• Bulletin of the Korean Chemical Society
• /
• v.26 no.3
• /
• pp.440-446
• /
• 2005

A method is described for the determination of dibutyltin (DBT) in sediment by isotope dilution using liquid chromatography inductively-coupled plasma/mass spectrometry (LC-ICP/MS). To achieve the highest accuracy and precision, special attentions are paid in optimization and evaluation of overall processes of the analysis including extraction of analytes, characterization of the standards used for calibration and LC-ICP/MS conditions. An approach for characterization of natural abundance DBT standard has been developed by combining inductively-coupled plasma/optical emission spectrometry (ICP/OES) and LC-ICP/MS for the total Sn assay and the analysis of Sn species present as impurities, respectively. An excellent LC condition for separation of organotin species was found, which is suitable for simultaneous DBT and tributyltin (TBT) analysis as well as impurity analysis of DBT standards. Microwave extraction condition was also optimized for high efficiency while preventing species transformation. The present method determines the amount contents of DBT in sediments with expanded uncertainty of less than 5% and its result shows high degree of equivalence with reference values of an international inter-comparison and a certified reference material (CRM) within stated uncertainties.

• Imaging Science in Dentistry
• /
• v.41 no.2
• /
• pp.53-57
• /
• 2011

Purpose : The purpose of this study was to evaluate the diagnostic performance of dental students in detection of mandibular condyle fractures and the effectiveness of reference panoramic images. Materials and Methods : Forty-six undergraduates evaluated 25 panoramic radiographs for condylar fractures and the data were analyzed through receiver operating characteristic (ROC) analysis. After a month, they were divided into two homogeneous groups based on the first results and re-evaluated the images with (group A) or without (group B) reference images. Eight reference images included indications showing either typical condylar fractures or anatomic structures which could be confused with fractures. Paired t-test was used for statistical analysis of the difference between the first and the second evaluations for each group, and student�fs t-test was used between the two groups in the second evaluation. The intra- and inter-observer agreements were evaluated with Kappa statistics. Results : Intra- and inter-observer agreements were substantial (k=0.66) and moderate (k=0.53), respectively. The area under the ROC curve (Az) in the first evaluation was 0.802. In the second evaluation, it was increased to 0.823 for group A and 0.814 for group B. The difference between the first and second evaluations for group A was statistically significant (p<0.05), however there was no statistically significant difference between the two groups in the second evaluation. Conclusion : Providing reference images to less experienced clinicians would be a good way to improve the diagnostic ability in detecting condylar fracture.

• Journal of the Korean Society for information Management
• /
• v.17 no.4
• /
• pp.171-186
• /
• 2000

The slody examined whethcr academe libraries deliver web~hased electronic relerencc services lo remole users. Amo~~g 178 acadclnlc lihraies. only 25.5% prolide reference services of inlroducing eleclronic reference materials and 20.8% o f h electron~c rdel-coce mquq rcwices. However, the use oi electronic access to reference inquuy was weak. One acarlcmic llbrarr reccived on avn-agc 3.2 queslions pcr monlh ovw elecmnic reference inquiries Irom remo~e users. Among the 1,128 questions i-cccived eleclroo~ci~lly, oldy 19.8% were reyardcd as real rekrencc queslmns.

• The Journal of Advanced Prosthodontics
• /
• v.14 no.2
• /
• pp.63-69
• /
• 2022

PURPOSE. The aim of this in vitro study was to investigate the accuracy (trueness and precision) of five intraoral scanners (IOS) using a novel reference model for standardized performance evaluation. MATERIALS AND METHODS. Five IOSs (Medit i500, Omnicam, Primescan, Trios 3, Trios 4) were used to digitize the reference model, which represented a simplified full-arch situation with four abutment teeth. Each IOS was used five times by an experienced operator, resulting in 25 STL (Standard Tessellation Language) files. STL data were imported into 3D software (Final Surface^®) and examined for inter- and intra-group analyses. Deviations in the parameter matching error were calculated. ANOVA F-test and Kruskal-Wallis test were applied for inter-group comparisons (α = .05); and the coefficient of variation (CV) was calculated for intra-group comparisons (in % ± SD). RESULTS. Primescan (matching error value: 0.015), Trios 3 (0.016), and Trios 4 (0.018) revealed comparable results with significantly higher accuracy compared to Medit i500 (0.035) and Omnicam (0.028) (P < .001). For intra-group comparison, Trios 4 demonstrated the most homogenous results (CV 15.8%). CONCLUSION. The novel reference model investigated in this study can be used to assess the performance of dental scanning technologies in the daily routine setting and in research settings.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1766-1771
• /
• 2007

This paper presents plastic limit loads and approximate J-integral estimates for circumferential part-through surface crack at the interface between elbows and pipes. Based on finite element limit analyses using elastic-perfectly plastic materials, plastic limit moments under in-plane bending are obtained and it is found that they are similar those for circumferential part-through surface cracks in the center of elbow. Based on present FE results, closed-form limit load solutions are proposed. Welds are not explicitly considered and all materials are assumed to be homogeneous. And the method to estimate the elastic-plastic J-integral for circumferential part-through surface cracks at the interface between elbows and straight pipes is proposed based on the reference stress approach, which was compared with corresponding solutions for straight pipes.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.153-158
• /
• 2000

Nuclear reactor pressure vessel should be safety even in the case that hypothetical defects with allowable size are in vessel. Therefore, the materials should have excellent fracture resistance characteristics. The purpose of this study is to analyze the results of preirradiation baseline test of nuclear pressure vessel for Yonggwang Unit 5/6. In experiments, drop weight tests and impact tests are carried out to obtain nil-ductility transition reference temperature, $RT_{NDT}$ and static and dynamic fracture toughness tests are performed to compare with $K_{IR}$ curve in accordance with ASME Sec.III. The test results show that the materials had sufficiently fracture resistance characteristics for 40 years of design life.

• Imaging Science in Dentistry
• /
• v.35 no.1
• /
• pp.25-31
• /
• 2005

Purpose : To evaluate the stability of the segmental occlusal plane and anatomical line as the reference line for measuring the mesiodistal tooth angulation in panoramic radiography and to determine the mean angle and the range of the mesiodistal tooth angulation in Korean population with normal occlusions. Materials and Methods : Twenty nine subjects (15 men, 14 women) with normal occlusion were selected. A total of 29 panoramic radiograms were taken at normal head position and then 10 images of 5 subjects selected were repeatedly taken with repositioning 2 times at each of the head down (V-shaped occlusion) and up (horizontal occlusion) for evaluation of stability of adopted reference lines by using PM2002CC (Planmeca, Finland). The images were traced with adoption of two test reference lines and the long axes of the teeth. The mesial angles formed by each reference line and the long axes of the teeth were measured and analyzed. Results : With anatomical reference line, the mesiodistal tooth angulations of the molars showed the significant difference by over 5 degree between the normal and each changed head position. With segmented occlusal reference line, deviations of mesiodistal tooth angulations by the two changed head positions were less than 1 degree. The means, standard deviations, and maximum and minimum values of mesiodistal tooth angulations to segmental occlusal reference line on panoramic radiography were determined. Conclusion : It would appear that mesiodistal tooth angulations to segmental occlusal plane as reference line in panograms are predictable as standards of normal occlusion and useful for evaluation of tooth arrangement between adjacent teeth.

• Journal of Korean Library and Information Science Society
• /
• v.28
• /
• pp.93-135
• /
• 1998

The purpose of this study was to compare the effectiveness of programmed instruction versus lecture and discussion method on the knowledge of basic reference sources among undergraduate library and information science students. The hypotheses of the study were: 1. Programmed instruction will be more effective than the lecture/discussion method with regard to academic achievement. 2. There will be a significant difference in learning time between the experimental and the control groups. Seventy-eight library and information science students were participated m the study from the two universities in Chungchong Province. A programmed instruction manual, including 4-types of reference sources-dictionary, encyclopaedia, bibliography, indexes and abstracts, 40-item multiple choice post-test, and a questionnaire for the students' attitude toward programmed instruction were developed specifically for this research. The post-test only control-group design was selected for this experimental study. Students were given instruction on the specific reference titles in dictionary, encyclopedia, bibliography, indexes and abstracts. The control group was instructed by the lecture and discussion method while the experimental group completed a programmed instruction manual by themselves. Both the control and the experimental group were tested right after the instruction of 4-types of reference sources. In addition, a questionnaire asking students' attitude toward programmed instruction was administered to the experimental group. The findings from this study are summarized as follows: 1. The results showed that there were no significant difference in the mean of the post test score between the two groups. Therefore, programmed instruction is viable as an alternative method of instruction in the teaching of reference sources. 2. There was a significant difference in the mean of time spending for the leaning of bibliography, indexes and abstracts between the two groups. Accordingly, programmed instruction proved to be more efficient than the conventional lecture/discussion method in terms of learning time. 3. Students showed positive response to programmed instruction and evaluated it very interesting and challenging. In conclusion, the programmed instruction method was just as effective as the lecture/discussion method in the teaching of reference sources. And students' attitude toward the programmed instruction was favorable enough to secure a continued use of this method for the teaching of reference sources.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.1
• /
• pp.97-100
• /
• 1992

Locally available milk mix, coconut meal, cassava root meal, cassava leaf meal, maize, meat meal, fish meal, rice bran, rice polishings, wallow, molasses and coral sand in Fiji were analysed for proximate components, gross energy and mineral contents. The results obtained indicated typical and variable amounts of nutrients in these materials. On the basis of their nutrient contents, the potential usefulness and weaknesses of the various feed materials are discussed with specific reference to the formulations of diets for livestock and poultry in Fiji based on these locally available feed materials.

• Transactions of Materials Processing
• /
• v.5 no.4
• /
• pp.337-342
• /
• 1996

The present investigation is concerned with application of theory on fracture to the prediction of workability of materials in rotary forging with special reference to center crack. The validity of the theory on ductile fracture was examined by the experimental data. Then the workability of materials in rotary forging was determined.