• Title/Summary/Keyword: Reference Material

Search Result 1,342, Processing Time 0.036 seconds

A Study on Development of Management Targets and Evaluation of Target Achievement for Non-point Source Pollution Management in Saemangeum Watershed (새만금 비점오염원 관리지역에서의 목표설정 및 달성도 평가방법론 연구)

  • Kim, Eun-Jung;Park, Bae-Kyung;Kim, Yong-Seok;Rhew, Doug-Hee;Jung, Kwang-Wook
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.37 no.8
    • /
    • pp.480-491
    • /
    • 2015
  • In this study, methods using LDC (Load Duration Curve) and watershed model were suggested to develope management targets and evaluate target achievement for non-point source pollution management considering watershed and runoff characteristics and possibility for achievement of target. These methods were applied for Saemangeum watershed which was designated as nonpoint source pollution management area recently. Flow duration interval of 5 to 40% was selected as flow range for management considering runoff characteristics and TP was selected as indicator for management. Management targets were developed based on scenarios for non-point source pollutant reduction of management priority areas using LDC method and HSPF model which was calibrated using 4 years data (2009~2012). In the scenario of LID, road sweeping and 50% reduction in CSOs and untreated sewage at Jeonju A20 and 30% reduction in fertilizer and 50% in livestock NPS at Mankyung C03, Dongjin A14 and KobuA14, management targets for Mangyung bridge, Dongjin bridge, Jeonju stream and Gunpo bridge were developed as TP 0.38, 0.18, 0.64 and 0.16 mg/L respectively. When TP loads at the target stations were assumed to have been reduced by a certain percentage (10%), management targets for those target stations were developed as TP 0.35, 0.17, 0.60 and 0.15 mg/L respectively. The result of this study is expected to be used as reference material for management master plan, implementation plan and implementation assessment for non-point source management area.

A Rapid Analysis of 226Ra in Raw Materials and By-Products Using Gamma-ray Spectrometry (감마분광분석을 이용한 원료물질 및 공정부산물 중 226Ra 신속분석방법)

  • Lim, Chung-Sup;Chung, Kun-Ho;Kim, Chang-Jong;Ji, Young-Yong
    • Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
    • /
    • v.15 no.1
    • /
    • pp.35-44
    • /
    • 2017
  • A gamma-ray peak of $^{226}Ra$ (186.2 keV) overlaps with one of $^{235}U$ (185.7 keV) in a gamma-ray spectrometry system. Though reference peaks of $^{235}U$ can be used to correct the peak interference of $^{235}U$ in the analysis of $^{226}Ra$, this requires a complicated calculation process and a high limit of quantitation. On the other hand, evaluating $^{226}Ra$ using the correction constant in the overlapped peak can make a rapid measurement of $^{226}Ra$ without the complicated calculation process as well as overcome the disadvantage in the indirect measurement of $^{214}Bi$, which means the confinement of $^{222}Rn$ gas in a sample container and a time period to recover the secular equilibrium. About 93 samples with 6 species for raw-materials and by-products were prepared to evaluate the activity of $^{226}Ra$ using the correction constant. The results were compared with the activity of $^{214}Bi$, which means the indirect measurement of $^{226}Ra$, to validate the method of the direct measurement of $^{226}Ra$ using the correction constant. The difference between the direct and indirect measurement of $^{226}Ra$ was generally below about ${\pm}20%$. However, in the case of the phospho gypsum, a large error of about 50% was found in the comparison results, which indicates the disequilibrium between $^{238}U$ and $^{226}Ra$ in the materials. Application results of the contribution ratio of $^{226}Ra$ were below about ${\pm}10%$. The direct measurement of $^{226}Ra$ using the correction constant can be an effective method for its rapid measurement of raw materials and by-products because the activity of $^{226}Ra$ can be produced with a simple calculation without the consideration of the integrity of a sample container and the time period to recover the secular equilibrium.

A Study on the Comparative Art theory in the Arts and Crafts Movement and Post-impressionism (미술 공예 운동과 후기 인상주의 비교 예술론 연구)

  • 박연실
    • Archives of design research
    • /
    • v.20
    • /
    • pp.279-291
    • /
    • 1997
  • The history of modern design begins with the arts and crafts movement(1860). The importance of the movement which decorated the outset gave birth to all the trends of thought which would occur under the circumstances within it, and is deemed that the ideas of the figures who played an active part in the movement might be ceaselessly continued through the works and ideas of their outstanding juniors or purpils as a doctrine of the philosophy of design. Therefore, it might be a prerequisite that the significance and spirit of the movement, and its developing process should be addressed in detail in the first place, but for the limited space of this paper, it was intended to desvribe only the part which can be interpreted in duplicate, linked with post-impressionism. The subject of this thesis is about a theory of art in which both ideas of the movement(1860) and the post-impressionism(1910) are comparatively reviewed. The genre, strictly speaking, is classified into the history of painting, and there is a gap fo about an half century between the issues which are comparatively discussed here. Both the movements began in a same environmental place of England, specially the movement at Milieu in England, and since there is a common point that the representative runners of each movement, William Morries(1834-1896) and Roger Fry(1866-1934), belong to a same race of Engol-Saxon, their ideas coincide with an aesthetic scholar, H. Tanie's aesthetic interpretation method and the more important is, as being elucidated in the comment and aesthetic theory for which Roger Fry gave effort and activity in his later life, that when he read intensively Ruskin's books, $\ulcorner$Modern Painters$\lrcorner$and$\ulcorner$Stones of Venice$\lrcorner$he had solidified his idea of post-impressionism while giving approval and criticism on them. After all, as in a co-painter, Windyham Lewis's reference of 'Roger Fry's Too Late Morris Movement', he, inspired by the actual activities of Morris, played activities similar to that of Morris in which exhibiting and selling some of his decorative art works signed by him and the works of post-impressionism through (1913-1920). Herein, that is wished to add a remark by this author is a point that the author of$\ulcorner$Vision and Design$\lrcorner$, Roger Fry, has not be made a subject of discussion specially in the Korean world of design. So, with this case of a thesis, it's wished that many latent awakened, design persons in korea give efforts to researching into Roger Fry so that their findings could be officially announced in the would. By the way, what is tried to describe in this paper from now on is to analyse and review the origin of post-impressionism which idea was first coined in the art world through the 1st and 2nd exhibitions of 'Manet and Post-impressionism' which were opened each at the Grafton Gallery in 1910 and 1913 by him. And also, it is intended to review it through the art journals and some references by critics of the day in which favorable criticism or severe criticism were ready to comment through the opinions and influences of the coworkers of Roger Fry, say, Clive Bell, Desmond Maccarthy, etc. and of himself as a main axis, on the art ideas of Gauguin, Gogh, Matisse, and Cezanne whose works were the typical ones participated and exhibited in those 1st and 2nd exhibitions.

  • PDF

Study of Iodide Adsorption on Organobentonite using X-ray Absorption Spectroscopy (X-선 흡수분광기를 이용한 유기벤토나이트의 요오드 흡착연구)

  • Yoon, Ji-Hae;Ha, Ju-Young;Hwang, Jin-Yeon;Hwang, Byoung-Hoon;Gordon E. Brown, Jr.
    • Journal of the Mineralogical Society of Korea
    • /
    • v.22 no.1
    • /
    • pp.23-34
    • /
    • 2009
  • The adsorption of iodide on untreated bentonite and bentonites modified with organic cation (i.e., hexadecylpyridinium chloride monohydrate ($HDP^+$)) was investigated, and the organobentonites were characterized using uptake measurements, ${\mu}$-XRD, and electrophoretic mobilities measurement. Uptake measurements indicate that bentonite has a high affinity for $HDP^+$. Our ${\mu}$-XRD study indicates that organobentonites significantly expanded in basal spacing and organic cations were substantially intercalated into the interlayer spaces of bentonite. The electrophoretic mobility indicates that organobentonite tht is modified with organic cations in excess of the CEC of bentonite is completely different from untreated bentonite in the surface charge distribution. We found significant differences in adsorption capacities of iodide depending on the bentonite properties as follows: iodide adsorption capacities were 439 mmol/kg for the bentonite modified with $HDP^+$ at an equivalent amount corresponding to 200% of the CEC of bentonite whereas no adsorption of iodide was observed for the untreated bentonite. The molecular environments of iodine adsorbed on organobentonites were further studied using I K-edge and $L_{III}$-edge x-ray absorption spectroscopy (XAS). The X-ray absorption near-edge structure (XANES) of iodine spectra from organobentonites was similar to that of KI reference solution. Linear combination fitting of EXAFS data suggests the fraction of iodine reacted with the organic compound increased with increasing loading of the organic compound on organobentonites. In this study, we observed significant differences in the adsorption environments of iodide depending on the modified property of bentonite and suggest that an organobentonite has potential as reactive barrier material around a nuclear waste repository containing anionic radioactive iodide.

Development of 'the safety' theme-based integrated teaching·learning process plans for the middle school Home Economics Instruction (중학교 가정과 수업을 위한 '안전' 주제 중심 통합 교수·학습 과정안 개발)

  • Kim, Nam Eun;Chae, Jung Hyun;Cho, Jae Soon
    • Journal of Korean Home Economics Education Association
    • /
    • v.28 no.1
    • /
    • pp.19-39
    • /
    • 2016
  • The purpose of this study was to develop the safety theme-based integrated teaching learning process plans for the middle school Home Economics(HE) Instruction and ultimately to contribute for the middle school students to live their safe lives. To achieve the goals of this study, HE curriculum documents from the 1st to the 2015 revision were analyzed and a survey was conducted to identify the middle school students' current status of safety accidents and needs on the HE safety education. The respondents of the survey were the 512 students of one ${\bigcirc}{\bigcirc}$ Girls' Middle School in Busan. And then, the seven integrated themes were selected, each seven integrated theme-networks were formed, and safety theme-based Home Economics curriculum and learning materials were developed. The results of this study were as the follows. The safety education content has continually been included from the first HE curriculum of 1954 to the 2015 revised HE curriculum. The middle school student respondents highly needed the content of 'the methods to deal with sexual violence and prostitution prevention', 'suicide prevention', and 'bullying net' for the HE safety education. All the 42 items were needed for the HE safety education by the respondents. The safety theme-based HE teaching learning process plans developed finally included the seven integrated themes, which were (1) dietary life safety, (2) adolescents' sex and safety, (3) adolescents' relationships with friends and safety, (4) family life and safety, (5) dwelling life and safety, (6) adolescents' egos and safety, and (7) social environment and safety. Each integrated theme consisted of three to six small themes, which amounted to total 28(for 35 lessons). Each small theme was presented with learning objectives and particular goals. The total 157 learning materials including the Home Economics curriculum were developed, which offered learning objectives and content for each safety theme, total 28 teaching and learning plans(for 35 lessons) were developed, which offered specific instructions for the easy implementation of the curriculum in the classroom, 28 PPTs, 25 film materials, four reading materials, 61 workbooks, 14 activity sheets, 16 evaluation sheets, 3 test sheets, 2 reference materials, and 4 learning material models(the refrigerator model, traffic lights for discussions, food tray model and stickers, and food mileage card). In this study, the safety education themes of 'clothing life and safety', 'conflict and safety', 'professional life and safety', and 'consumer and safety' were not addressed because these theme were not needed highly by the respondents. Therefore, for the further development of the teaching learning process plans for the HE safety education, it is necessary to develop and evaluate the teaching learning process plans to address the themes of 'clothing life and safety', 'conflict and safety', 'professional life and safety', and 'consumer and safety'.

Anti-aging Effect of Inula britannica var. chinensis Flower Extract According to the Extraction Temperature (추출 온도에 따른 금불초 꽃 추출물의 항노화 효능)

  • Jeon, Ji Min;Yoo, Dae Sung;Cheon, Jong Woo;Kwon, Soon Sik;Jeon, So Ha;Park, Soo Nam
    • Journal of the Society of Cosmetic Scientists of Korea
    • /
    • v.40 no.1
    • /
    • pp.109-120
    • /
    • 2014
  • In this study, the extracts of Inula britannica var. chinensis (I. britannica) flower were extracted at three different temperatures (room temperature, $45^{\circ}C$, and $65^{\circ}C$) and their anti-aging effects were studied. Before investigating anti-aging effects of the extracts, their cytotoxicity was tested on B16F10, Hs683, and HaCaT cells. All extracts showed no cytotoxicity at the concentration less than 0.1% (v/v). Melanin synthesis inhibitory activities in B16F10 cells and reverse transcriptase polymerase chain reaction (RT-PCR) in Hs683 and HaCaT cells were used to see their anti-aging effects. The room temperature extract at 0.1% showed 24.5% melanin synthesis inhibition, which was better than the $45^{\circ}C$ and $65^{\circ}C$ extracts. In addition, expression rates of the room temperature extract at 0.1% on HAS-1, HAS-2, and HAS-3 related to hyaluronan synthase genes were 123.3%, 137.8%, 133.2%, respectively. which were higher than reference material of L-ascorbic acid. Expression rates of the $45^{\circ}C$ extract at 0.1% on TNF-${\alpha}$, COX-2, and IL-$1{\alpha}$, which are inflammatory related genes, was suppressed to 30.3%, 12.8%, 25.7%, respectively. It was better in anti-in flammatory effect than the room temperature and $65^{\circ}C$ extracts. As results, we showed that I. britannica var. chinensis flower extarcts decreased melanin production and expression of inflammatory related genes and increased the expression rate of hyaluronan synthase genes. Thus, it is believed that the extracts affect anti-aging effects of skin through whitening, moisturizing, and anti-inflammatory processes and could be applicable to cosmetics as a functional cosmetic ingredient.

INFLUENCE OF SEVERAL POSTS AND IPS-EMPRESS INGOT THICKNESS ON THE FINAL SHADE OF ALL-CERAMIC CROWNS (수종의 post와 IPS-Empress Ingot 두께가 전부 도재 수복물 최종색조에 미치는 영향)

  • Bok Won-Mi;Choi Keun-Bae;Park Charn-Woon;Ahn Seung-Geun
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.42 no.5
    • /
    • pp.514-523
    • /
    • 2004
  • Statement of problem: All-ceramic restorations have been advocated for superior esthetics. Various post and core systems have been used to improve the strength of damaged teeth, but it is unclear whether they affect the final shade of finished all-ceramic restorations. Purpose: The influence of different types of post and core systems on light transmission through all-ceramic crowns was assessed by spectrophotometric analysis. Also the masking effect of different thickness of ceramic ingot was evaluated. Material and Methods : Forty-five sample disks (15mm in diameter) at several thickness(1.0, 1.5, 2.0mm) and value(shade 100, 200, 300) were made in heat pressed ceramic(IPS-Empress). Background specimens simulating gold-alloy cast posts(Type III casting gold alloy), metal posts(Ni-Cr casting alloy) and ceramic posts(CosmoPost) were fabrica-ted. Resin composite(Z250, A3 shade) was used as a tooth substrate reference. For each combination, the change in color was measured with a spectrophotometer. Readings were performed for 2 conditions (1) ability of ceramic to mask the core in relation to its thickness(1.0, 1.5, or 2.0mm) ; (2) influence of post and core types on the final color of the ceramic. Data were recorded according to the CIE $L^*a^*b^*$ systems and color difference($\Delta$E) was calculated. Results: 100 shade ingot: when ceramic thickness was 1.0mm, $\Delta$E value for ceramic post larger than 1 but $\Delta$E value for metal and gold post was larger than 2. For ceramic thickness of 1.5mm, only $\Delta$E value for metal was larger than 2, and the other samples' $\Delta$E value was smaller than 2. For ceramic thickness of 2.0mm, $\Delta$E values for all specimens was smaller than 2. 200 shade ingot: when ceramic thickness was 1.0mm, $\Delta$E value for ceramic post was smaller than 1 but $\Delta$E value for metal and gold post was larger than 2. For ceramic thickness of 1.5 mm, only the $\Delta$E value for metal was larger than 2, and the other samples' $\Delta$E value was smaller than 2. For ceramic thickness of 2.0mm, $\Delta$E values for all specimens was smaller than 1. 300 shade ingot: when ceramic thickness was 1.0mm, only $\Delta$E value for metal was larger than 2 and the other samples' $\Delta$E value was smaller than 2. For ceramic thickness of 1.5mm, $\Delta$E values for all specimens was smaller than 1. For ceramic thickness of 2.0mm, $\Delta$E values for all specimens was smaller than 1. Conclusion: The final esthetic result of the IPS-Empress glass-ceramic restoration was not affected by the presence of different core materials when the thickness was more than 2.0 mm. When ceramic thickness decreases to 1.5mm, it is advised to take the substrate aspects into consideration. If the ceramic thickness is less than 1.0mm, using the tooth color matched substrate is strongly recommended.

The Analysis of a Cerrobend Compensator and a Electronic Compensator Designed by a Radiation Treatment Planning System (방사선치료계획장치로 설계된 Cerrobend 선량보상체와 전자 선량보상체의 제작 및 특성 분석)

  • Nah Byung-Sik;Chung Woong-Ki;Ahn Sung-Ja;Nam Taek-keun;Yoon Mi-Sun;Song Ju-Young
    • Progress in Medical Physics
    • /
    • v.16 no.2
    • /
    • pp.82-88
    • /
    • 2005
  • In this study, the physical compensator made with the high density material, Cerrobend, and the electronic compensator realized by the movement of a dynamic multileaf collimator were analyzed in order to verify the properness of a design function in the commercial RTP (radiation treatment planning) system, Eclipse. The CT images of a phantom composed of the regions of five different thickness were acquired and the proper compensator which can make homogeneous dose distribution at the reference depth was designed in the RTP. The frame for the casting of Cerrobend compensator was made with a computerized automatic styrofoam cutting device and the Millennium MLC-120 was used for the electronic compensator. All the dose values and isodose distributions were measured with a radiographic EDR2 film. The deviation of a dose distribution was $\pm0.99 cGy\;and\;\pm1.82cGy$ in each case of a Cerrobend compensator and a electronic compensator compared with a $\pm13.93 cGy$ deviation in an open beam condition. Which showed the proper function of the designed compensators in the view point of a homogeneous dose distribution. When the absolute dose value was analyzed, the Cerrobend compensator showed a $+3.83\%$ error and the electronic compensator showed a $-4.37\%$ error in comparison with a dose value which was calculated in the RTP. These errors can be admtted as an reasonable results that approve the accuracy of the compensator design in the RTP considering the error in the process of the manufacturing of the Cerrobend compensator and the limitation of a film in the absolute dosimetry.

  • PDF

1910's Tap-gol Park Construction Process through Design Document Interpretation (설계도서를 중심으로 본 1910년대 탑골공원의 성립과정)

  • Kim, Hai-Gyoung;Kim, Young-Soo;Yun, Hye-Jin
    • Journal of the Korean Institute of Traditional Landscape Architecture
    • /
    • v.31 no.2
    • /
    • pp.103-117
    • /
    • 2013
  • This research analyzed the spatial components and establishment of the Tap-gol Park according to the plans between 1897 to 1916 when the discussions on the construction of the park began and it was accomplished as an urban park. The results are as follows. The establishment of Tap-gol Park can be divided by three period. Firstly, Tap-gol Park was owned by the royal family from 1987 to 1904. The discussions on construction of Tap-gol Park as a first urban park of Gyeongseong(京城) in 1897, and the private houses were tear down in order to secure land for the park in 1899. Gates and fences surrounding of Tap-gol Park were organized and it was opened in 1902 based on park plane of turtle - shaped. The octagonal pavilion for 'Lee-Wang-Jik musical band(李王職音樂隊)' was relocated in the southwestern part of the park in 1903. Secondly, Tap-gol Park was used actively by the public between 1910 to 1913, because it was opened for individuals. Also The boundary of Park were changed by surrounding facilities and recreational facilities and benefits was complemented for users. Tap-gol park was opened at nighttime in August 1913. Tap-gol Park was used as a place of amusement park. Thirdly, commercial facilities were made as the park facility between 1914 to 1916. The purpose of 'Kkikdajeom(喫茶店)' was similar to the one of modern cafes. It was built as a typical Japanese tea-house with a small pond having an island and a bridge constructed inside. With the increase of usage of Tap-gol Park as a recreational area by the citizens in 1916, the pavilion as a rest area and toilet as amenities were supplemented. Superintendent's office was equipped too. Simple chairs made from the wooden logs were installed around greenhouse, concert hall, the Wongaksa Buddhist temple(圓覺寺址十層石塔), and the flower garden was fenced round. After the relocation of Yongsan music band to Tap-gol Park, the existing concert hall was demolished. The shape of the park which was seen from the pictures of the magazines of 1920s were achieved as early as 1916. The importance of this research includes the basis to revise the errors of the preexistence researches and value of historical material of the design plan reference of the park which was accomplished during the Japanese colonial era. Also this research is to study on the spatial components of the modern landscape architecture and parks.

Establishment of Choline Analysis in Infant Formulas and Follow-up Formulas by Ion Chromatograph (이온크로마토그래프를 이용한 조제유류 및 영아용·성장기용 조제식 중 콜린 함량 분석법 연구)

  • Hwang, Kyung Mi;Ham, Hyeon Suk;Lee, Hwa Jung;Kang, Yoon Jung;Yoon, Hae Seong;Hong, Jin Hwan;Lee, Hyoun Young;Kim, Cheon Hoe;Oh, Keum Soon
    • Journal of Food Hygiene and Safety
    • /
    • v.32 no.5
    • /
    • pp.411-417
    • /
    • 2017
  • This study was conducted to establish the analysis method for the contents of choline in infant formulas and follow-up formulas by ion chromatograph (IC). To optimize the method, we compared several conditions for extraction, purification and instrumental measurement using spiked samples and certified reference material (CRM; NIST SRM 1849a) as test materials. IC method for choline was established using Ion Pac CG column and 18 mM $H_2SO_4$ mobile phase. The parameters of validation were specificity, linearity, LOD, LOQ, recovery, accuracy, precision and repeatability. The specificity was confirmed by the retention time and the linearity, $R_2$ was over 0.999 in range of 0.5~10 mg/L. The detection limit and quantification limit were 0.14, 0.43 mg/L. The accuracy and precision of this method using CRM were 95%, 2.1% respectively. Optimized methods were applied in sample analysis to verify the reliability. All the tested products were acceptable contents of choline compared with component specification for nutrition labeling. The standard operating procedures were prepared for choline to provide experimental information and to strengthen the management of nutrient in infant formula and follow-up formula.