• Journal of the Korean Chemical Society
• /
• v.44 no.1
• /
• pp.17-23
• /
• 2000

Electrodes of the polycationic film with electropolymerized $[Ru(v-bpy)_3]^{2+}$ having about 1:1 ratio of $PF6^-/ClO_4^-$as the doped counter ions, were modified with xylenol orange and diethylditbiocarbamate by ion exchange which had stability constant as 38.6 and 17.5 respectively. These electrodes were employed in the quantitative multiple determination of U(W) in solution. The working electrode of electrochemical cell for the analytical signal was Pt/p-$[Ru(v-bpy)_3]^{2+}$, ligand, U(VI) with Ag/AgCl reference elecrode. In the stripping voltammetry. electrode process was electron transfer controlled one and calibration curves at the ranges of $1.0{\times}10^{-3}{\sim}1.0{\times}10^{-7}$ M had excellent relationship as 0.99 and relative standard deviation as 5${\sim}$8%.

• International Journal of Highway Engineering
• /
• v.10 no.2
• /
• pp.81-89
• /
• 2008

Shear test procedure for concrete-dowel interaction was proposed along with determination of dowel support reaction factor or shear spring stiffness constant using the spreadsheet example. For this task, three AASHTO-type standard specimens were prepared to simulate behavior of the jointed concrete pavement. A side support system was adopted to minimize twisting of the test specimen which had been observed in a preliminary test. A typical elastic behavior of the dowel-concrete interaction was observed from several test loops of loading, unloading and reloading procedures. However load versus slab displacement represents to be nonlinear. Test results show that the dowel support reaction factor ranges from 550-880 GN/m3, which is 1.4-2.2 times greater than 407GN/m3 proposed by Yoder and Witczak. This is because less torsional distraction was occurred with the help of a side support system adopted in this experiment. The dowel support reaction factor or shear spring stiffness constant obtained from the procedures proposed in this paper may be used as a reference data for the structural analysis of jointed concrete pavement.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.spc1
• /
• pp.42-46
• /
• 2006

The purpose of this study was to assess whether mechanical sensory score by Toyo Midometer can be substituted by near-infrared spectroscopy (NIRS) method in whole-grain milled rice samples. Toyo values of collected commercial brand rice (n=127) had comparatively wide ranges from 62.9 to 84.2 (Mean=70.5; S.D.=4.0). Calibration equation was developed using 73 samples. Standard error of calibration (SEC) for sensory score equation and $R^2$ were 0.95, and 0.94, respectively, however, percentage of variation in the reference method values (1-VR) which give a true indication of equation performance was slightly lower (1-VR=0.81) than calibration equation. It was demonstrated that, even though NIRS has potential as a rapid tools to predict rice sensory score, the prediction of sensory score in rice by NIRS needs to be further investigation on a large number of sample with different varieties and growing locations.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.8
• /
• pp.1306-1314
• /
• 2009

This study investigates the progress of obesity in men from childhood to adulthood, by analyzing the measurement references from the 5th Size Korea. It also seeks to analyze the characteristics of obese figures through the comparison of body proportions to normal-weight people, to provide a basic reference for the development of new size categories and improved pattern grading. The age range is divided into three groups: children (2-7), teenagers (13-18), and adults (19-39). The results of research into the characteristics of body proportions of obese figures and the classification of different figure groups of obese people are as follows. The ratio between width and circumference for each part of the body was investigated according to body weight that was grouped into three different categories of low, normal, and obese body weights. The result demonstrated that in all the ranges of age, the obese groups had the lowest ratio between width and circumference in having a thick body shape. According to the results that compared the ratio of the circumference of each body part divided by the waist circumference, the obese group showed a low ratio that indicates that they have a bigger waist circumference than other parts of the body. Two factors are identified as contributing to obesity in analyzing the ratio of the circumference of body parts divided by waist circumference. Using the factor loadings of the upper and lower body obesity, a cluster analysis was carried out and three different categories of obesity were defined; lower body obesity, abdominal obesity, and upper body obesity. The obese groups of children and teenagers were mostly in body shape with lower obesity and abdominal obesity, whereas the adults group showed the obesity present in the upper body obesity that have fewer cases in lower body obesity.

• Journal of the Korean Society for Library and Information Science
• /
• v.40 no.2
• /
• pp.125-150
• /
• 2006

Yeogkwa Bo is a biographical source that was re-edited based on the primary sources such as Yeogkwa Bangmok which is the list of the successful applicants in Yeogkwa. 7 Kinds of the existing Yeogkwa Bo was studied and analyzed in bibliographical way. This study proves that the period of available record(of successful applicants' names) ranges from 1807 to 1891, although it has been mentioned before that the period of record covers as far as 1882. As a result of comparison of mentioned family names, family origins, total number of the successful applicants in Yeogkwa, and content of record, Yeog Bo of Dangrih University's shows the most extensive and substantial work, and Yeogkwa Bo of Jangseo Kag's is quite superior to other archives present at home. But both of them show problems such as errors or omission of some records, confusion in spelling and so on. Therefore, the above study implies that there should be process of checking through study of Yeogkwa Bangmok when making reference to Yeogkwa Bo which provides biographical information on family trees and origins as well as information on the individual successful applicants in Yeogkwa.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1836-1840
• /
• 2005

This work proposes a controller tuning method of a Hyundai 8608 robot in order to improve its performance. For this, we analyzed the control structure of the robot, and the functions of all the adjustable parameters in the robot controller with a reference 'NACHI Technical Report'. Through the analysis, we found out that 3 important parameters(VRRL, VRF, VRGIN) act like a conventional PID gains and other parameters are closely related to these 3 parameters. Conclusively, parameter tuning of these 3 parameters is enough in most cases of applications with other parameters fixed. The conventional PID tuning is performed to each joint of the test robot with Robot Performance Evaluation System(shown in our companion paper) so that the acceptable gain ranges for each joint are determined and then the robot performance tests are repeatedly done with the combination of the acceptable gains. Finally, the best combination is selected for its best performance. For the effectiveness of the proposed method, it was implemented on a Hyundai 8608 robot and its results are compared with the results of NACHI's Semi-Auto Tuning Method and the results which are done by a tuning expert with his eyes.

• Journal of Microbiology
• /
• v.40 no.4
• /
• pp.335-339
• /
• 2002

Partial sequences of 16S rRNA gene of five chroococcalian blue-green algal strains, Aphanothece nidulans KCTC AG10041, Aphanothece naegelii KCTC AG10042, Microcystis aeruginosa KCTC AG10159, Microcystis ichthyoblabe KCTC AG10160, and Microcystis viridis KCTC AG10198, which were isolated from water from the Geumgang River, were determined and were inferred their phylogenetic and taxonomic positions among taxa of order Chroococcales. Most taxa of Chroococcales whose partial 16S rRNA gene sequences were aligned in this study, are clustered with other related taxa. Aphanothece nidulans KCTC AG10041 and Aphanothece naegelii KCTC AG10042 made a cluster with other European species of these genera, which supported 100% of the bootstrap trees with a very high sequence similarity (97.4-99.4%) in this study. Three strains, Microcystis aeruginosa KCTC AG10159, M. ichthyoblabe KCTC AG10160, and M. viridis KCTC AG10198, formed a cluster with other Microcystis spp. supported 100 % of the bootstrap trees with a similarity of 97.0-99.9% except for two strains. However, this phylogentic tree made no resolution among the species of Microcystis spp. The topology of the tree reconfirmed the taxonomic status of three species of Microcystis, identified in this study based on the morphology, as three colonial types of Microcystis aeruginosa com. nov. Otsuka et al. (1999c). The genera of chroococcalian cyanophytes are heterogeneously clustered in these sequence analyses. We suggest that more molecular studies on the genera of Chroococcales with reference strains, widely collected from restricted geographic or environmental ranges, get accurate taxonomic or phylogenetic determinations.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.2
• /
• pp.107-114
• /
• 2014

This paper proposes a common rail pressure control algorithm for passenger car diesel engines. For handling the parameter-varying characteristics of common rail systems, the quantitative feedback theory (QFT) is applied to the design of a robust rail pressure control algorithm. The driving current of the pressure control valve and the common rail pressure are used as the input/output variables for the common rail system model. The model parameter uncertainty ranges are identified through experiments. Rail pressure controller requirements in terms of tracking performance, robust stability, and disturbance rejection are defined on a Nichols chart, and these requirements are fulfilled by designing a compensator and a prefilter in the QFT framework. The proposed common rail pressure control algorithm is validated through engine experiments. The experimental results show that the proposed rail pressure controller has a good degree of consistency under various operating conditions, and it successfully satisfies the requirements for reference tracking and disturbance rejection.

• Journal of Food Hygiene and Safety
• /
• v.23 no.1
• /
• pp.19-25
• /
• 2008

We analyze the HACCP Prerequisites of National Veterinary Research and Quarantine Service (NVRQS), Korea Food and Drug Administration(KFDA), and US Food Safety and Inspection Service (FSIS) and recommend contents and ranges to be complemented and used for the preparation of guidelines. We used the HACCP Notice of the Processing Livestock Act, the HACCP Application Manual for Livestock Processing Plants, the HACCP Notice of the Food Sanitation Act, US GPO 9 CFR and 21 CFR, US FSIS Directive 11,000.1, and HACCP-based Inspection reference guide of Consumer Services, North Carolina Department of Agriculture. The Prerequisites of NVRQS and KFDA are composed of 66 and 84 items respectively, without detailed guidelines for their application. This may decisively affect the application in the field and the evaluation activities. Water supplies, washing and disinfection monitoring tools, and examining and correcting plan are required to be improved. If the standards of compliance of each Prerequisite item as well as performance guidelines are given, the application and evaluation will be performed more effectively. The evaluation items should be associated with Prerequisite operations such as non-compliance complement, self-evaluation, and record keeping. Hazards found during official inspection should be promptly controlled not to contaminate the work places and processing items. As the HACCP is expected to spread from farms to tables, the standardized Prerequisite program among the official governments should be prepared.

• Journal of Nutrition and Health
• /
• v.42 no.4
• /
• pp.318-326
• /
• 2009

We evaluated the vitamin A and E status of type 2 diabetic patients and normal adults living in Daegu area. Dietary intakes for two non-consecutive days were measured by 24-hour recall method for 76 diabetic patients and 72 normal adults. Plasma levels of retinol and ${\alpha}$-tocopherol were measured using HPLC method. Dietary intakes of vitamin A were not significantly different between the diabetic and the normal adults. However, the diabetic patients had significantly lower vitamin E intakes than the normal adults. Major food sources for vitamin A intake were red pepper powder and carrot. Half of the subjects from diabetic as well as normal adults consumed less than estimated average requirement of vitamin A. Plasma levels of retinol and tocopherol were maintained within normal ranges for most of the subjects regardless of diabetic status. Dietary intake of vitamin A was associated with vitamin E intake, however, there was no significant correlations between vitamin E intake and plasma ${\alpha}$-tocopherol levels. It seems that diabetic patients should try to increase dietary intake of vitamin E, as prolonged lower-level intake of vitamin E could eventually lead to vitamin E depletion. Further studies are needed to identify the magnitude of dietary variance at individual and seasonal levels, and to understand the discrepancies in dietary intake and plasma levels before establishing the dietary reference intake based on Korean dietary pattern.