• Spatial Information Research
• /
• v.15 no.3
• /
• pp.301-310
• /
• 2007

There are 21,000 National Surveying Control Points (NSCP) made of stone for precise surveying nationwide. NSCPs that provide location information are usually buried at the top of a mountain for view points that cannot be used by the public. Recently, according to the growing ubiquitous computing generation, location-based information has become very important and a service that can be easily accessed by the public is needed. In this research, a new type of reference point for a location information service is proposed. It is an Intelligent Reference Point (IRP) equipped with RFID tags and a two-dimensional bar-code system. The IRP system is composed of an electronic tag component, a tag identification component, and an IRP service component. We designed the IRP receiver identifying RFID tag and two-dimensional barcode was designed using a PDA, digital camera, and an RFID receiver. Also designed was IRP input data and input information. Furthermore, the operation software was developed in a PDA for identifying IRP and using IRP the service, and the IRP positioning method was developed using a GIS spatial analysis.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.3
• /
• pp.343-352
• /
• 1998

The use of DGPS enhances standalone GPS accuracy and removes common errors from two or more receivers viewing the same satellites. The design of DGPS system contains a precise reference point which is able to compute the common errors to update the pseudo range of users receivers. It should take a great time and cost to provide precise and sufficient accuracy of the reference point. That is, it is natural to measure the parameters from satellites with specific survey instrument system, and then obtain that by post processing. The purpose of the study is to examine the bounds of accuracy which resulted from RTCM correction data transmitted from a simply designed DGPS system. In the paper, We design and evaluate the DGPS system based m the surveyed reference point, and Sub-optimal no by a Standalone GPS as well. As a result of the study, it is shown that the designed system may be applied to the specific marine activity in civilian and military.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.429-432
• /
• 2001

지문영상의 특이점(Singularities) 중의 하나인 Core Point는 대부분의 지문인증 시스템에서 기준점(Reference Point)으로 사용되고 있다. 또한 Core Point의 검출은 전체 지문인증 시스템의 가장 기본적인 단계로서 전체 시스템의 성능에 많은 영향을 준다. 본 논문에서는 지문 영상의 방향 패턴(Orientation Pattern)과 이의 리레이블링(Re-labeling)을 이용한 Core Point 검출 방법을 제안하고, 기존의 Poincare Index를 이용하는 방법 및 Sine Map을 이응한 방법과 비교, 분석하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1360-1363
• /
• 1996

EPD(End Point Detection) is used to decide etching degree of layer which must be removed at wafer etching process in plasma etching process which is one of the most important process in semiconductor manufacturing. In this thesis, the method which detects malfunction of etching process in real-time will be discussed. Several EPD signal traces are collected in normal plasma etching condition and used as reference EPD signal traces. Critical points can be detected by applying differentiation and zero-crossing techniques to reference EPD signal. Mean and standard deviation of critical parameters which is memorized from reference EPD signal are calculated and these determine the lower and higher limit of control chart. And by applying statical control chart to EPD signals which are collected in real etching process malfunctions of process are detected in real-time. By means of applying this method to the real etching process we prove our method can accurately detect the malfunction of etching process and can compensate disadvantage of current industrial method.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1138-1141
• /
• 2008

By defining a uniform reference point array corresponding to the 3D voxel array and abandoning voxels whose deviations from their respective reference points exceed a given tolerance, the distribution of voxels within the volumetric 3D image space gets uniform, effects of non-uniform distribution upon the image reconstructing are eased.

• Journal of KSNVE
• /
• v.10 no.5
• /
• pp.880-885
• /
• 2000

In a verical type, vibratory gyroscope, the coupled motion between the reference and sensing vibrations causes the zero-point output which means non-zero sensing vibration without angular velocity. This structural coupling leaks to an inherent discrepancy between the natural frequencies of the reference and sensing oscillations, causing the degradation of the sensing performance and dynamic stability. In this paper, the dynamic characteristics associated the coupling phenomenon are theoretically analyzed. Effects of reference frequency and coupling factor on the rotational direction and amplitude of elliptic oscillation are studied. A technique to predict the existence of curve veering of crossing in frequency trajectories is introduced to apply the design of micro gyroscopes with decoupled structures.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.575-578
• /
• 2004

The performance of an active power filter(APF) depends on the inverter characteristic, the control method, and the accuracy of reference signal generator. The accuracy of reference generator is the most critical item to determine the performance of active power filter. This paper introduces a novel reference signal generator composed of improved adaptive predictive filter. The performance of proposed reference signal generator was first verified through a simulation with MATLAB. Furthermore, the application of feasibility was evaluated through experimenting with a single-phase APF prototype based on the proposed reference generator, which was implemented using the TMS320C31 floating-point signal processor. Both simulations and experimental results confirm that our reference signal generator can be used successfully in practical active power filters.

• Nuclear Engineering and Technology
• /
• v.52 no.9
• /
• pp.2017-2024
• /
• 2020

In this study, a fractional order proportional integral derivative (FOPID) controller is designed to create the reference power trajectory and to conquer the uncertainties and external disturbances. A fractional nonlinear model was utilized to describe the nuclear reactor dynamic behaviour considering thermal-hydraulic effects. The controller parameters were tuned using optimization method in Matlab/Simulink. The FOPID controller was simulated using Matlab/Simulink and the controller performance was evaluated for Hard variation of the reference power and compared with that of integer order a proportional integral derivative (IOPID) controller by two models of fractional neutron point kinetic (FNPK) and classical neutron point kinetic (CNPK). Also, the FOPID controller robustness was appraised against the external disturbance and uncertainties. Simulation results showed that the FOPID controller has the faster response of the control attempt signal and the smaller tracking error with respect to the IOPID in tracking the reference power trajectory. In addition, the results demonstrated the ability of FOPID controller in disturbance rejection and exhibited the good robustness of controller against uncertainty.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.6
• /
• pp.1127-1134
• /
• 2002

The present paper provides an engineering J estimation equation for surface cracked plates under combined bending and tension. The proposed equation is based on the reference stress approach, and the most relevant normalising loads to define the reference stress for accurate J estimations are given for surface cracked plates under combined bending and tension. Comparisons with J results from extensive 3-D FE analyses, covering a wide range of crack geometry, plate geometry and loading combination, show overall good agreement not only at the deepest point but also at arbitrary points along the crack front. for pure tension, agreement between the estimated J and the FE results is excellent, even at the surface point. On the other hand, for pure bending and combined bending and tension, the estimated J values become less accurate for locations close to the surface point. Thus the results in this paper will be useful to assess short-term fracture or low cycle fatigue of surface defects in plates under combined bending and tension.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2009.04a
• /
• pp.355-360
• /
• 2009

Nowadays, the condition of overcrowded cities has raised a question which is insufficient land in cities, and has gotten worse because of the influx of the population continuously. It has rapidly constructed a skyscraper increasingly that the solution to secure a living space against these overcrowded cities until 2000, but these are already positioning itself as one of the new type of residence. The necessity of skyscraper as facilities of residence inside cities has be available both a solution for overcrowded cities and a meaning for a symbol of its represented a landmark. However, constructing skyscrapers indiscreetly can not guarantee dweller's life environment, and it contains risks unless design and facilities criteria are provided. Now, a skyscraper as a new substitute constituting a living space in the future for overcrowded cities deals with a systematic correlation between a city and construction. Therefore the aim of this study were to indicate a method for improvement of dweller's life environment at skyscraper through establishing a point of reference to inculcate them for a sustainable skyscraper from now on.