• Childhood Kidney Diseases
• /
• v.28 no.1
• /
• pp.16-26
• /
• 2024

Patients with kidney disease require frequent blood tests to monitor their kidney function, which is particularly difficult for young children and the elderly. For these people, the standard method is to evaluate serum creatinine or cystatin C or drug levels through venous sampling, but more recently, evaluation using dried blood spots has been used. This narrative review reports information from the literature on the use of dried blood spots to quantify the main markers used to detect kidney diseases. The ScienceDirect and PubMed databases were searched using the keywords: "dried blood on filter paper," "markers of renal function," "renal function," "creatinine," "cystatin C," "urea," "iohexol," and "iotalamate." Studies using animal samples were excluded, and only relevant articles in English or Spanish were considered. Creatinine was the most assessed biomarker in studies using dried blood spots to monitor kidney function, showing good performance in samples whose hematocrit levels were within normal reference values. According to the included studies, dried blood spots are a practical monitoring alternative for kidney disease. Validation parameters, such as sample and card type, volume, storage, internal patterns, and the effects of hematocrit are crucial to improving the reliability of these results.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.690-692
• /
• 2004

Differently from an existing analog control, because the digital control includes microprocessor basically, the digital control is enable to monitor internal parameters of DC-DC converter and to control output voltage remotely by communicating with a Windows based PC and also to monitor whether exact voltage is output or not. These things are impossible in an analog control. In this paper, a simple flyback converter is taken as a control target and is controlled by a microcontroller(TMS320F2812). This converter can make variable outputs 1.8V to 5V from 30V input voltage remotely in PC. Finally the response characteristics of a step reference voltage and in a steady state are experimented to verify the feasibility and the usefulness of this digital controlled converter.

• Biomedical Science Letters
• /
• v.11 no.3
• /
• pp.301-305
• /
• 2005

MR spectroscopy of intracellularly located $^{133}Cs$ has been used to monitor the uptake of Gd-EOB-DTPA by the isolated rat liver. As shown by ${31}P$ spectroscopy, accumulation of $^{133}Cs$ ions in hepatocytes does not produce detectable effects on the metabolism. The hepatic internalization of Gd-EOB-DTPA was followed by the paramagnetic relaxation enhancement of the intracellular $^{133}Cs$ ions, and confirmed by parallel quantitations of Gd and Cs run by inductively coupled plasma analysis of liver samples and aliquots of perfusate. Two peaks are observed at -22.0 and -23.5 ppm, with respect to the line of the external reference arbitarily set to 0 ppm. Upon rinsing of the extracellular compartment with regular K-H free of CsCl, the high-field resonance disappears within 20min. The intracellular concentration was confirmed by ICP, which gives a $Cs^+$ content of $22.0\pm3.5mM$. The relaxation data significantly underestimate the Gd content, suggesting a potential compartmentation of $Cs^+$ and the contrast agent.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.305-308
• /
• 2002

Because the digital control includes microprocessor different from an analog control, the digital control enables to monitor internal parameters of DC-DC converter and to control output voltage remotely by communicating with a Window based PC and also to monitor whether exact voltage is output or not. These things are impossible in an analog control. In this paper, a simple buck converter controlled by DSP is implemented. This converter outputs 0V to 5V from 15V input voltage and is controlled by a PD algorithm using DSP(TMS320C31). Finally the response characteristics of a step reference voltage and a digital controlled converter are analyzed to verify the usefulness of this converter.

• Proceedings of the KOSOMBE Conference
• /
• v.1998 no.11
• /
• pp.193-194
• /
• 1998

This paper describes a multi-functional EEG (electroencephalogram) software. The software manages the patient's EEG data systematically and analyzes the signal and display the parameters on a PC monitor in real-time. Since the software provides various parameters simultaneously, user can observe patients multilaterally. Reference patterns of CSA and DSA can be captured and displayed on top of the monitor. And user can mark events of surgical operation or patient's conditions, so it is possible to jump to the points of events directly, when reviewing the recorded file afterwards. Many convenient functions are equipped and these are operated by mouse clicks.

• Nuclear Engineering and Technology
• /
• v.50 no.1
• /
• pp.203-210
• /
• 2018

As the modernization of the nuclear instrumentation system progresses, research reactors have adopted digital wide-range neutron power measurement (DWRNPM) systems. These systems typically monitor the neutron flux across a range of over 10 decades. Because neutron detectors only measure the local neutron flux at their position, the local neutron flux must be converted to total reactor power through calibration, which involves mapping the local neutron flux level to a reference reactor power. Conventionally, the neutron power range is divided into smaller subranges because the neutron detector signal characteristics and the reference reactor power estimation methods are different for each subrange. Therefore, many factors should be considered when preparing the calibration procedure for DWRNPM channels. The main purpose of this work is to serve as a reference for performing the calibration of DWRNPM systems in research reactors. This work provides a comprehensive overview of the calibration of DWRNPM channels by describing the configuration of the DWRNPM system and by summarizing the theories of operation and the reference power estimation methods with their associated calibration procedure. The calibration procedure was actually performed during the commissioning of an open-pool type research reactor, and the results and experience are documented herein.

• Journal of Navigation and Port Research
• /
• v.38 no.4
• /
• pp.373-378
• /
• 2014

In order to prepare for recapitalization of differential GNSS (DGNSS) reference station and integrity monitor (RSIM) due to GNSS diversification, this paper focuses on differential correction algorithm using GPS/Galileo pesudorange. The technical standards on operation and broadcast of DGNSS RSIM are described as operation of differential GPS (DGPS) RSIM for conversion of DGNSS RSIM. Usually, in order to get the differential corrections of GNSS pesudorange, the system must know the real positions of satellites and user. Therefore, for calculating the position of Galileo satellites correctly, using the equation for calculating the SV position in Galileo ICD (Interface Control Document), it estimates the SV position based on Ephemeris data obtained from user receiver, and calculates the clock offset of satellite and user receiver, system time offset between GPS and Galileo, then determines the pseudorange corrections of GPS/Galileo. Based on a platform for performance verification connected with GPS/Galileo integrated signal simulator, it compared the PRC (pseudorange correction) errors of GPS and Galileo, analyzed the position errors of DGPS, DGalileo, and DGPS/DGalileo respectively. The proposed method was evaluated according to PRC errors and position accuracy at the simulation platform. When using the DGPS/DGalileo corrections, this paper could confirm that the results met the performance requirements of the RTCM.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.4
• /
• pp.824-830
• /
• 2010

In order to prepare for increasing performance requirement for Differential Global Navigation Satellite System (DGNSS) services of International Maritime Organization (IMO) and International Association of Lighthouse Authorities (IALA), this paper focuses on design of network-based Automatic Identification System (AIS) reference station system that can perform the functionality of Differential Global Positioning System (DGPS) reference station in an AIS base station system. AIS base station receives the differential corrections from the DGPS reference station, and it is not a method for transmitting the received differential corrections to onboard AIS units, but it is a method for generating the optimized differential corrections for onboard AIS units in AIS coverage. Therefore this paper proposes an algorithm for generating the differential corrections at AIS reference station, and performs the performance assessment of the proposed algorithm based on DGPS correction data measured from a DGPS reference station. Finally this paper discusses the test results and efficiency of the proposed system.

• 한국데이터정보과학회:학술대회논문집
• /
• 2003.05a
• /
• pp.89-95
• /
• 2003

Cumulative sum(CUSUM) control charts for monitoring dispersion matrix under multivariate normal process are proposed. Performances of the proposed CUSUM charts are measured in terms of average run length(ARL) by simulation. Numerical results show that small reference values of the proposed CUSUM chart is more efficient for small shifts in the production process.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.53-53
• /
• 2000

In this paper, we introduce the real-time skier-training software using DGPS. We used a PCS to receive the pseudorange correction messages from the reference station. We tested the performance of this system and could get a skier's position in real-time with high accuracy. It can help skier-trainers to monitor a skier's trajectory and teach him mote effectively This paper will show you how the system works and prove it has good performance.