The cover efficiency was 2.08% (which was very low). Second, tests showed that the average difference between the reference part body size of 7 sections for underweight women in the normal size section of bust cir.- hip cir.- height, and KS standard, waist cir. among reference sizes was rather small in the case of a nominal size for long height. Therefore, there is a significant difference with size in the KS standard and a sizing system proven improper for underweight woman. Third, the basic body sizes and reference body sizes were different due to the size system establishment according to measurements of underweight subjects. The research findings suggest that it is necessary to understand underweight types according to bust girth and hip girth sizes that represent basic sizes as well as to design patterns that consider the underweight body shape characteristics when women's tops are designed.