• 한국통신학회논문지
• /
• 제37권7A호
• /
• pp.552-559
• /
• 2012

In this paper, we introduce a frame structure of the satellite TDMA network and the synchronization method thereof. The primary station transmits a special burst called reference burst which provides reference time to network. By using this reference burst all nodes achieve initial acquisition and synchronization. We consider time drift due to the node and satellite mobility, time shift due to the node position, Doppler shift due to the node mobility and frequency offsets as important factors of the frame structure. Simulation results show that the proposed frame structure and synchronization method guarantee accurate synchronization performance when the node is even in low SNR as well as 25 kHz frequency offsets.

• Journal of Electrical Engineering and Technology
• /
• 제11권1호
• /
• pp.86-92
• /
• 2016

Upon detecting a frequency event in a power system, the stepwise inertial control (SIC) of a wind turbine generator (WTG) instantly increases the power output for a preset period so as to arrest the frequency drop. Afterwards, SIC rapidly reduces the WTG output to avert over-deceleration (OD). However, such a rapid output reduction may act as a power deficit in the power system, and thereby cause a second frequency dip. In this paper, a hybrid reference function for the stable SIC of a doubly-fed induction generator is proposed to prevent OD while improving the frequency nadir (FN). To achieve this objective, a reference function is separately defined prior to and after the FN. In order to improve the FN when an event is detected, the reference is instantly increased by a constant and then maintained until the FN. This constant is determined by considering the power margin and available kinetic energy. To prevent OD, the reference decays with the rotor speed after the FN. The performance of the proposed scheme was validated under various wind speed conditions and wind power penetration levels using an EMTP-RV simulator. The results clearly demonstrate that the scheme successfully prevents OD while improving the FN at different wind conditions and wind power penetration levels. Furthermore, the scheme is adaptive to the size of a frequency event.

• 전자공학회논문지
• /
• 제53권5호
• /
• pp.77-86
• /
• 2016

본 논문에서는 full / half-rate의 이중 모드로 동작하는 기준 클록을 사용하지 않는 클록 데이터 복원 회로와 그 동작 알고리즘에 관하여 기술한다. 클록 데이터 복원 회로는 주파수 검출기, 위상 검출기, 차지 펌프 및 루프 필터, 그리고 전압 제어 발진기와 알고리즘 구현을 위한 디지털 블록으로 구성되어 있다. 주파수 검출기와 위상 검출기는 클록 데이터 복원 회로의 이중 모드 기능을 위하여 full / half-rate에서 동작하며 주파수 검출기는 이에 더해 일반 주파수 검출기의 불감대 영역에서도 데이터 전송률과 클록 주파수 차이를 판별할 수 있다. 제안한 이중 모드 클록 데이터 복원 회로를 시뮬레이션을 통해 검증한 결과 클록 데이터 복원에 전체 1.2-1.3 us의 동기화 시간이 소요되었으며, 0.5-UI 지터를 인가하였을 때 full-rate (2.7 Gb/s)와 half-rate (5.4 Gb/s) 모드에서 모두 안정적으로 클록 데이터를 복원한다.

• 대한전기학회논문지
• /
• 제38권2호
• /
• pp.83-92
• /
• 1989

This paper presents a load frequency control by optimal linear tracking, which can be well adapted to practical power systems with successive load disturbances. Conventional Load Frequency Controls (LEC's) have a feedback control scheme of the state error deviated from the post-disturbance steady state. This requires the modification of reference everytime the system encounters load changes. In this study, a new feedback scheme of LEC is developed by using the optimal linear tracking method with a fixed reference. As a result, the proposed LFC, which requires no reference modification, can be efficiently applied to power systems with successive disturbances such as load changes due to the on-off operations of reclosers or feeder switches. Another feature of the proposed LFC is that it adopts an algorithm to calculate an optimal post-fault steady state with the consideration of control input changes. The proposed LFC has been tested for a 2-area power system, which shows that it can be well adapted to successive load disturbances with good frequency response.

• 전력전자학회논문지
• /
• 제20권4호
• /
• pp.356-362
• /
• 2015

This paper presents a current control strategy in the synchronous reference frame for a single-phase PWM converter, which ensures sinusoidal input current control under the distorted source voltage and frequency condition. Given that the distorted source voltage distorts the phase angle for PWM converter control, the input current contains the same harmonics as the source voltage. Aside from the distorted voltage, the variation in source frequency reduces the performance of input current control. To achieve sinusoidal input current control under the distorted source voltage and frequency condition, this paper proposes a compensation strategy of current reference with the distortion component extracted from the phase angle and a detection strategy of frequency variation from the output of a synchronous reference frame phase-lock loop. The experimental results confirm the validity of the proposed method under the distorted source voltage and frequency condition.

• 한국ITS학회 논문지
• /
• 제5권1호
• /
• pp.45-54
• /
• 2006

주파수 선택적 채널에서의 신호왜곡은 수신기에서의 채널추정을 어렵게 하여 펄스 타입의 UWB 시스템의 경우 동기 회로의 구현이 어렵다는 단점이 있다. 본 논문에서는 구현상 난점인 채널추정과 동기회로 설계를 간단히 기준 펄스를 함께 전송함으로써 해결하는 TR(Transmitted Reference), DTR(Differential TR) UWB을 분석하고 FSK 변조방법을 이용한 새로운 형태의 PRM(Pulse Repetition Modulation) UWB 방식을 제안한다. 기준 펄스를 이용한 통신의 수신기 구조인 Auto-correlation(AcR) 수신기가 잡음이 섞인 기준펄스를 이용하는 경우 성능저하 정도를 확률적으로 분석한다. 또한 SNR에 영향을 미치는 AcR 적분기의 적분구간에 대한 분석을 시뮬레이션을 통하여 분석한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.499-502
• /
• 1998

Most popular disk block replacement polices are LRU(Least Recently Used)policy and LFU(Least Frequently Used)policy. The LRU policy replaces blocks according to the most recent reference without considering the frequency of reference. The LFU policy replaces blocks according to the frequency of reference without considering the recently of the reference. In this thesis, a policy called LFR(least Frequently Use & Not Used Recently) disk block replacement policy is presented. The LFR policy subsumes the LFU policy and the NUR policy. The spectrum of the LFR policy exists between the LFU policy and the NUR policy because we co give different weight to each reference of a block. The implementation shows LFR policy outperforms the previously implemente LRU policy.

• 전기학회논문지
• /
• 제57권2호
• /
• pp.268-275
• /
• 2008

In this paper, we introduce a new method for detecting and estimating faults on a power line using the time-frequency domain reflectometry system. The system rests upon time-frequency signal analysis and uses a chirp signal which is multiplied by Gaussian envelope. The chirp signal is used as a reference signal, and we can get the reflected signal from a fault on a wire. To detect and estimate faults, we analyze the reflected signal by Wigner time-frequency distribution function and normalized time-frequency cross correlation function. In this paper we design an optimal reference signal for power line and implement a system for estimating fault distance on a power line with the TFDR implemented by PXI equipments. This approach is verified by some experiments with HIV 2.25mm power lines.

• Journal of Electrical Engineering and Technology
• /
• 제10권6호
• /
• pp.2221-2227
• /
• 2015

To arrest a frequency nadir, a stepwise inertial control (SIC) scheme generates a constant active power reference signal of a wind turbine generator (WTG) immediately after a disturbance and maintains it for the predetermined time. From that point, however, the reference of a WTG abruptly decreases to restore the rotor speed for the predefined period. The abrupt decrease of WTG output power will inevitably cause a second frequency dip. In this paper, we propose a modified SIC scheme of a doubly-fed induction generator (DFIG) that can prevent a second frequency dip. A reference value of the modified SIC scheme consists of a reference for the maximum power point tracking control and a constant value. The former is set to be proportional to the cube of the rotor speed; the latter is determined so that the rotor speed does not reach the minimum operating limit by considering the mechanical power curve of a DFIG. The performance of the modified SIC was investigated for a 100 MW aggregated DFIG-based wind power plant under various wind conditions using an EMTP-RV simulator. The results show that the proposed SIC scheme significantly increases the frequency nadir without causing a second frequency dip.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제2권1호
• /
• pp.41-48
• /
• 2002

This paper presents a 18-mW, 2.5-㎓ fractional-N frequency synthesizer with l-bit $4^{th}$-order interpolative delta-sigma ($\Delta{\;}$\sum$)modulator to suppress fractional spurious tones while reducing in-band phase noise. A fractional-N frequency synthesizer with a quadruple prescaler has been designed and implemented in a $0.5-\mu\textrm{m}$ 15-GHz $f_t$ BiCMOS. Synthesizing 2.1 GHzwith less than 200 Hz resolution, it exhibits an in-band phase noise of less than -85 dBc/Hz at 1 KHz offset frequency with a reference spur of -85 dBc and no fractional spurs. The synthesizer also shows phase noise of -139 dBc/Hz at an offset frequency of 1.2 MHz from a 2.1GHz center frequency.