• Imaging Science in Dentistry
• /
• 제44권3호
• /
• pp.207-212
• /
• 2014

Purpose: This study aimed to investigate the deviation of landmarks from horizontal or midsagittal reference planes according to the methods of establishing reference planes. Materials and Methods: Computed tomography (CT) scans of 18 patients who received orthodontic and orthognathic surgical treatment were reviewed. Each CT scan was reconstructed by three methods for establishing three orthogonal reference planes (namely, the horizontal, midsagittal, and coronal reference planes). The horizontal (bilateral porions and bilateral orbitales) and midsagittal (crista galli, nasion, prechiasmatic point, opisthion, and anterior nasal spine) landmarks were identified on each CT scan. Vertical deviation of the horizontal landmarks and horizontal deviation of the midsagittal landmarks were measured. Results: The porion and orbitale, which were not involved in establishing the horizontal reference plane, were found to deviate vertically from the horizontal reference plane in the three methods. The midsagittal landmarks, which were not used for the midsagittal reference plane, deviated horizontally from the midsagittal reference plane in the three methods. Conclusion: In a three-dimensional facial analysis, the vertical and horizontal deviations of the landmarks from the horizontal and midsagittal reference planes could vary depending on the methods of establishing reference planes.

• 한국정보통신학회논문지
• /
• 제13권11호
• /
• pp.2335-2340
• /
• 2009

본 논문은 레퍼런스(reference) 데이터 그룹을 효율적으로 생성하고 활용한 마커리스 증강현실(Markerless Augmented Reality)의 구현 방법을 제안한다. 카메라 설정과 레퍼런스 데이터 그룹 생성, 트래킹 (tracking) 부분으로 되어 있다. 효율적인 레퍼런스 데이터 그룹을 생성하기 위해서는 CAD모델과 같은 3D모델을 필요하며, 다양한 관점에서 본 레퍼런스 데이터 그룹을 생성해야 한다. 모델에 대한 영상에서 특징점들을 추출하고, 광선 추적법을 이용하여 그 특징점에 대응하는 3D좌표를 추출하여, 모델의 특징점들에 대한 2D/3D 대응접의 레퍼런스 데이터 그룹이 구성된다. 트래킹 할 때 현재 프레임영상에서 특징점 들이 가장 많이 매칭되는 레퍼런스 데이터와 그 주위의 모델 데이터만을 이용하기 때문에 빠르게 트래킹할 수 있다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 추계학술대회
• /
• pp.204-207
• /
• 2009

본 논문은 마커리스 증강현실(Markerless Augmented Reality)의 구현과 레퍼런스(reference) 데이터 그룹을 효율적으로 생성하고 활용하는 방법을 제안한다. 구현은 카메라 설정과 레퍼런스 데이터 그룹 생성, 트래킹(tracking) 부분으로 되어 있다. 효율적인 레퍼런스 데이터 그룹을 생성하기 위해서는 CAD모델과 같은 3D모델을 필요하며, 다양한 관점에서 본 레퍼런스 데이터 그룹을 생성해야 한다. 모델에 대한 영상에서 특징점들을 추출하고, 광선 추적법을 이용하여 그 특징점에 대응하는 3D좌표를 추출하여, 모델의 특징점 들에 대한 2D/3D 대응점의 레퍼런스 데이터 그룹이 구성된다. 트래킹 할 때 현재 프레임영상에서 특징점 들이 가장 많이 매칭되는 레퍼런스 데이터와 그 주위의 모델 데이터만을 이용하기 때문에 빠르게 트래킹 할 수 있다.

• Journal of Positioning, Navigation, and Timing
• /
• 제1권1호
• /
• pp.45-49
• /
• 2012

The flight performance evaluation of navigation system is very significant because the reliability of navigation data directly affect the safety of aircraft. Especially, the high-level navigation system such as DGPS/INS, need more precise flight performance evaluation method. The performance analysis is evaluated by comparing between the navigation system in aircraft and reference trajectory which is more precise than navigation system in aircraft. In order to verify DGPS/INS performance of m-level, the GPS receiver, which is capable post-processed Carrier-phase Differential GPS(CDGPS) method of cm-level, have to be used as reference system. The DGPS/INS is estimated the Center of Gravity (CG) point of aircraft to offer precise performance while the reference system is output the position of GPS antenna which is mounted on the outside of aircraft. Therefore, in order to more precise performance evaluation, it needs to compensate the lever arm and coordinates transformation. This paper use quaternion and Direct Cosine Matrix(DCM) methods as coordinate transformation matrix in lever arm compensation of CDGPS reference trajectory. And it compares NED errors of DCM and quaternion transformation in lever arm of reference trajectory via DGPS/INS result.

• 한국의류학회지
• /
• 제15권1호
• /
• pp.3-14
• /
• 1991

This thesis investigates influential attributes in clothing purchase through the examination of questionnaire concerning consumer satisfaction at the point of purchase, and clarifies the relationship between consumer satisfaction at the point of purchase and that in wearing. The results are as follows; 1. At interest stage, color, beauty, becomingness and suitability to occasion are influential (in this order): at trial stage, becomingess, color, others' reaction and fit: at adaption stage, color, becomingness, beauty, fit. 2. According to canonical analysis, consumer satisfaction at the point of purchase and that in wearing are closely related. (RCI = .97) It suggests that satisfaction in wearing depends largely on satisfaction at the point of purchase. 3. General satisfaction in wearing is closely related with such factors as predictive expecta-tion, satisfaction at the point of purchase, predictive disconfirmation, normative disconfirrna-tion, and product performance. According to repression results, those factors can explain $79\%$ of satisfaction ill wearing (R = .79). Above all, product performance and normative disconfirmation are highly influential.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.177-178
• /
• 2015

This paper presents a neutral point deviation compensating control algorithm applied to a 3-level NPC converter. The neutral point deviation is analyzed with a focus on the current flowing out of or into the neutral point of the dc link. Based on the zero sequence components of the reference voltages, this paper analyzes the neutral point deviation and balancing control for 3-level NPC converter. An analytical method is proposed to calculate the injected zero sequence voltage for NP balancing based on average neutral current. This paper also proposes a control scheme compensating for the neutral point deviation under generalized unbalanced grid operating conditions. The positive and negative sequence components of the pole voltages and ac input currents are employed to accurately explain the behavior of 3-level NPC converter. Simulation and experimental results for a test set up of 30kW are shown to verify the validity of the proposed algorithm.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송∙미디어공학회 2022년도 하계학술대회
• /
• pp.825-828
• /
• 2022

In this paper, we propose an efficient image size selection method for video-based point cloud compression. The current MPEG video-based point cloud compression reference encoding process configures a threshold on the size of images while converting point cloud data into images. Because the converted image is compressed and restored by the legacy video codec, the size of the image is one of the main components in influencing the compression efficiency. If the image size can be made smaller than the image size determined by the threshold, compression efficiency can be improved. Here, we studied how to improve the compression efficiency by selecting the best-fit image size generated during video-based point cloud compression. Experimental results show that the proposed method can reduce the encoding time by 6 percent without loss of coding performance compared to the test model 15.0 version of video-based point cloud encoder.

• 한국소음진동공학회논문집
• /
• 제20권1호
• /
• pp.83-91
• /
• 2010

In this paper, the feasibility of the cost function having two control factors were discussed in compared to two others which has one different control factor respectively. As of the control factors, the dynamic response of a discrete system and the vibrational intensity at the reference point which is the connecting point of a discrete system to a flexible beam were controlled actively by the control force obtained from the minimization of the cost function. The method of feedforward control was employed for the control strategy. The reduction levels of the dynamic response of a discrete system and the vibrational intensity at a reference point, and also the input power induced by the control force were evaluated numerically in cases of the three different cost functions. In comparison with the results obtained from the cost functions of one control factor, which is the dynamic response or the vibrational intensity, in most cases of the cost function of two control factors the better or similar results were obtained. As a conclusion, it is surely noted that both the dynamic response and the vibrational intensity of the vibrating system be controlled up to the expected level by using the single cost function having two control factors.

• Smart Structures and Systems
• /
• 제3권3호
• /
• pp.373-384
• /
• 2007

For structural health monitoring (SHM) of civil infrastructures, displacement is a good descriptor of the structural behavior under all the potential disturbances. However, it is not easy to measure displacement of civil infrastructures, since the conventional sensors need a reference point, and inaccessibility to the reference point is sometimes caused by the geographic conditions, such as a highway or river under a bridge, which makes installation of measuring devices time-consuming and costly, if not impossible. To resolve this issue, a visionbased real-time displacement measurement system using digital image processing techniques is developed. The effectiveness of the proposed system was verified by comparing the load carrying capacities of a steel-plate girder bridge obtained from the conventional sensor and the present system. Further, to simultaneously measure multiple points, a synchronized vision-based system is developed using master/slave system with wireless data communication. For the purpose of verification, the measured displacement by a synchronized vision-based system was compared with the data measured by conventional contact-type sensors, linear variable differential transformers (LVDT) from a laboratory test.

• 한국태양에너지학회 논문집
• /
• 제31권3호
• /
• pp.1-7
• /
• 2011

In the performance test for wind turbines of medium and large, The reference met-mast should be installed for measurement reference wind speed as IEC 61400-12-1 standards and design of booms for mounted an anemometer must be considered exactly. Boom-mounted cup anemometer are influenced by flow distortion of the mast and the boom. Therefore design of booms must be important so that flow distortion due to booms should be kept below 0.5%. But, in some cases at size of met-mast structure, the distance of boom from mast is longer then measurement of wind speed is impossible because of oscillation of boom-mounted anemometer. In this paper, We measured a wind speed at several point from mast and boom and we analyzed the error of wind speed at each point of measurement. Also, we will suggest a correction method using the data curve fitting about errors of wind speed between each point of mounted anemometer.