DOI QR코드

DOI QR Code

Engineering Elastic-Plastic Fracture Analysis for Semi-Elliptical Surface Cracked Plates Under Combined Bending and Tension

복합하중을 받는 평판에 존재하는 반타원 표면균열의 공학적 탄소성 파괴해석법

  • 심도준 (성균관대학교 기계공학부) ;
  • 김윤재 (성균관대학교 대학원 기계공학부) ;
  • 최재붕 (성균관대학교 대학원 기계공학부) ;
  • 김영진 (성균관대학교 대학원 기계공학부)
  • Published : 2002.06.01

Abstract

The present paper provides an engineering J estimation equation for surface cracked plates under combined bending and tension. The proposed equation is based on the reference stress approach, and the most relevant normalising loads to define the reference stress for accurate J estimations are given for surface cracked plates under combined bending and tension. Comparisons with J results from extensive 3-D FE analyses, covering a wide range of crack geometry, plate geometry and loading combination, show overall good agreement not only at the deepest point but also at arbitrary points along the crack front. for pure tension, agreement between the estimated J and the FE results is excellent, even at the surface point. On the other hand, for pure bending and combined bending and tension, the estimated J values become less accurate for locations close to the surface point. Thus the results in this paper will be useful to assess short-term fracture or low cycle fatigue of surface defects in plates under combined bending and tension.

Keywords

References

  1. Kumar, V. and German, M.D., 1988, 'Elastic-Plastic Fracture Analysis of Through-Wall and Surface Flaws in Cylinders,' EPRI Report NP-5596
  2. Zahoor, A., 1991, 'Ductile Fracture Handbook,' Novotech Corp
  3. Yagawa, G., Kitajima, Y and Veda, H., 1993, 'Three-Dimensional Fully Plastic Solutions for SemiElliptical Surface Cracks,' International Journal of Pressure Vessels & Piping, Vol. 53, pp. 457-510 https://doi.org/10.1016/0308-0161(93)90073-3
  4. McClung, R.C., Chell, G.G., Lee, YD., Russel, D.A. and Orient, G.E., 1999, 'Development of a Practical Methodology for Elastic-Plastic and Fully Plastic Fatigue Crack Growth,' NASA Report NASNCR1999-209428
  5. Ainsworth, R.A., 1984, 'The Assessment of Defects in Structures of Strain Hardening Materials,' Engineering Fracture Mechanics, Vol. 19, pp. 633-642 https://doi.org/10.1016/0013-7944(84)90096-1
  6. 1999, 'R6: Assessment of the Integrity of Structures Containing Defects,' Revision 3, British Energy Generation Ltd.
  7. Miller, A.G., 1988, 'Review of Limit Loads of Structures Containing Defects,' International Journal of Pressure Vessels & Piping, Vol. 32, pp. 191-327 https://doi.org/10.1016/0308-0161(88)90073-7
  8. 심도준, 김윤재, 최재봉, 김영진, 2001, '인장하중이 작용하는 평판에 존재하는 반타원 표면균열의 J-적분 계산식,' 대한기계학회논문집(A) 제25권 제11호, pp. 1777-1784
  9. Raju, I.S. and Newman Jr., lC., 1979, 'Stress Intensity Factors for a Wide Range of Semi-Elliptical Surface Cracks in Finite- Thickness Plates,' Engineering Fracture Mechanics, Vol. 11, pp. 817-829 https://doi.org/10.1016/0013-7944(79)90139-5
  10. Goodall, I.W., 1999, '$C^*$ for Partially-Penetrating Semi-Elliptic Flaws in Plates: Propagation Through the Thickness,' ICON Report ME 196/01 Issue 2
  11. Sattari-Far, I., 1994, 'Finite Element Analysis of Limit Loads for Surface Cracks in Plates,' International Journal of Pressure Vessels & Piping, Vol. 57,pp.237-243 https://doi.org/10.1016/0308-0161(94)90058-2
  12. Miller, A.G., 1988, 'J Estimation for Surface Defects; Further Results,' CEGB Memorandum TPRD /B/SM/SF95/M88
  13. Kim, Y.J., Huh, N.S. and Kim, Y.J., 'Reference Stress Based Elastic-Plastic Fracture Analysis for Circumferential Through Wall Cracked Pipes Under Combined Bending and Tension,' Engineering Fracture Mechanics, (in print) https://doi.org/10.1016/S0013-7944(01)00074-1
  14. 2000, 'ABAQUS User's manual,' Hibbitt, Karlson & Sorensen, Inc.
  15. 김영진, 석창성, 전현규, 최영환, 이정배, '원자력배관 건전성평가 전문가시스템 개발(I) 평가법 제시 및 재료물성치 추론,' 대한기계학회 논문집(A) 제20권 제2호, pp. 575-584