• 한국자동차공학회논문집
• /
• 제6권1호
• /
• pp.36-42
• /
• 1998

In this study, active muffler was designed and was manufactured for exhaust noise reduction of commercial vehicle, then experiment of real vehicle was conducted. In a manufactured active muffler, because the flow of exhaust noise in tail pope outlet are become a plane wave, the global reduction if radiation noise from outlet and the placement of error microphone to avoid the exhaust gas of high temperature could be implemented. In control algorithm, reduction of noise of engine driving frequency and harmonic frequency can be archieved using proposed reference signal including a fixed speed state(2,000rpm, 3,000rpm, 4,000rpm) and a run-up speed state(2,000rpm$\rightarrow$4,000rpm) is accomplished with the active muffler installed in vehicle.

• 한국통신학회논문지
• /
• 제21권3호
• /
• pp.612-621
• /
• 1996

In this paper, we propose the low sidelobe digital FIR doppler filter bank synthesis algorithm through the Gradient Descent method and it can be practially appliable to coherent pulse doppler radar signal processing. This algorithm shows the appropriate calculation of tap coefficients or zeros for FIR transversal fiter which has been employed in radar signal processor. The span of the filters in the filter bank be selected at the desired position the designer want to locate, and the lower sidelobe level that has equal ripple property is achieved than one for which the conventional weithtedwindow is used. Especially, when we implemented filter zeros as design parameters it is possible to make null filter gain at zero frequency intensionally that would be very efficient for the eliminatio of ground clutter. For the example of 10 tap filter synthesis, when filter coefficients or zeros are selected as design parameters the corresponding sidelobelevel is reducedto -70db or -100db respectively and it has good convergent characteristics to the desired sidelobe reference value. The accuracy ofapproach to the reference value and the speed of convergence that show the performance measure of this algorithm are tuned out with some superiority and the fact that the bandwidth of filter appears small with respect to one which is made by conventional weighted window method is convinced. Since the filter which is synthesized by this algorithm can remove the clutter without loss of target signal it strongly contributes performance improvement with which detection capability would be concerned.

• 한국콘텐츠학회논문지
• /
• 제14권12호
• /
• pp.555-564
• /
• 2014

DIBR(Depth Image Based Rendering)을 이용한 영상 합성 시에 발생하는 경계 잡음은 원래 전경 영역에 속하던 화소가 배경으로 흩어져 나와 생성된 잡음이며, 이는 주로 참조 영상과 깊이지도 간 경계 불일치나 참조 영상에서의 블러링 때문에 발생된다. 영상 합성 과정에서 발생된 홀 영역은 일반적으로 주위 화소를 이용하여 채워지게 되므로, 홀에 인접한 경계 잡음은 합성 영상의 화질을 저하시키는 주요 원인으로 작용한다. 이 문제를 해결하기 위해 본 논문은 깊이지도의 전처리를 이용한 새로운 경계 잡음 제거 알고리즘을 제안한다. 기존의 전처리 기법들은 경계 불일치에 따른 경계 잡음의 제거를 위해 참조 영상과 깊이지도의 경계가 일치되도록 깊이지도를 수정한다. 그러나 대부분의 기존 기법들이 신호 기울기 기반의 단순 경계 탐색 알고리즘에 기반을 두고 있어 블러링이 존재하는 경계에서는 탐색 성능의 저하가 나타난다. 제안 알고리즘은 이의 해결을 위해 2단계 경계 탐색을 이용함으로써 이행 영역과 배경 영역 간 경계를 보다 효과적으로 탐색할 수 있는 구조를 제안하였다. 실험 결과를 통해 제안 알고리즘이 기존 알고리즘에 비해 우수한 경계 잡음 제거 성능을 가짐을 보인다.

• 전기학회논문지
• /
• 제67권12호
• /
• pp.1690-1698
• /
• 2018

Recent advances in ICT technology have transformed many of our daily lives and attracted a lot of attention to personal health. Heart beat measurement that reflects cardiac activities has been used in various fields such as exercise evaluation and psychological state evaluation for a long time, but its utilization method is limited due to its differentiation from clinical electrocardiogram. Therefore, in this study, we could observe the change of the measured signal according to the change of the distance and the position of the measuring electrodes which are non-standard electrode configuration. Based on the electric dipole model of the heart, correlation with clinical electrocardiogram could be confirmed by synthesizing multiple surface potentials measured with a shorter electrode distance than standard one. From the electromagnetic point of view, the distance between the measuring electrodes corresponds to the distance that the electric potential by the cardiac electric dipole moves, and the electric potential measured at the body surface is proportional to the moving distance of the electric potential. Therefore, it is preferable to make the distance between electrodes as long as possible, and to position the measuring electrode close to the ventricle rather than the atrium. In addition, it was found that standard electrocardiographic waveforms could be synthesized by using arithmetic sum of multiple measuring electrodes due to the relationship of electrical dipole vectors, which is obtained by dividing and positioning a plurality of measuring electrodes on a reference electrode line, such as Lead-I, Lead-II direction. Also, we obtained a significant Pearson correlation coefficient ($r=0.9113{\pm}0.0169$) as a result of synthetic experiments on four subjects.