• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.187-189
• /
• 2007

In this paper, the cascade 3-phase IHMCL inverter using two low frequency transformers is proposed. The proposed inverter is constructed by connecting a 3-phase IHCML inverter. the cascade 3-phase IHCML inverter has several advantages. One advantage is that only one input power source is required because of using transformers to isolate. Another advantage is that the switching frequency of the high power switches is almost fundamental frequency of reference and the other the switching frequency of the low power switches is higher. It can be known that cascade 3 phase IHCML inverter has the excellent efficiency and the outstanding electric quality. lastly, we tested the 5kW cascade 3-phase IHCML inverter to clarify the proposed electric circuit and reasonableness of control signal for the proposed inverter.

• Journal of Integrative Natural Science
• /
• v.12 no.3
• /
• pp.78-84
• /
• 2019

In many cases, the quality of a product is determined by several correlated quality variables. Control charts have been used for a long time widely to control the production process and to quickly detect the assignable causes that may produce any deterioration in the quality of a product. Numerical switching performances of multivariate cumulative sum control chart for simultaneous monitoring all components in the dispersion matrix ${\Sigma}$ under multivariate normal process $N_p({\underline{\mu}},{\Sigma})$ are considered. Numerical performances were evaluated for various shifts of the values of variances and/or correlation coefficients in ${\Sigma}$. Our computational results show that if one wants to quick detect the small shifts in a process, CUSUM control chart with small reference value k is more efficient than large k in terms of average run length (ARL), average time to signal (ATS), average number of switches (ANSW).

• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.557-560
• /
• 2004

In this study, we design the one-chip PWM IC for SMPS (Switching Mode Power Supply) application. We determine the IC spec. and simulated each block of PWM IC (Reference, Error amp., Comparator, Oscillator) with Smart Spice (SILVACO Circuit Simulation Tool). Reference circuits generate constant voltage(5V) in the various of power supply and temperature condition. Error amp. is designed with large DC gain (${\simeq}65dB$), unity frequency (${\simeq}190kHz$) and large PM($75^{\circ}$).Saw tooth generators operate with 20K oscillation frequency (external resistor, capacitor).

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.409-412
• /
• 2002

The delta modulation used for controlling the speed of an induction motor has high peak of harmonic spectrum at low speed range causing acoustic noises in the induction motor. This paper proposes to suppress the harmonics by synchronizing the reference signal with the hysteresis windows for controlling the distribution of the switching frequency. As a result we can decrease the peak of harmonic spectrum. The simulation results show that the peak spectrum of harmonics can be reduced up to 60%.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.359-360
• /
• 2016

This paper presents a new predictive current control (PCC) method to achieve the coordinate control of power and current of the matrix converter under unbalanced input voltages. In order to control the power fluctuation in the input side, the flexible source current reference is generated based on the positive-negative sequence components of the input voltage. The optimal switching state to adjust source and load currents is selected by minimization the cost function which is obtained from the sum of the absolute errors between the current references and their predictive values. Simulation results are given to validate the effectiveness of the proposed PCC method.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.69-71
• /
• 2003

Switched reluctance machine has much attention because of high efficiency, high power and DC series torque characteristics with a traction drive. But the motor has to have a regenerative mode when it is adopted in an electric vehicle. A current divergence during the regeneration makes difficulties in the control of SRM. This paper proposes a reference current limitation strategy for a stable regeneration based on simulations and experimental tests. The motor is operated with conventional current limit and switching angle control method in motoring mode. Simulations and experiments are executed to verify proposed method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.2
• /
• pp.264-268
• /
• 2009

In this paper, the two PCB design method results of boost converters are simulated with same circuit device parameters. One is modeled with microstrip structure and the other is modeled two layers structure without reference plane. Between devices of each circuit are routed 5 centimeters. When the switching frequency is operated 100kHz, the overshoot by signal reflection and the noise characteristics by frequency spectrum for the output voltage and current of the power switch is compared and analyzed using simulation.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.56 no.3
• /
• pp.136-141
• /
• 2007

In this paper, a new simple control method for active power filter which can realized the complete compensation of the harmonic currents is proposed. In the proposed scheme, a compensating current reference generator employing resonance model implemented by a DSP(Digital Signal Processor) is introduced. Deadbeat control is employed to control the active power filter. The switching pulse width based SVM(Space Vector Modulation) is adopted so that the current of active power filter is been exactly equal to its reference at the next sampling instant. To compensate the computation delay of digital controller, the prediction of current is achieved by the current observer with deadbeat response.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.350-353
• /
• 1999

In this paper, a new simple control method for active power filter which can realized the complete compensation of the harmonic currents is proposed. In the proposed scheme, a compensating current reference generator employing lossless resonato implemented by a DSP(Digital Signal Processor) is introduced. Deadbeat control is employed to contro the active power filter. The switching pulse width based SVM(Space Vector Modulation) is adopted so that the current of active power filter is been exactly equal to its reference at the next sampling instant. To compensate the computation delay of digital controller, the prediction of current is achieved by the current observer with deadbeat response.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.1
• /
• pp.23-30
• /
• 2016

We report a STT-MRAM write-scheme, in which the length of the write-pulse is determined dynamically by sensing the status of MTJ cells. The proposed scheme can reduce the power consumption by eliminating unnecessary writing current after the switching has occurred. We also propose a reference cell design, which is optimized for the use in write-circuits. The performance of the proposed circuit was verified by SPICE level simulations of the circuit implemented in a $0.13{\mu}m$ CMOS process.